Improved efficiency of organic solar cells with modified hole‐extraction layers

The aim of this work has been to study the influence of modified hole‐extraction layers on the performance of organic solar cells (OSCs) based on blends of poly (3‐hexylthiophene) and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester. The hole‐extraction layers consist of poly (3,4‐ethylene dioxythiophene):polystyrene sulfonic acid (PEDOT:PSS) doped with different concentrations of bromine. Compared with pristine OSC without adding bromine to the hole‐extraction layer, the bromine‐doped OSCs show a 49% increase in the power conversion efficiency (from 2.12 to 3.16%), which could be attributed to the increase of electrical and optical properties of PEDOT:PSS films after the addition of bromine. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 125–128, 2012     

Rule of 100:An inherent limitation or performance measure in oxidative coupling of methane?

The oxidative coupling of methane over La 2 O 3 /CaO type-catalyst in a fixed-bed reactor is studied under a wide range of operating conditions(973相似文献   

A field-reversal method for measuring the parameters of a ferroelectric liquid crystal

A method for measuring the spontaneous polarization P _s, the switching time, the rotational viscosity γ_φ, and the d.c. conductivity σ is presented. The possibilities of estimating the azimuthal angle φ₀, the dielectric anisotropy δε and the dielectric permittivity ε_⊥ in the same experiment are also discussed. It is explicitly shown that the switching delay, though primarily dependent on the material and the applied field, is also dependent on the geometry of the cell.     

Chain transfer agents in cationic photopolymerization of a bis‐cycloaliphatic epoxide monomer: Kinetic and physical property effects

The effects of chain transfer agents (CTA) on cationic ring‐opening polymerization of 3,4‐epoxycyclohexylmethyl‐3′,4′‐epoxycyclohexane carboxylate (EEC) were explored. EEC was polymerized in the presence of various CTAs, and epoxide conversions monitored via Raman spectroscopy. Polymer films were prepared and analyzed by dynamic mechanical analysis. Many of the organic alcohols studied greatly enhanced epoxide polymerization rates and conversion levels. The gel fraction of polymer specimens decreased rapidly with increasing amounts of octanol (gel fraction >90% up to 0.3 equiv OH) but remained high with increasing amounts of 1,2‐propanediol (gel fraction >90% up to 0.6 equiv OH). Increasing the size of primary alcohols had little effect on the polymerization rates and conversions. The polymerization rate decreased with increasing alcohol substitution (1°>2°>3°). Acidic alcohols had very low impact on conversion and polymerization rates relative to the neat epoxy resin. The glass transition temperature was inversely related to the size and amount of CTA. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

骨架结构多孔TiO2薄膜增强染料敏化太阳能电池性能

以空心球状TiO₂为基体、以片状TiO₂为骨架,采用刮刀法制备了染料敏化太阳能电池的多孔TiO₂光阳极薄膜。光电转化效率测试结果表明,当作为骨架支撑材料的片状TiO₂含量为20wt%时,光阳极薄膜组装成太阳能电池的光电转化效率达到最高值4.53%,比商业P25制备的无孔无骨架TiO₂薄膜电池(4.06%)及无骨架结构的多孔TiO₂薄膜电池(4.17%)的性能均有显著提高。当片状TiO₂的最佳含量为20wt%电池薄膜厚度为33 μm时,太阳能电池光电转化效率进一步提升为7.06%。光电性能增强的原因是骨架结构有利于快速传输电子并增大染料吸附量。本研究通过设计制备具有骨架结构的多孔TiO₂薄膜为提高染料敏化太阳能电池性能提供了新的思路。