基因芯片共焦扫描仪的分辨率与信噪比

介绍基因芯片共焦扫描仪的系统结构和工作原理，讨论基因芯片共焦扫描仪的光学成像系统二维分辨率与信噪比之间的定量关系。所得出的结果对于选择共焦显微成像系统的参数和评价共焦显微成像系统的性能具有重要的意义。     

GaAs／AlGaAs发光二极管列阵场分布特性的电光测量

应用一种新颖的无损伤测量技术－连续波电光检测法（ＣＷＥＯＰ）对ＧａＡｓ／ＧａＡｌＡｓ单异质结发光管列阵电场分布进行了扫描测量。实验结果反映了器件内电流注入的方向和载流子扩展情况；通过比较各单元电场分布，反映器件发光均匀性。文中详细介绍了测量原理、实验装置和实验结果及讨论，最后用计算机对电场分布作了模拟计算并与实验结果进行了对照。     

显微镜产品质量光电检测的研究

显微镜产品质量光电检测的实施是光、机、光电、计算机技术的综合运用。本文是笔者多年来研究成果总结，包括了已研制出的ＸＪ－１型生物显微镜多功能光电质检仪及其改进；对显微镜离焦性能检测的探索，共可实现显微镜产品质量七个考核项目的检测与等级分拣。这些成果给显微镜行业提供了先进的检测工具；同时为发展我国显微镜产品检测技术、提高检测水平起积极的促进作用。     

环形线电荷的电场分布

给出了圆环形线电荷电场分布的理论公式，并利用计算机计算出其具体分布规律。     

Influence of hydrogen bonding on the properties of water molecules adsorbed in zeolite frameworks

Three hydrated aluminosilicate frameworks—LiABW, NaNAT, and BaEDI—are partly optimized with the periodic Hartree–Fock CRYSTAL95 code. In particular, we optimized the positions of the adsorbed water molecules including the positions of the framework cations (ABW, NAT) or part of the framework atomic positions (ABW). This allowed us to compare cation–water clusters in the gas and adsorbed states and discuss the influence of hydrogen bonding to the framework oxygen atoms or to the neighbor water molecules on the atomic properties (quadrupole coupling constant, anisotropy of electric field gradient) of the adsorbed water molecules. The LiBIK structure obtained from X‐ray diffraction is also considered to illustrate the hydrogen bonds occurring between adsorbed water molecules. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2003     

壳聚糖固体聚合物电池用膜

壳聚糖是甲壳素脱乙酰基的产物，具有良好的成膜性、生物相容性、环保以及价格低廉等特点。作为一种碱性高分子膜材料，近年来已成为聚电解质研究领域中的研究热点。本文综述了壳聚糖固体聚合物电池用膜的研究现状，其改性工艺主要包括共混、化学改性、质子酸掺杂、无机盐掺杂等方法，比较了各种工艺处理后壳聚糖固体聚合物电解质膜的性能差异，并就壳聚糖固体聚合物电解质膜中离子传导机理中有待解决的问题进行探讨，并提出了进一步改进壳聚糖固体聚合物电解质膜性能的研究思路。     

血清蛋白-荧光素复合物单扫极谱波与应用

在0．08mol／L的HAc中，荧光素与牛血清白蛋白(BSA)或人血清白蛋白(HSA)相互作用形成复合物。复合物使荧光素在-0．58V(vs．SCE)处的还原峰电流增大，峰电流的增大值与加入的BSA或HSA的浓度在一定的范围内呈线性关系。BSA在2—24μg／mL范围内呈线性关系，检出限为1μg／mL；HSA在2—22μg／mL范围里呈线性关系，检出限为0．8μg／mL。应用该法测定了人血清蛋白样品，结果令人满意。     

Surface solid-state interactions in copper-nickel-cement catalysts for hydrogenation of oxygen

The surface phase composition of alumocalcium cement-supported CuO and CuO-NiO catalysts prepared by chemical mixing has been studied using the method of thermo-vacuum curves of electric conductivity. The deactivation of these catalysts due to overheating to 800 °C under conditions of hydrogenation of oxygen is rationalized by the partial extraction of CuO (and NiO) from the stabilizing structure of the support solid solutions and by sintering of the extracted oxides and the reduced metallic phase. Complete regeneration of the CuO-NiO-talum catalysts can be achieved if a considerable amount (20%) of copper hydroxocarbonate is added.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1559–1562, September, 1994.     

Effect of Oxygen Redistribution on the Normal and Superconducting Properties of Yttrium High‐Temperature Superconductors

An anomaly is found in the vicinity of T_max 560$ K on electric resistance versus temperature curves for yttrium hightemperature superconductors of the 123 phase. Xray phase analysis suggests a structural phase transition in the vicinity of T_max due to oxygen redistribution in the mobile sublattice of this compound. Investigation of samples with Y partially replaced by Ca has shown that the structural phase transition does not depend on carrier concentration in the conduction band.