On the determination of dynamic surface tensions by means of a modified bubble pressure method

A method for the determination of the dynamic surface tension of surfactant solutions is presented which allows to cover adsorption times down to 10 seconds. This method is based on the determination of the pressure inside two communicating bubbles. There is no deformation of the solution/air interface during the experimental procedure. Hence, in evaluating the kinetic data no surface area enlargement has to be taken into account. An automatically operating procedure should allow to cover adsorption times down to approximately one second and should improve the measuring accuracy substantially. Experimental investigations with aqueous n-decanoic acid solutions using the method proposed provided evidence that decanoic acid is adsorbed by a diffusioncontrolled mechanism.     

Copper(II) Complexes of ω‐Hydroxy‐Functionalized N‐Salicylidenehydrazides show pH‐Controlled Switching between Dicationic Dimers and Neutral One‐Dimensional Coordination Polymers

New copper(II) complexes of the hydrazone ligands H₂salhyhb, H₂salhyhp, and H₂salhyhh, derived from salicylaldehyde and ω‐hydroxy carbonic acid hydrazides, have been synthesized and physically characterized. Two fundamental structures were found in solid state depending on the pH‐value of the reaction solution. Acidic conditions lead to the formation of the di‐μ‐phenoxo‐bridged dicationic complex dimers [{Cu(Hsalhyhb)}₂]²⁺ ( 1a ), [{Cu(Hsalhyhp)}₂]²⁺ ( 2a ), and [{Cu(Hsalhyhh)}₂]²⁺ ( 3a ), isolated as perchlorate salts. The dimeric complexes show strong antiferromagnetic coupling with J = ?399 ( 1a ), ?410 ( 2a ), and ?311 cm^?1 ( 3a ). Higher pH‐values resulted in the aggregation of neutral copper ligand fragments to the one‐dimensional coordination polymers [{Cu(salhyhb)}_n] ( 1b ), [{Cu(salhyhp)}_n] ( 2b ), and [{Cu(salhyhh)}_n] ( 3b ). 3b has been examined by means of X‐ray crystallography and represents the first example of a structurally characterized neutral copper(II) N‐salicylidenehydrazide complex without additional ligands. The magnetic interactions in the polymers are also antiferromagnetic with J = ?125 ( 1b ), ?136 ( 2b ), and ?148 cm^?1 ( 3b ), but strongly reduced compared to the corresponding dimeric complexes. The two basic structure types can be reversibly interconverted simply by pH‐control.     

AIBN/SmCl3/乳酸体系催化甲基丙烯酸甲酯的反向原子转移自由基聚合

利用稀土金属化合物三氯化钐(SmCl3)和二氯化钐(SmCl2)之间的单电子转移反应,以AIBN/SmCl3/乳酸作为反向原子转移自由基聚合(ReverseATRP)的催化体系,成功地实现了甲基丙烯酸甲酯(MMA)的反向ATRP,并考察了温度、溶剂和组分比对聚合反应的影响.MMA在该体系中的聚合反应是一级反应,所得PMMA的分子量与单体转化率成正比,聚合物的分子量分布较窄(Mw/Mn<1.5),具有活性聚合的特征.     

Atom transfer radical homo‐ and block copolymerization of methyl 1‐bicyclobutanecarboxylate

A non‐olefinic monomer, methyl 1‐bicyclobutanecarboxylate (MBC), was successfully polymerized by the controlled/“living” atom transfer radical polymerization (ATRP) technique, resulting in a well‐defined homopolymer, PMBC, with only cyclobutane ring units in the polymer chain. An AB block copolymer poly(methyl 1‐bicyclobutanecarboxylate)‐b‐polystyrene (PMBC‐b‐PS), having an all‐ring unit segment, was also synthesized with narrow polydispersity and designed number‐average molecular weight in addition to precise end groups. The ¹H NMR spectra, glass‐transition temperature, and thermal stability of PMBC, PMBC‐b‐PS, and PS‐b‐PMBC were investigated. The experimental results showed that the cyclobutane rings in the two block polymers improved their thermal stability. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1929–1936, 2002     

Shape-controlled synthesis of metal nanostructures: the case of silver

The concept of shape-controlled synthesis is discussed by investigating the growth mechanisms for silver nanocubes, nanowires, and nanospheres produced through a polymer-mediated polyol process. Experimental parameters, such as the concentration of AgNO(3) (the precursor to silver), the molar ratio between poly(vinylpyrrolidone) (PVP, the capping agent) and AgNO(3), and the strength of chemical interaction between PVP and various crystallographic planes of silver, were found to determine the crystallinity of seeds (e.g., single crystal versus decahedral multiply twinned particles). In turn, the crystallinity of a seed and the extent of the PVP coverage on the seed were both instrumental in controlling the morphology of final product. The ability to generate silver nanostructures with well-defined morphologies provides a great opportunity to experimentally and systematically study the relationship between their properties and geometric shapes.     

