Graded PZT ceramics for piezoelectric transformers

In the present study two types of the synthesized Pb(Zr_1−xTi_x)O₃ (PZT) powders differing in Zr/Ti ratio were used to prepare the spatially inhomogeneous (i.e., graded) structure. A position-dependent chemical composition was expected to cause the property gradient. Disk-shaped compacts were prepared in a way such that two different orientations of the radial gradients were formed. The solid state sintering under pressure was utilized to prepare ceramics. Simultaneous thermal analysis was used to study thermal behavior of the ceramic powders. Graded PZT ceramics were characterized using X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. It was also characterized in terms of its dielectric properties by both bridge technique and the impedance spectroscopy. On the basis of graded PZT ceramics the disk-shaped radial mode piezoelectric transformer was developed and fabricated.     

低于300℃时两种氧化铈材料对稀燃阶段NOx存储性能的影响

研究了低于300 ℃时两种氧化铈对稀燃阶段NO_x存储性能的影响,催化剂由2%（w）Pt/Al₂O₃（PA）与CeO₂-X（X=S,I）机械混合制备. X射线衍射（XRD）,BET表面积和扫描电子显微镜（SEM）用于表征材料的物理结构. X射线光电子能谱（XPS）和H₂程序升温还原（H₂-TPR）用于表面Ce³⁺和活性氧定量. 原位漫反射傅里叶变换红外光谱（in-situ DRIFTS）用于分析表面NO_x吸附物种. 相比于CeO₂-I,CeO₂-S 具有优良的物理化学性能,包括高比表面积、丰富的空隙结构、较高的抗老化能力及表面Ce³⁺浓度. 因而,Pt/Al₂O₃+CeO₂-S 表现出优异的NO_x存储能力. 此外,PA+CeO₂-X（X=S,I）上存在Pt 与CeO₂之间的相互作用,可提高表面氧物种的活性进而促进NO氧化及NO_x存储. PA+CeO₂-S上的这种相互作用要强于PA+CeO₂-I. 研究表明,表面Ce³⁺浓度和活性氧含量对NO_x存储起到重要作用. 然而经过水热处理后,Pt 与老化的氧化铈（ACS,ACI）之间的相互作用降低,并且两种氧化铈NO_x存储性能显著下降. 另外,与PA+ACS（ACI）相比,PA+PACS（PACI）样品NO_x存储能力得到改善,这归因于表面氧物种活性增加能促进硝酸盐的形成.     

Certification of reference materials and accreditation of reference material producers: Questionable terminology leads to confusion

In the view of the Deutscher Kalibrierdienst (DKD) , a certifying body for reference materials can be considered to be a calibration laboratory. Therefore, accreditation of calibration laboratories in accordance with ISO/IEC 17025 is the most appropriate way to establish confidence in certificates for reference materials. If necessary, the criteria of ISO/IEC 17025 can be tailored to specific cases. There is no need to provide any new kind of reference-material specific accreditation. However, in view of the variety of reference materials and the practice existing in other countries, accreditation of testing laboratories and product certification bodies may optionally be acceptable as long as the same stringent principles with respect to traceability and measurement uncertainty are applied. Such accreditations but not accreditations of reference material producers (ISO Guide 34) are also covered by existing international mutual recognition arrangements (MRA).     

Mechanism and potential applications of bio-ligninolytic systems in a CELSS

A large amount of inedible plant material, generated as a result of plant growth in a Controlled Ecological Life Support System (CELSS), should be pretreated and converted into forms that can be recycled on earth as well as in space. The main portion of the inedible biomass is lignocellulosic material. Enzymatic hydrolysis of this cellulose would provide sugars for many other uses by recycling carbon, hydrogen, oxygen, and nitrogen through formation of carbon dioxide, heat, and sugars, which are potential foodstuffs. To obtain monosaccharides from cellulose, the protective effect of lignin should be removed. White-rot fungi degrade lignin more extensively and rapidly than other microorganisms.Pleurotus ostreatus degrades lignin effectively, and produces edible and flavorful mushrooms that increase the quality and nutritional value of the diet. This mushroom is also capable of metabolizing hemicellulose, thereby providing a food use of this pentose containing polysaccharide. This study presents the current knowledge of physiology and biochemistry of primary and secondary metabolisms of basidiomycetes, and degradation mechanism of lignin. A better understanding of the ligninolytic activity of white-rot fungi will impact the CELSS Program by providing insights on how edible fungi might be used to recycle the inedible portions of the crops.     

