Polyion Detection via All‐solid‐contact Paper‐based Polyion‐sensitive Polymeric Membrane Electrodes

The first all‐solid‐contact paper‐based single‐use polyion‐sensitive ion‐selective electrodes (ISEs) are described. These polyion‐sensitive ISEs are fabricated using cellulose filter paper coated with a carbon ink conductive layer. A polyanion sensing membrane is cast on a section of the coated paper and the sensor is insulated, resulting in a disposable, single‐use device. Various polyanions are shown to yield large negative potentiometric responses when using these disposable devices for direct polyanion detection. These new sensors are further demonstrated to be useful in indirect polycation detection when polycations (i. e., polyquaterniums (PQs)) are titrated with polyanionic dextran sulfate (DS). Titrations monitored using these paper‐based, all‐solid‐contact devices yield endpoints proportional to the given PQ concentration present in the test sample.     

Calix[4]arene‐Based Bis(Nitric Oxide) Complexes: Synthesis,Physical Properties,and Structural Characterization

Calix[4]arene‐based molecules hold great promise as candidate sensors and storage materials for nitric oxide (NO), owing to their unprecedented binding affinity for NO. However, the structure of calix[4]arene is complicated by the availability of four possible conformers: 1,3‐alternate, 1,2‐alternate, cone, and partial cone (paco). Whilst complexes of NO with several of these conformers have previously been established, the 1,2‐alternate conformer complex, that is, [1,2‐alter ? NO]⁺, has not been previously reported. Herein, we determine the crystal structure of the NO complex with the 1,2‐alternate conformer for the first time. In addition, we have also found that the 1,2‐alternate and 1,3‐alternate conformers can combine with two NO molecules to form stable bis(nitric oxide) complexes. These new complexes, which exhibit remarkable binding capacity for the construction of NO‐storage molecules, were characterized by using X‐ray crystallography and NMR, IR, and UV/Vis spectroscopy. These findings will extend our understanding of the interactions between nitric oxide and cofacially and non‐cofacially arrayed aromatic rings, and we expect them to aid in the design and development of new supramolecular sensors and storage materials for NO with high capacity and efficacy.     

A Bifunctional Luminescent Metal–Organic Framework for the Sensing of Paraquat and Fe3+ Ions in Water

The hydrothermal reaction of Zn²⁺ ions with a mixture of two ligands, Hcptpy and H₃btc (Hcptpy=4‐(4‐carboxyphenyl)‐2,2′:4′,4′′‐terpyridine; H₃btc=1,3,5‐benzenetricarboxylic acid), led to the formation of a 3D metal–organic framework (MOF) with 1D channels, [Zn₂(cptpy)(btc)(H₂O)]_n ( 1 ), which was structurally characterized by using single‐crystal X‐ray diffraction (SXRD). In MOF 1 , two independent Zn²⁺ ions were interconnected by btc^3? ligands to form a 1D chain, whilst adjacent Zn²⁺ ions were alternately bridged by cptpy^? ligands to generate a 2D sheet, which was further linked by 1D chains to form a 3D framework with a new (3,3,4,4)‐connected topology. Furthermore, compound 1 also exhibited excellent stability towards air and water and, more importantly, luminescence experiments indicated that it could serve as a probe for the sensitive detection of paraquat (PAQ) and Fe³⁺ ions in aqueous solution.     

Skin‐worn Soft Microfluidic Potentiometric Detection System

A flexible skin‐mounted microfluidic potentiometric device for simultaneous electrochemical monitoring of sodium and potassium in sweat is presented. The wearable device allows efficient natural sweat pumping to the potentiometric detection chamber, containing solid‐contact ion‐selective Na⁺ and K⁺ electrodes, during exercise activity. The fabricated microchip electrolyte‐sensing device displays good analytical performance and addresses sweat mixing and carry‐over issues of early epidermal potentiometric sensors. Such soft skin‐worn microchip platform integrates potentiometric measurement, microfluidic technologies with flexible electronics for real‐time wireless data transmission to mobile devices. The new fully integrated microfluidic electrolyte‐detection device paves the way for practical fitness and health monitoring applications.     

