脉冲功率晶闸管反向恢复特性

为建立有效的晶闸管模型来仿真晶闸管关断时过电压,减小晶闸管过压损坏的概率,以最大通流150 kA、耐压5.2 kV的脉冲晶闸管为研究对象,将其前置于脉冲形成单元回路中作为大功率开关使用,记录放电过程中晶闸管两端电压及电流。实验数据表明：恢复过程中的电流下降率、反向恢复电荷、反向恢复电流峰值随通态电流峰值的增大而增大,晶闸管关断时间随通态电流峰值的增大而减小。此外,在关断过程中,当电流下降率在-50~1000 A/s时,电流下降率与电流峰值为线性关系。因此,在大脉冲电流条件下,推导反向恢复过程参数与通态电流参数的关系时电流下降率可用与电流峰值的线性关系代替。基于Matlab仿真平台,建立了具有反向恢复过程的脉冲晶闸管模型。该模型仿真得到的晶闸管反向恢复电流峰值与实测结果较为吻合,反向恢复电压尚待进一步修正。     

螺旋槽回旋行波管高频特性分析

 在Foulds等人对螺旋槽结构进行深入分析的基础上,考虑了槽区内高次模式对慢波结构高频特性的影响。结果表明：槽宽较小时,结论与其结论吻合较好; 槽宽较大时,计算结果与其有较大差别。此外,讨论了螺旋槽结构参数对高频特性的影响,结果表明：除槽宽外的其它结构参数固定时,存在一个最佳的δ/L值,可以获得较弱的色散和较大的横向场幅值,适合做回旋行波管互作用结构。     

垂直入射时无限长分层柱电磁散射的改进算法及应用

结合非均匀球粒子对平面波散射的散射场计算的改进算法,提出了平面波垂直入射无限长分层圆柱散射场快速稳定而有效的改进电磁散射算法。与已有算法相比,改进算法所能计算的无限长非均匀介质圆柱的尺寸参量突破10000,计算层数达到106,并且计算时间很短,最多仅为几秒。该算法可以用于不同的波段以及不同领域的任意无耗或吸收无限长圆柱体散射场的计算。最后将该算法应用于梯度折射率聚合物光纤(GI-POF)散射特性的研究,为非接触、在线测量聚合物光纤折射率分布提供了理论依据。     

Analysis of Coupling and Radiation Properties for an Improved Dielectric Waveguide Directional Coupler Utilizing a Tapering Left-Handed Slab Core

The coupling and radiation characteristics of an improved dielectric waveguide directional coupler with a tapering left-handed slab core located in the coupling region are analyzed by the staircase approximation method, which combines the building block approach and multi-mode network theory with a rigorous mode-matching procedure. Particular attentions are directed toward the radiation characteristics under different structural parameters of the coupler. Numerical results indicate that the proposed coupler is very promising by shortening the coupling length significantly while keeping the radiation loss at a low level.     

Angular reconstruction of a lead scintillating-fiber sandwiched electromagnetic calorimeter

The Neighbor Cell Deposited Energy Ratio （NCDER） is a new method that is proposed to reconstruct incidence position in a single layer for a 3-dimensional imaging electromagnetic calorimeter （ECAL）. This method was applied to reconstruct the ECAL test beam data for the Alpha Magnetic Spectrometer-02 （AMS-02）. The results show that this method can achieve an angular resolution of 7.36±0.08°/√E＋0.28±0.02° in the determination of the photon＇s direction, which is much more precise than that obtained with the commonly-adopted Center of Gravity （COG） method （8.4±0.1°/E＋0.8±0.3°）. Furthermore, since it uses only the properties of electromagnetic showers, this new method could also be used for other type of fine grain sampling calorimeters.     

一个关于勒让德多项式的积分公式及其简单应用——圆形带电环和电流环的静态电磁势

给出了一个关于勒让德多项式的积分公式及其证明,用该公式和叠加法方便快捷地导出了圆形带电环和电流环的静态电磁势.     

The effect of PVA (Bi2O3-doped) interfacial layer and series resistance on electrical characteristics of Au/n-Si (110) Schottky barrier diodes (SBDs)

Two types of Schottky Barrier Diodes (SBDs) with and without PVA (Bi₂O₃-doped) polymeric interfacial layer, were fabricated and measured at room temperature in order to investigate the effects of the PVA (Bi₂O₃-doped) interfacial layer on the main electrical parameters such as the ideality factor (n), zero-bias barrier height (Φ_B0), series resistance (R_s) and interface-state density (N_ss). Electrical parameters of these two diodes were calculated from the current-voltage (I-V) characteristics and compared with each other. The values of Φ_B0, n and R_s for SBDs without polymeric interfacial layer are 0.71 eV, 1.44 and 4775 Ω, respectively. The values of Φ_B0, n and R_s for SBDs with PVA (Bi₂O₃-doped) polymeric interfacial layer are 0.74 eV, 3.49 and 10,030 Ω, respectively. For two SBDs, the energy density distribution profiles of interface states (N_ss) were obtained from forward-bias I-V measurements by taking the bias dependence of R_s of these devices into account. The values of N_ss obtained for the SBD with PVA (Bi₂O₃-doped) polymeric interfacial layer are smaller than those of the SBD without polymeric interfacial layer.     

质子交换膜燃料电池动态启动特性的实验研究

实际应用时燃料电池的运行条件会随时间不断地变化,因此是一个非稳态过程.本文研究了在不同的加湿条件以及反应气流量下电池的启动特性.结果表明:随着气体流量的增大,电池启动速度加快;对电池加湿有利于提高电池的启动性能.     

川西平原还田秸秆腐解释放DOM的光谱特征

为掌握川西平原保护性耕作模式下还田秸秆腐解过程的光谱学特性,追溯还田秸秆对川西地区生态系统结构的影响过程,采集了该地区主要种植作物油菜、水稻的秸秆样本,利用紫外-可见吸收光谱(UV-Vis)、三维荧光光谱(3D-EEM)和傅里叶变换红外光谱(FTIR)三种光谱学表征手段,阐明秸秆各腐解阶段溶解性有机质(DOM)的光谱学特征,对比不同农作物秸秆快速淋溶阶段DOM(0~0.5 d)与腐解过程(0.5~90 d)的光谱学特征差异性,解析其变化机理。结果表明： 还田秸秆腐解过程中DOM的光谱学特性差异明显,伴随着芳香性物质的溶出、降解以及新生腐殖类物质的形成;由秸秆快速淋溶阶段释放DOM的E₂/E₃值最大而SUVA₂₅₄值最小可知该阶段溶出的物质芳香性和分子量相对较小;其芳香性组分的溶出主要集中在腐解前期(≤10 d),表现于该阶段E₂/E₃值逐渐减小且SUVA₂₅₄值逐渐增大,DOM中多糖峰、芳香C和酰胺峰变弱;难分解的纤维素、半纤维素和大分子蛋白质主要在腐解后期被降解;DOM中酚类、羰基类和羧酸类物质数量增加,使得DOM与有机污染物、金属离子的相互作用增强,进而调节农田土壤中污染物的迁移转化过程。本研究为川西平原秸秆还田的环境意义提供了基础数据和新证据,为该地区农业废弃物处理与资源化提供了依据。