TiO2/Eu-MCM纳米超分子材料的组装和光催化性能

利用有机相-水相界面共沉淀溶胶支持自组装方法制备粒径为15 nm、孔径为8 nm的分子筛Eu-MCM, 它拥有734 m²/g的比表面积和1.49 cm³/g的比孔容. 把TiO₂组装到Eu-MCM的孔道中, 组装成TiO₂/Eu-MCM纳米复合材料. XRD, RAMAN和选区电子衍射花样分析表明纳米复合材料中的TiO₂为锐钛型. TiO₂/Eu-MCM的发光表现为Eu^3＋离子的特征光谱, 激发峰分别为342 (⁵L₁₀), 358 (⁵L₉), 378 (⁵L₇), 390 (⁵L₆), 411 (⁵D₃), 462 (⁵D₂)和524 (⁵D₁) nm; 发射峰为579, 592, 613, 653和701 nm, 归属于⁵D₀→⁷F_J (J＝0, 1, 2, 3, 4)组态间的跃迁. 纳米复合材料的发光强度都要比Eu-MCM的发光强, 其中43%TiO₂/Eu-MCM的发光最强. 荧光和紫外漫反射结果表明客体TiO₂对主体分子筛存在能量传递效应. 在微弱的紫外灯光照射下, TiO₂/Eu-MCM纳米复合材料对苯酚的光催化氧化性能和其发光强度具有一定的相关性. 29%TiO₂/Eu-MCM的纳米复合材料拥有的比表面积、孔容和孔径分别为204 m²/g, 0.24 cm³/g和4.7 nm. 29%TiO₂/Eu- MCM对苯酚具有68%的最高光催化氧化产率和85%催化氧化选择性.     

Nb 掺杂LiFePO4/C 的一步固相合成及电化学性能

用固相法一步合成了Nb掺杂的LiFePO4/C复合材料, 研究了Nb掺杂量对材料电化学性能的影响. 结果表明, Nb掺杂后LiFePO4/C复合材料的电化学性能明显提高. 在0.5C、1C和2C充放电倍率下, 名义成分为Li0.96Nb0.008FePO4/C正极材料的比容量分别为161、148和132 mAh•g−1, 已达到实用化水平. 阻抗谱和循环伏安特性测试显示, Nb掺杂有效地降低了复合材料电极的阻抗和极化, 说明Nb掺杂的主要作用是提高了LiFePO4的电子电导率.     

Measurement uncertainty and the use of reference materials

The use of (certified) reference materials and quality control materials can form a suitable basis for evaluating measurement uncertainty of routine measurements. In particular when these materials are used for quality control purposes, it is not always evident how the quality control data can be used in the uncertainty budget of a routine measurement. Current guidance documents on the evaluation of measurement uncertainty and the use of reference materials treat this subject only in part, or in very generic terms. ISO/REMCO has established a new working group that will provide practical guidance and examples on how to use quality control data in the evaluation of measurement uncertainty. A short introduction to the subject is given.

Mg／Mgl．8La0．2Ni纳米复合材料的吸放氢性能研究

应用高能球磨法制备Mg-x％Mg1.8La0.2Ni（x=10、20和30）纳米复合储氢材料．X射线衍射（XRD）、透射电镜（TEM）和选区电子衍射（SAED）测试表明，该复合材料具有纳米晶和非晶态混合结构的性质，吸氢温度降低，较好的吸放氢动力学性能，在423K，2．5MPa氢压的条件下，50s内即可达到最大吸氢量．     

Crystal structure of the parent misfit-layered cobalt oxide [Sr2O2]qCoO2

The crystal structure of our newly discovered Sr-Co-O phase is investigated in detail through high-resolution electron microscopy (HREM) techniques. Electron diffraction (ED) measurement together with energy dispersive X-ray spectroscopy (EDS) analysis show that an ampoule-synthesized sample contains an unknown Sr-Co-O ternary phase with monoclinic symmetry and the cation ratio of Sr/Co=1. From HREM images a layered structure with a regular stacking of a CdI₂-type CoO₂ sheet and a rock-salt-type Sr₂O₂ double-layered block is observed, which confirms that the phase is the parent of the more complex “misfit-layered (ML)” cobalt oxides of [M_mA₂O_m+2]_qCoO₂ with the formula of [Sr₂O₂]_qCoO₂, i.e. m=0. It is revealed that the misfit parameter q is 0.5, i.e. the two sublattices of the CoO₂ sheet and the Sr₂O₂ block coexist to form a commensurate composite structure. We propose a structural model with monoclinic P2₁/m symmetry, which is supported by simulations of ED patterns and HREM images based on dynamical diffraction theory.