Wearable Sweat Sensors: Background and Current Trends

Sweat‐related physiology research has been well established over the years. However, it has only been around ten years that sweat‐based sensing devices started to be explored. With the recent advancements in wearable activity and physiology monitoring devices, sweat was investigated for its contents similar to blood and corresponding wearable devices were studied intensively. This article provides a thorough review on sweating mechanisms, sweat sensing devices, and electronic technologies for sweat sensor implementations. Potential future directions and recommendations based on current research trends were provided in each section. This review aims to offer a unique perspective from both physiology and engineering point‐of‐view to draw a complete landscape of the sweat sensing research.     

Carbon‐based Nanosensors for Salicylate Determination in Pharmaceutical Preparations

Thiourea derivative‐based carbon paste electrode (TUD1‐CPE) was constructed as a potentiometric sensor for the determination of salicylate anion in pharmaceutical formulations, Aspocid® and Aspirin®. The optimized CPE contained 45.5 % graphite, 0.5 % reduced graphene oxide (rGO), 46.0 % nitrophenyl octyl ether (NPOE) plasticizer, 5.0 % TUD1 ionophore, and 3.0 % tridodecylmethyl ammonium chloride as additive. The incorporation of NPOE of high dielectric constant, and rGO in electrode caused better performance of the sensor; Nernstian response of 59.0 mV decade^?1 in the concentration range of 10^?1–10^?5 mole L^?1, a detection limit of 1×10^?5 mole L^?1 in a very short response time of 6 seconds. The prepared sensor showed high selectivity against similar anions (i. e. , benzoate, I^?, SCN^?). Selectivity was confirmed by calculating the formation constant (K_β) using sandwich membrane method, where K_β for TUD1‐salicylate is 10^0.43. Theoretical calculations at DFT‐B3LY/6‐31G** level of theory were performed to find interaction mechanism, Energies of HOMO and LUMO orbitals, non‐linear optical (NLO) properties (the electronic dipole moment (μ), first‐order hyperpolarizability (β), the hyper‐Rayleigh scattering (β_HRS) and the depolarization ratio (DR)), and other global properties; these calculations showed lower values of β and DR, higher value of β_HRS, and the shortest lengths of the four N?H bonds between TUD1 and salicylate which confirm their strong complexation and salicylate‐selectivity. Also, all the studied anion‐TUD1 exhibited relatively high NLO properties, and these results were considered as a preliminary study for investigating new types of NLO bearing materials. The sensors were applied successfully for the determination of salicylate anion in Aspocid® and Aspirin®.     

Acid-base sensors based on novel quinone-type dyes

We present a detailed study on the acid-base behaviour of a family of "potentially antiaromatic" p-benzoquinonediimine ligands. These 12pi electron molecules can be considered as constituted of two chemically connected but electronically not conjugated 6pi-electron subunits. Upon successive protonation, "mono" and "double" cyanine-type chromophores are generated in solution and allow a precise and sensitive spectrophotometric detection. These molecules represent a new class of tunable quinones whose electronic and structural properties can be triggered by proton input, as established by a complete physico-chemical study involving a combination of potentiometric and spectrophotometric methods (absorption and emission).     

Chemically Sensitive Field‐Effect Transistors and Chemiresistors: New Materials and Device Structures

Electronic sensor technology remains of widespread and intense interest. There are compelling needs to detect chemical species ranging from small molecules dispersed in the gas phase to complex biopolymers in aqueous solution. This review describes some recent advances in three main areas: chemically sensitive resistors (chemiresistors, CRs) including inorganic and organic based devices, field effect transistors (FETs) with semiconducting layers and/or gates with chemical sensitivity, and sensors based on the differential conductivity of nanotubes and nanowires. Results reported in the last two to three years are emphasized, highlighting some current trends in the development of sensors for applications such as diagnostics, process monitoring, and security.     

Nanopore‐Based Confined Spaces for Single‐Molecular Analysis

The field of nanopore sensing at the single‐molecular level is in a “boom” period. Such nanopores, which are either composed of biological materials or are fabricated from solid‐state substrates, offer a unique confined space that is compatible with the single‐molecular scale. Under the influence of an electrical field, such single‐biomolecular interfaces can read single‐molecular information and, if appropriately fine‐tuned, each molecule plays its individual ionic rhythm to compose a “molecular symphony”. Over the past few decades, many research groups have worked on nanopore‐based single‐molecular sensors for a range of thrilling chemical and clinical applications. Furthermore, for the past decade, we have also focused on nanopore‐based sensors. In this Minireview, we summarize the recent developments in fundamental research and applications in this area, along with data algorithms and advances in hardware, which act as infrastructure for the electrochemical analysis.