Simple and versatile operational fractionation of Fe and Zn in dietary products by solid phase extraction on ion exchange resins

A simple and versatile protocol, based on use of solid phase extraction on strong ion exchangers and off-line detection by flame atomic absorption spectrometry, was devised to fractionate iron and zinc in common dietary food and beverages products, i.e., bee honeys, fruit juices and tea infusions. In the procedure proposed, cation exchanger Dowex 50Wx4 and anion exchanger Dowex 1x4 were used separately for distinguishing broadly meant the cationic metal fraction and the fraction of stable anionic metal complexes, respectively, after retention of metal species and their exhaustive elution by means of a 4.0 mol l⁻¹ HCl solution. The third fraction, referred to the residual metal species, was retrieved by difference between total soluble metal contents and sum of metal quantities in separated cationic and anionic fractions. The fractionation pattern observed for both metals was described and discussed.     

Determination of Low Contents of Fenpiverine Bromide by Extraction Spectrophotometry

An ion-pair extraction spectrophotometry method was developed for the determination of fenpiverine bromide in tablets. To determine this substance it was necessary to find experimental conditions that would allow eliminating the influence of other components of the tablets. Attention was paid to the fact that a suitable pH of water phase was necessary to achieve high selectivity.Received December 11, 2002; accepted April 24, 2003 Published online July 28, 2003     

Solid-phase extraction of iron(III) with an ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique

A new Fe(III)-imprinted amino-functionalized silica gel sorbent was prepared by a surface imprinting technique for selective solid-phase extraction (SPE) of Fe(III) prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Compared with non-imprinted polymer particles, the ion-imprinted polymers (IIPs) had higher selectivity and adsorption capacity for Fe(III). The maximum static adsorption capacity of the ion-imprinted and non-imprinted sorbent for Fe(III) was 25.21 and 5.10 mg g⁻¹, respectively. The largest selectivity coefficient of the Fe(III)-imprinted sorbent for Fe(III) in the presence of Cr(III) was over 450. The relatively selective factor (α_r) values of Fe(III)/Cr(III) were 49.9 and 42.4, which were greater than 1. The distribution ratio (D) values of Fe(III)-imprinted polymers for Fe(III) were greatly larger than that for Cr(III). The detection limit (3σ) was 0.34 μg L⁻¹. The relative standard deviation of the method was 1.50% for eight replicate determinations. The method was validated by analyzing two certified reference materials (GBW 08301 and GBW 08303), the results obtained is in good agreement with standard values. The developed method was also successfully applied to the determination of trace iron in plants and water samples with satisfactory results.     

Rapid determination of panaxynol in a traditional Chinese medicine of Saposhnikovia divaricata by pressurized hot water extraction followed by liquid-phase microextraction and gas chromatography-mass spectrometry

Panaxynol is a bioactive component in traditional Chinese medicines (TCMs), such as Saposhnikovia divaricata and Panax ginseng. In the work, two solvent-free sample techniques of pressurized hot water extraction (PHWE) and headspace liquid-phase microextraction (HS-LPME) were combined and developed for the determination of panaxynol in a TCM of S. divaricata. Panaxynol in the TCM samples from different growing areas was extracted by PHWE in dynamic mode, followed by extraction and concentration with HS-LPME and analysis with gas chromatography-mass spectrometry (GC-MS). The PHWE and HS-LPME parameters were optimized and the method validations were studied. Panaxynol in S. divaricata from four different growing areas was quantitatively analyzed by internal standard method. These results have shown that PHWE-LPME-GC-MS is a simple, rapid, efficient and low-cost method for the determination of panaxynol in TCMs and is a potential tool for TCM quality assessment.     

Determination of terazosin by cloud point extraction-fluorimetric combined methodology

A new sensitive and selective preconcentration-fluorimetric method for determination of terazosin based on its native fluorescence was developed. The analyte, initially present in aqueous matrix, was treated with an extractive non-ionic surfactant solution and separated by the clouding phenomenon. The optimum analytical conditions for terazosin assay were established. Under these conditions, linear calibration curves were obtained over the range of 1 × 10⁻⁵ to 7.0 μg mL⁻¹ with detection and quantification limits of 1.11 × 10⁻⁵ and 3.7 × 10⁻⁵ μg mL⁻¹, respectively. Additionally, the binding constant (K_B) for the terazosin-PONPE 7.5 system was determined given a value of 1028 L mol⁻¹. The developed coupled methodology, which thoroughly satisfies the typical requirements for pharmaceutical control processes, was proved to be appropriate for monitoring terazosin in actual pharmaceutical formulations and biological fluid sample. The results were validated by recovery test and by comparison with other reported methods, being highly satisfactory.     

