Synthesis of Oxathiacrown Compounds by the Reactions of Sulfur Dichloride with Unsaturated Compounds and Their Extraction Characteristics. (Review)

Published data of the last 10-15 years on the use of the reactions of sulfur dichloride with various unsaturated compounds for the synthesis of oxathia- and thiacrown compounds and study of their extraction characteristics toward various transition and heavy metals are reviewed. Some previously unpublished results and associated experimental data are also included.     

Determination of Organochlorine Pesticides in Sediments from Authie Bay Using Microwave Assisted Solvent Extraction

The aim of this study was to develop an analytical method to determine the organochlorine concentrations in sediments. Combination of Microwave assisted Solvent Extraction (MASE) and capillary gas chromatography with specific detection (electron capture detector) was a viable approach for the determination of pesticides in solid matrixes. In this study, MASE development was focused on the selection of a suitable extraction solvent for all the target analytes. MASE procedure was validated by comparison with conventional methods such as Soxhlet and sonication extraction. The proposed method was then applied to determine the organochlorine insecticides concentrations in samples from Authie Bay (France). Environmental water samples were analysed and five target analytes were detected in concentrations from 0.03 to 0.56 ng/g of dry sediment. These investigations showed the accumulation and the persistency of these products in sediments in spite of the fact they were banned a few decades ago.     

Headspace single-drop microextration for the detection of organotin compounds

The performance of single-drop microextraction (SDME), coupled with gas chromatography/mass spectrometry, was assessed for the determination of tributyltin compounds in water and solid samples. Experimental parameters impacting the performance of SDME, such as microextraction solvent and sampling and stirring time, were investigated. Analytical results obtained by SDME were compared with those generated by conventional solid phase microextraction (SPME) and liquid-liquid extraction (LLE) for the determination of TBT in PACS-2 sediment certified reference material (CRM).     

P-507回流萃取法富集镥的研究——Ⅰ.P-507萃取分离镱镥混合稀土的性能

本文研究了2-乙基己基膦酸单2-乙基己基酯(P-507)在盐酸和硝酸体系中萃取镱镥混合稀土的性能。说明P-507在硝酸体系中的萃取分离系数较其在盐酸体系中高,而在盐酸体系中有更高的反萃效率。与二(2-乙基己基)磷酸(P-204)相比,P-507具有萃取酸度低、易反萃和不易乳化的优点。我们还确定了回流萃取法分离镥镱的基本参数,表明P-507是一种新型的分离重稀土的良好萃取剂。     

固相萃取-气相色谱-质谱分析肉样中盐酸克伦特罗的残留量

建立了固相萃取 气相色谱 质谱联机分析肉样中盐酸克伦特罗残留量的方法。对盐酸克伦特罗在C1 8和离子交换固相萃取柱上的保留行为进行了研究 ,发现不同浓度盐酸克伦特罗的固相萃取回收率在 75 %～ 95 %之间 ;肉样中的加标回收率在 70 %～ 83 % ;相对标准偏差在 4 .95 %～ 1 3 .4 % ;最低检出限为 1 μg kg。盐酸克伦特罗的硅烷化产物 ,采用选择离子的模式进行检测 ( 86、2 4 3、2 62、2 77) ,衍生物的峰面积与样品浓度在0 .0 0 2 5 2～ 2 .0 2mg L范围内呈良好的线性关系 ,线性回归系数大于 0 .9999。     

毛细管电泳-电感耦合等离子体原子发射光谱法对田七提取液中Fe、Cu和Mg存在状态的研究

提出了以水作溶剂微波萃取提取,并以毛细管电泳电感耦合等离子体原子发射光谱(CE-ICP-AES)法测定田七提取液中Mg、Cu和Fe的形态的分析方法。实验结果表明:Mg仅以游离态存在;而Cu和Fe除了游离态以外,还存在其它三种未知的形态。此外,还测定了田七中20个微量元素的总含量,并得到了上述待测元素在水提取液中的提取率。     

Multifunctional Calix[4]arenes Containing Pendant Amide and Phosphoryl Groups: Their Use as Extracting Agents and Carriers for Alkali Cations

The complexing, extracting and mobile carrier properties of the tetra(phosphine oxide)-calix[4]arene 1 and the hybrid diamide-di(phosphine oxide)-calix[4]arene 2 were studied. Both ligands give 1 : 1 complexes with alkali cations in THF as shown by the picrate method. 1H NMR experiments were run to follow encapsulation of sodium and potassium cations. The corresponding spectra indicate C2-symmetrical structure. The observed extraction orders of the alkali picrates were as follows K+>Rb+>Li+>Cs+>Na+ for 1 and Li+>Na+>K+>Rb++ for 2. Transport kinetics was analysed by means of a model which assumes pure diffusion and which allows the evaluation of mass transfer coefficients in all systems. These coefficients and their influences on the transport rate are discussed in terms of size of the transporting species in the liquid membrane.     

Alginate Properties and Heavy Metal Biosorption by Marine Algae

The physical properties of the alginate component in four different brown seaweeds (Sargassumfluitans, Ascophyllum nodosum, Fucus vesiculo-sus, andLaminaria japonica) were characterized using potentiometric titration,¹³C-nuclear magnetic resonance (NMR), chemical analysis, and viscosity measurements. The heavy metal binding capacities of the corresponding seaweeds were directly proportional to their respective total carboxyl group content, and related to the electronegativity of the elements investigated (Ca, Zn, Cd, Cu, and Pb). The uronic acid composition or sequence of the alginate component did not affect the metal uptake properties of the biosorbents studied here. However, the alginate leaching owing to its solubilization by Na ions was observed to decrease with increasing intrinsic viscosity of the extracted alginate, related to its molecular weight, and with increasing apparent acidic dissociation constant, related to the alginate density inside the biomass.