REVERSE ATOM TRANSFER RADICAL POLYMERIZATION OF STYRENE WITH COPPER-BASED CATALYST

 "Living"/controlled radical polymerization of styrene was carried out with diethyl 2,3-dicyano-2,3-diphenylsuccinate (DCDPS)/CuCl₂/bipyridine (bipy) initiation system at 120℃. The molecular weights of resultant PSt increased with the monomer conversion and the polydispersities were in the range of 1.37 ～ 1.52. A linear ln([M]o/[M])versus time plot was also obtained indicating the constant concentration of growing radicals during the polymerization with this initiation system. End group analysis by ¹H-NMR spectroscopic studies showed that the end groups of the polymer obtained is cω-functionalized by a chlorine group from the catalyst and a-functionalized by a (carbethoxy-cyano-phenyl)methyl group from the fragments of the initiator. Having C1 atom at the chain end, the PSt obtained can be used as a macroinitiator to promote a chain-extension reaction with fresh St and block copolymerization reaction with a second monomer, such as methyl methacrylate, in the presence of CuC1/bipy catalyst via a conventional ATRP process.     

Synthesis of comb‐shaped poly(methyl methacrylate)‐b‐poly(polytetrahydrofuran acrylate) under 60Co γ‐ray irradiation

Comb‐shaped graft copolymers with poly(methyl methacrylate) as a handle were synthesized by the macromonomer technique in two steps. First, polytetrahydrofuran acrylate (A‐PTHF), prepared by the living cationic ring‐opening polymerization of tetrahydrofuran, underwent homopolymerization with 1‐(ethoxycarbonyl)prop‐1‐yl dithiobenzoate as an initiator under ⁶⁰Co γ irradiation at room temperature; Second, the handle of the comb‐shaped copolymers was prepared by the block copolymerization of methyl methacrylate with P(A‐PTHF) as a macroinitiator under ⁶⁰Co γ irradiation. The two‐step polymerizations were proved to be controlled with the following evidence: the straight line of ln[M]₀/[M] versus the polymerization time, the linear increase in the number‐average molecular weight with the conversion, and the relatively narrow molecular weight distribution. The structures of the P(A‐PTHF) and final comb‐shaped copolymers were characterized by ¹H NMR spectroscopy and gel permeation chromatography. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3367–3378, 2002     

Steric structure and thermodynamic aspects of the complexes of dysprosium(iii) with aminobenzoic acids in aqueous solutions

Steric structures of dysprosium(III) aminobenzoate complexes with the 11 and 12 molar ratio in aqueous solutions were determined on the basis of pH-metric and paramagnetic birefringence data. An increase in conjugation observed for the series of the acids,viz., benzoic,meta-, ortho-, andpara-aminobenzoic acids, results in the increased stability of the complexes with the 11 and 12 composition. In the case ofpara-aminobenzoic acid, the polyhedra [DyL(H₂O)₆]²⁺ and [DyL₂(H₂O)₄]⁺ are cubes with the ligands coordinated to one and two edges, respectively. In the case ofmeta-aminobenzoic acid, the polyhedra [DyL(H₂O)₆]²⁺ and [DyL₂(H₂O)₄]⁺ are a dodecahedron with the ligand coordinated to one edge and a square anti-prism with the ligands coordinated to two edges, respectively. In the case ofortho-aminobenzoic acid, both the 11 and 12 complexes have structures that are intermediate between the structures ofmeta- andpara-aminobenzoic acids.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1767–1770, October, 1994.     

Hydroxypropyl chitosan bearing beta-cyclodextrin cavities: synthesis and slow release of its inclusion complex with a model hydrophobic drug

Hydroxypropyl chitosan-graft-carboxymethyl beta-cyclodextrin (HPCH-g-CM beta-CD) was synthesized by grafting CM beta-CD onto HPCH using water soluble 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) as the condensing agent. Due to the presence of hydrophobic beta-CD rings onto the HPCH backbone, this polymer can be used as a matrix for controlled drug release. The adsorption of a hydrophobic model drug, ketoprofen, by HPCH-g-CM beta-CD microparticles (using tripolyphosphate as an ionic crosslinking agent) fitted well in the Langmuir isotherm equation. The drug dissolution profile showed that HPCH-g-CM beta-CD microparticles provided a slower release of the entrapped ketoprofen than chitosan, and the release behavior was influenced by the pH value of the medium. These results suggest that beta-CD grafted with chitosan derivatives may become a potential biodegradable delivery system to control the release of hydrophobic drugs with pH-responsive capability.     

Experimental study of the induced flow birefringence of a suspension of rigid particles at the transition from Couette flow to Taylor vortex flow

The flow birefringence induced in solutions of rigid particles is studied experimentally in the region of the axisymmetrical Taylor vortex flow which arises once the velocity gradient G in the annular gap of a conventional Couette cell reaches a critical value G _c .The measurements are performed for several values of G > G _c and for 10 radial observation points in the annular gap. Solutions of two types of rigid particles are investigated: the first is a suspension of flattened clay particles like bentonite, while the second contains rod-like particles of tobacco mosaic virus (TMV). The variations of the birefringence intensity n and of the extinction angle measured in the domain of the axisymmetrical flow show a different behavior according to the shape of the particle in solution. This fact is confirmed theoretically with a good agreement for the measurements performed with solutions of flat particles.