INVESTIGATION OF A QUASI-STEADY LIQUID CRYSTAL TECHNIQUE FOR FILM COOLING HEAT TRANSFER MEASUREMENTS

A quasi-steady technique to simultaneously measure the local heat transfer coefficient and cooling effectiveness on surfaces involving film cooling situations is investigated. The method employs a composite slab consisting of a very thin laminate layer of low-thermal-conductivity material superposed upon a highly conductive metal substrate. The resulting heat transfer in the thin laminate is described by one-dimensional conduction. A very thin coating of thermochromic liquid crystals sprayed onto the surface of the laminate is used in conjunction with a computer image processing procedure to provide local surface temperature data. This information, combined with the substrate and mainstream gas temperatures, provides highly detailed (90 video pixels/cm²) local convection heat transfer distributions. The method is used to conduct flat-plate film cooling experiments consisting of a single row of discrete holes inclined at 35 to the mainstream flow. The local surface temperature is influenced by the combination of two interacting fluid streams at different temperatures. A numerical analysis was performed to assess the assumptions underlying the data reduction procedure. The experimental uncertainty of 7% in the heat transfer coefficient is comparable to prior studies. Furthermore, the uncertainty of 5% in the film cooling effectiveness, coupled with the negligible lateral conduction errors, indicates the present technique offers a unique capability for accurate measurement of the local film cooling effectiveness.     

White and some colored marbles as alternative radiation shielding materials for applications

ABSTRACT

In this paper, the radiation shielding parameters such as linear attenuation coefficients (LAC, µ), mass attenuation coefficients (MAC, µ/ρ), effective atomic numbers (Z_eff), effective electron densities (N_eff), half value of layers (HVL), mean free paths (MFP) and buildup factors (exposure (EBF) and energy absorption (EABF)) were investigated for cream (M1), pink (M2), white (M3), maroon (M4) and green (M5) marbles. Attenuation coefficients were measured in the energy region 31.18–661.66 keV photon energies. The values of Z_eff and N_eff were then calculated using these coefficients with logarithmic interpolation method, and HVLs and MFPs were calculated using the values of LAC of marble samples at the same photon energies. The experimental results were compared with the theoretical values obtained from WinXCom program, and good agreements were observed between the experimental and theoretical results. HVLs and MFPs of all marble samples were compared with those of some concretes, glasses and commercial radiation shielding glasses (SCHOTT Co.). The studied marbles were better radiation shielding materials than standard shielding concretes due to lower HVL and MFP values lower than the ordinary concrete. Finally, EBFs and EABFs of the marbles were calculated in the energy region 0.015–1?MeV up to penetration depths of 40 mfps by Geometric Progression method (G-P), and the results were discussed in terms of photon energies and chemical compositions of the marbles.     

Investigating the Dynamic Viscoelasticity of Single Polymer Chains using Atomic Force Microscopy

In single‐molecule force spectroscopy (SMFS), many studies have focused on the elasticity and conformation of polymer chains, but little attention has been devoted to the dynamic properties of single polymer chains. In this study, we measured the energy dissipation and elastic properties of single polystyrene (PS) chains in toluene, methanol, and N,N‐dimethylformamide using a homemade piezo‐control and data acquisition system externally coupled to a commercial atomic force microscope (AFM), which provided more accurate information regarding the dynamic properties of the PS chains. We quantitatively measured the chain length‐dependent changes in the stiffness and viscosity of a single chain using a phenomenological model consistent with the theory of viscoelasticity for polymer chains in dilute solution. The effective viscosity of a polymer chain can be determined using the Kirkwood model, which is independent of the intrinsic viscosity of the solvent and dependent on the interaction between the polymer and solvent. The results indicated that the viscosity of a single PS chain is dominated by the interaction between the polymer and solvent. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1736–1743     

How computational methods and relativistic effects influence the study of chemical reactions involving Ru‐NO complexes?

