一种微型光开关的设计与仿真分析

介绍了一种新型的聚酰亚胺(PI)悬臂梁式电磁驱动微机电系统(MEMS)光开关,并对其总体结构进行了设计与仿真分析.运用有限元分析的方法,设计了永磁体的最佳尺寸并优化了悬臂梁的结构;分析了聚酰亚胺悬臂梁的扭转力、电磁力与挠度的关系.当输入电流为75 mA时,聚酰亚胺悬臂梁达到平衡时的挠度约为1.02 mm,能够满足器件转换光路的要求.     

基于耦合场量子受激拉曼散射的太赫兹波辐射

使用两块长度各为65 mm的MgO:LiNbO3和无掺杂LiNbO3晶体,以1064nm的Q开关Nd:YAG激光器作为抽运光源,在12 mJ/pulse的抽运光能量下得到频率范围为0.34～2.90 THz的电磁辐射.分析表明,激光入射使LiNbO3晶体中具有电磁特性的横光学声子可以和入射光子形成耦合场量子.作为一种电磁特性的元激发,LINbO3晶体的耦合场量子的辐射场频率覆盖部分太赫兹频段范围,并可通过耦合场量子受激拉曼散射过程辐射THz波.根据耦合场量子辐射理论,通过分析晶体的耦合场量子色散特性曲线,可以确定该晶体能否辐射THz波及其带宽范围.     

导电介质中电磁波相移常数与振幅衰减常数的方向关系的讨论

对文献上给出的非均匀电磁波在同一均匀导电介质中传播时,电磁波的相移常数和振幅衰减常数方向之间满足定量关系的结论,重新进行了分析和推导,利用电磁波在导电介质界面的边界条件,给出了两种情况下的相移常数和振幅衰减常数的表达式,以及它们与界面法线的夹角正弦的表达式.结果表明,在同一均匀导电介质中,非均匀电磁波的相移常数的方向和振幅衰减常数的方向之间一般不满足定量关系.     

强激光与固体靶作用产生的表面电子加速和辐射研究

利用单电子在固体靶表面准静态电磁场中运动的模型和非线性汤姆孙散射理论,研究了以大角度斜入射的强激光照射在固体靶表面产生的沿靶面方向发射的高能超热电子的运动及其产生的电磁辐射脉冲. 数值模拟表明,靶表面的电子在靶面附近的准静态电磁场和反射的激光场中作振荡. 当电子振荡频率接近激光频率时,电子被有效加速,被加速的电子主要沿靶面方向运动并产生向前的阿秒脉冲辐射. 讨论了电子在加速前的不同初始速度分布对辐射脉冲的时间和空间特性的影响,模拟了不同初始状态的多电子相干辐射脉冲的频谱特性. 关键词： 表面准静态电磁场 超热电子 阿秒脉冲 相干辐射     

装有电路板孔阵矩形腔对快上升前沿电磁脉冲的屏蔽效能

 介绍了快上升前沿电磁脉冲的特性,用传输线法分析了孔阵矩形腔屏蔽效能的基本原理。将基本公式作进一步修正,使其能计算矩形腔内装有印刷电路板（PCB）的情形。对修正的传输线模型计算公式进行了扩展,使之能计算任意极化方向时的情况。计算和仿真结果表明: 当频率低于主谐振频率时,测量点离孔阵越近,屏蔽效能越差,同时低频段的屏蔽效能比高频段的要好;孔阵的屏蔽效能比相同面积单孔的要好;装有PCB腔体的屏蔽效能比空腔的要好,这在谐振区域内尤为突出;PCB板尺寸越大,屏蔽效能越好;屏蔽效能随极化角度的递增而增加;屏蔽体越小,屏蔽效果越好。     

利用电磁法研究HMX与TATB混合钝感炸药的冲击起爆特性

为研究含有少量奥克托金(HMX)且以三氨基三硝基苯(TATB)为基的高能钝感炸药PBX-3的冲击起爆反应增长规律,采用火炮驱动蓝宝石飞片的方法和铝基组合式电磁粒子速度计技术进行了一维平面冲击实验。通过实验测量撞击表面及内部不同深度处的冲击波后粒子速度,得到PBX-3炸药的Hugoniot关系。根据冲击波示踪器所测数据绘制了炸药到爆轰的时间-距离(x-t)图,获得了反映炸药冲击起爆性能的Pop关系。将入射压力为12.964 GPa时达到爆轰的6条速度曲线修整成相同零点,通过读取6条曲线的分离点即反应区末端的C-J点,计算出化学反应区时间和宽度。     