Cesium lead halide perovskite nanocrystals for ultraviolet and blue light blocking

Using cesium lead halide perovskite nanocrystals, CsPb(Cl/Br)_3, as a light absorber, we report a highly effective UV and blue light blocking film. The CsPb(Cl/Br)_3 nanocrystals are well dispersed in the ethyl cellulose(EC) matrix to compose a UV and blue light shielding film, and the absorption edge of the film is tunable by adjusting Cl to Br ratio using anion exchange. The CsPbCl_2 Br-EC film exhibits a transmittance of 5% at 459 nm, 90% at 478 nm and 95% in the range of 500–800 nm, which makes it excellent for UV and blue light shielding. In addition, the as-prepared EC-CsPb(Cl/Br)_3 film shows excellent photostability under UV irradiation. Results demonstrate that this EC-CsPb(Cl/Br)_3 based materials with sharp absorbance edges, tunable blocking wavelength, and high photostability can be useful for the applications in UV and blue light blocking and optical filters     

Efficiency of tributyltin extraction from rhine river sediment

A Rhine river sediment sample was spiked with tributyltin (TBT), equilibrated for ten days and the tributyltin extraction efficiency was optimised using a simplex algorithm. Analysis was effected using hydride generation gas chromatography-atomic absorption spectroscopy (GC-AAS) apparatus. The results show that, in this sediment sample, different molarities of HCl in methanol extract different species with varying extraction efficiencies. The least polar extraction solution extracted TBT more efficiently, whilst DBT and MBT require molar solution of HCl in methanol for efficient extraction.     

Kinetic modelling of cadmium removal from phosphoric acid by non-dispersive solvent extraction

In this work it is reported that the kinetic modelling of the separation of cadmium from phosphoric acid by non-dispersive solvent extraction. Using Cyanex 302 as selective extractant, the extraction step was carried out in a hollow fibre module containing polypropylene fibres, whereas the concentration step required a ceramic module with tubular channels due to the high acidity of the backextraction agent. Application of the methodology previously reported by the authors led to the development of a kinetic model with three design parameters, i.e., equilibrium constant of the extraction reaction (K'_e = 6 × 10³ mol⁻²/l⁻²), membrane mass transport coefficient of the extraction module K_me=8.33×10⁻⁸ m/s) and of the backextraction module (K_ms=3.33×10⁻⁸ m/s), that described satisfactorily the behaviour of the separation-concentration system. Thus, in this work a new application of the non-dispersive solvent extraction technology is presented, characterising at the same time the behaviour and parameters of a new type of contactor, i.e., a tubular ceramic module.     

Solubility Measurements of Surfactants and Dissolution of Cytochrome c in 1,1,1,2‐Tetrafluoroethane Modified with Organic Solvents

The solubilities of four surfactants, sodium bis‐2‐ethylhexyl sulfosuccinate (AOT), cetyltrimethylammonium chloride, didodecyldimethylammonium bromide, and n‐dodecyltrimethylammonium chloride in liquid refrigerant 1,1,1,2‐tetrafluoroethane (R134a) modified with methanol, ethanol, and 2‐propanol were measured. The measurements were performed under 25 and 50 bar at 25 °C. The solubility of AOT was as high as 92 mM in R134a with addition of 2% ethanol. Cytochrome c molecules were then verified to be soluble in the AOT‐containing and ethanol‐modified R134a solution. Accordingly, liquid R134a is suggested as a potential extraction solvent for hydrophilic compounds.     

Determination of partition behavior of organic surrogates between paperboard packaging materials and air

The suitability of recycled paperboard packaging materials for direct food contact applications is a major area of investigation. Chemical contaminants (surrogates) partitioning between recycled paper packaging and foods may affect the safety and health of the consumer. The partition behavior of all possible organic compounds between cardboards and individual foodstuffs is difficult and too time consuming for being fully investigated. Therefore it may be more efficient to determine these partition coefficients indirectly through experimental determination of the partitioning behavior between cardboard samples and air. In this work, the behavior of organic pollutants present in a set of two paper and board samples intended to be in contact with foods was studied. Adsorption isotherms have been plotted and partition coefficients between paper and air have been calculated as a basis for the estimation of their migration potential into food. Values of partition coefficients (Kpaper/air) from 47 to 1207 were obtained at different temperatures. For the less volatile surrogates such as dibutyl phthalate and methyl stearate higher Kpaper/air values were obtained. The adsorption curves showed that the more volatile substances are partitioning mainly in air phase and increasing the temperature from 70 to 100 degrees C their concentrations in air (Cair) have almost doubled. The analysis of surrogates was performed with a method based on solvent extraction and gas chromatographic-flame ionization detection (GC-FID) quantification.