Two treatments of relativistic effects, namely effective core potentials (ECP) and all‐electron scalar relativistic effects (DKH2), are used to obtain geometries and chemical reaction energies for a series of ruthenium complexes in B3LYP/def2‐TZVP calculations. Specifically, the reaction energies of reduction ( A ‐ F ), isomerization ( G‐I ), and Cl⁻ negative trans influence in relation to NH₃ ( J ‐ L ) are considered. The ECP and DKH2 approaches provided geometric parameters close to experimental data and the same ordering for energy changes of reactions A ‐ L . From geometries optimized with ECP, the electronic energies are also determined by means of the same ECP and basis set combined with the computational methods: MP2, M06, BP86, and its derivatives, so as B2PLYP, LC‐wPBE, and CCSD(T) (reference method). For reactions A ‐ I , B2PLYP provides the best agreement with CCSD(T) results. Additionally, B3LYP gave the smallest error for the energies of reactions J ‐ L . © 2017 Wiley Periodicals, Inc.     

基于物理课堂有效教学的策略浅析

根据有效教学的理念提出了课堂有效教学的基本策略、动力策略和长效策略,并结合基础物理的教学,对这些教学策略的科学掌握和运用进行了探讨.     

Combining GPS carrier phase and Doppler observations for precise velocity determination

The truncation error and propagation error are analyzed for velocity determination through differential GPS carrier phase observations,and an approach for the choice of the best number of points for the central difference method is developed.In order to overcome the disadvantages of existing GPS velocity determination methods,a new velocity determination algorithm is presented,based on combining carrier phase and Doppler observations.The basic idea is that two types of observation are combined by adding the...     

210Pb in magnesium dietary supplements

The idea behind this study was to investigate the most popular magnesium dietary supplements as a potential additional source of ²¹⁰Pb in the human diet. The paper presents the results of ²¹⁰Pb activities determined in different magnesium supplements, as well as an estimation of the annual effective radiation doses from ²¹⁰Pb decay. The results showed that the highest value of ²¹⁰Pb activity was found in a magnesium supplement of natural origin (dolomite) with a value of 2.97?±?0.18 mBq g^–1. The highest annual radiation dose from ²¹⁰Pb obtained from the magnesium daily recommended value (0.4 g of pure Mg) was calculated for dolomite tablets as 3.71?±?0.02 µSv·year^–1.     

Real‐Time Measurement of the Size Distribution of Diesel Exhaust Particles using a Portable 4‐stage Electrical Low Pressure Impactor

For this study, a 4 stage electrical low pressure impactor was designed to measure the real‐time size distribution of diesel particulate matter (DPM). For the performance evaluation, sodium chloride (NaCl) particles and dioctyl sebacate (DOS) particles were used. After evaluating the collection efficiency of each stage of the impactor, the size distributions of test particles were estimated using electrical current data and their inversion algorithm, and this was found to agree with the results obtained by a scanning mobility particle sizer (SMPS). For measurement of DPM, a common‐rail direct injection (CRDI) diesel engine, for engine speeds of 1,200 rpm and 1,500 rpm at 2.7 kgf·m, was used. Therefore, it was found that the size distribution of the DPM could be easily obtained, with the currents measured by the impactor and the data inversion algorithm, in less than 5 seconds. Furthermore, the effective density of the DPM could be obtained using the calculated results and the SMPS data.     

重度原油注空气低温氧化过程研究(英文)

低温氧化反应对现场燃烧(ISC)技术点火的成功有十分重要的影响.采用高压氧化管,研究了不同温度压力下,新疆克拉玛依重度原油的低温氧化过程.结果表明,温度和压力的变化对低温氧化反应的放热程度、持续时间以及气体产物有明显影响.适合油样低温氧化反应的温度和压力分别为150℃和10MPa.此外,采用纯组分替代原油族组分进行低温氧化实验,研究低温氧化反应对原油族组分(饱和烃、芳香烃、胶质、沥青质)含量的影响.结果表明,原油所含族组分中,芳香烃组分最易被氧化,其含量由氧化前的19.17%减少到12.38%(150℃)和9.51%(250℃).随着低温氧化过程的进行,结构复杂的族组分(胶质、沥青质)的含量明显增加.实验数据对油藏实施注空气技术,以及该技术现场实施条件的确定有十分重要的指导意义.