Mechanically robust conductive carbon clusters confined ethylene methyl acrylate–based flexible composites for superior shielding effectiveness

Arresting of conducting carbon black into polymeric matrix to develop flexible and light weight composite has been a widely practiced platform. Extensive development of telecommunication creates a major vexations regarding radiation pollution. Thereafter, we have been motivated to develop low‐cost, flexible composites of specialty carbon black VXC (Vulcan XC 72)–filled ethylene methyl acrylate (EMA) by mechanical mixing technique. Developed composite has significant conductivity (6.67 × 10⁻⁴ S cm⁻¹) with promising mechanical and thermal properties. Dispersion of high‐structured carbon blacks in EMA was investigated by small angle X‐ray scattering to reflect the dependency of conducting mesh formation on dispersion. Interconnected filler network development has been visualized by field emission scanning electron microscope and high‐resolution transmission electron microscope. Electromagnetic interference shielding value in the X band has calculated to be 30.8 dB. Such features can make this EVXC (EMA‐Vulcan XC 72) composite a useful alternate for flexible electromagnetic interference shielding material.     

Combined static electromagnetic radiation and plant extract contribute to the biosynthesis of instable nanosilver responsible for the growth of microstructures

The instant biosynthesis of silver nanoparticles under static electromagnetic induction, its antibacterial activity and its post exposure monitoring were reported here. A mix of silver nitrate solution and Ruta chalepensis leaf extract was irradiated by a static electromagnetic field (SMF) of 200 mT. The characteristics and stability of the biosynthesized silver nanoparticles (Ag NPs) were determined. Compared to the non-irradiated exposure, the morphology and state of the obtained material change once the exposition to SMF is turned off. Shifting from 453 to 473 nm, the percentage of the needles shaped silver nanoparticles increased and continue to win and dominate the biomixture toward the spherical silver nanoparticles. TEM microscopy showed a wide range of silver materials designed in different nanoscale morphology and beyond where they undergo major changes affecting mainly the size, shape and form (dispersity) of nanosilver.     

Characterization of nano-composite oxide ceramics and monitoring of oxide thin film growth by laser-induced breakdown spectroscopy

Multi-component oxide ceramics and epitaxial oxide thin films are analyzed by laser-induced breakdown spectroscopy (LIBS). Furthermore, pulsed-laser deposition (PLD) of thin films is investigated by long-term monitoring of the optical plasma emission. Both nano-composite high-temperature superconductors (HTS) consisting of YBa₂Cu₃O_7 − δ bulk and Y₂Ba₄MCuO_x (M-2411, M = Ag, Nb) nano-particles, and semiconducting ZnO doped with Aluminum and Lithium are ablated by nano-second laser pulses. The plasma emission is recorded using grating spectrometers with intensified gated detectors. The LIBS signals of nano-particles correlate with the nominal content of the M-2411 phase (0–15 mol%) and reveal a strong signal of Ytterbium impurity (3–35 ppm). In situ monitoring of the PLD process shows element signals that are stable for more than 10,000 laser pulses for both HTS and ZnO ceramics. The relative concentration of elements in thin films and ceramics as determined by LIBS is almost the same.     

复杂电磁环境下兵力部署优化模型

兵力部署通常由任务区分、兵力编组和兵力配置顺序构成.从战场指挥与控制的角度看,以上3个阶段的局部优化并不意味兵力部署的优化,因此有必要建立具有反馈特征和循环机制的全局优化模型.以任务区分、兵力编组、兵力配置和兵力部署之间的逻辑关系为桥梁,以部队应对复杂电磁环境主要措施为控制点,从事件的角度研究"进行兵力部署"事件的最大发生概率,提出了它与"进行任务区分"、"进行兵力编组"和"进行兵力配置"事件发生概率的最优匹配关系.