Roles of SiH4 and SiF4 in growth and structural changes of poly-Si films

The structural properties of polycrystalline silicon films, prepared by plasma enhanced chemical vapor deposition system, with different flow rates of SiH₄/SiF₄ mixtures at 300 °C were investigated. This study indicates that the low hydrogen coverage on the growing surface, under optimum fluorine radicals, will be leaded to an improvement of crystallized area as compared with case of high hydrogen coverage surface. Moreover, the studies of the role of SiH₄ and SiF₄ radicals show that the SiH₄ radicals are important in the nucleation and growth of grains. However, SiF₄ radicals are effective in the structural change of grain boundaries regions and by this way, in the present system, establish the growth of grains under the dominant 〈1 1 0〉 direction. The stress investigation indicates that addition of high flow rate of SiF₄ in amorphous film, results in the nearly stress free films. Finally, we found that the changes in g-value reflect the changes in the intrinsic compressive and tensile stress in the both polycrystalline and amorphous silicon films.     

Effect of the Parameters of Three-Mirror Resonators on the Spectral Characteristics of Single-Pulse Laser Generation with Self-Injection of Priming Radiation

Based on a semiclassical theory, investigations were made of the dynamics and spectral composition of pulsed generation with self-injection of priming radiation from the active part of a three-mirror linear resonator, the passive part of which contains an active loss modulator and serves as the output reflector of the laser. It is shown that there exists a range of resonator parameters at which pulsed lasing has virtually a single frequency irrespective of the detuning of the frequencies of the priming radiation and of the nearest eigenmode of the composite resonator. Considering graphically the phase conditions of generation, it is established that among pulsed lasers with self-injection of priming radiation which are constructed on the basis of three-mirror linear and branched resonators, the most efficient for creating single-frequency generation are those in which the length of the main resonator, where generation of the pulse occurs, is larger than the length of the additional one intended for forming the priming radiation. With an inverse ratio of the lengths of the resonators, the conditions of single-frequency pulsed generation becomes dependent on the priming radiation frequency.     

Necessary Conditions for Differentiability of Distance Functions

Necessary conditions for the Gâteaux differentiability of the distance function to a set are considered. A series of characterizing results is obtained.     

Q过程的不变分布(Ⅱ)

设E为一个可数集,Q=（qi,j;i,j∈E）为E×E上的矩阵,满足m为E上的概率分布满足何时存在Q过程,使得m是它的不变分布? 这个问题由Williams（1979）作为一个开问题提出.文[15]对全稳定情形,解决了这个问题;本文对单瞬时情形,完整地解决了该问题.     

Extrusion of pastes with a piston extruder for the determination of the local solid and fluid concentration, the local porosity and saturation and displacement profiles by means of NMR imaging

 Nuclear Magnetic Resonance (NMR) was used to investigate the extrusion behaviour of PTFE pastes in a ram extruder. By means of ¹H-NMR imaging (MRI) it is possible to determine the local proton density and therefore, the local fluid concentration. The ¹⁹F-MRI provides the local solid concentration. Thus the local saturation and the local porosity can be calculated with the information of the local fluid and solid concentration. Furthermore displacement profiles can be derived from NMR images by means of correlation techniques without any preparation or marking of the pastes. Received: 8 May 2000   Accepted: 1 May 2001     

Nonsensitiveness Regions for Threshold Ellipsoids

The problem is to determine nonsensitiveness regions for threshold ellipsoids within a regular mixed linear model.     

一类机器人系统的最优控制

本文通过把结构阻尼系数当作控制变量来讨论一类弹性机器人系统的最优控制问题 ,并利用Banach空间几何性质证明了最优控制元的存在唯一性     

平面分拆的矢量控制方法：列严格梯形平面分拆

作为移位平面分拆的自然拓广,本文引入了梯形平面分拆的概念.应用矢量控制技巧,建立了给定形状和行(列)分部约束的列严格梯形平面分拆集合之枚举函数的初等对称函数行列式表达式.其中之一的重要特例构成了关于循环对称平面分拆的Macdonald猜想的证明基础.     

Analytic calculation of scaling dimensions: Tricritical hard squares and critical hard hexagons

The finite-size corrections, central chargesc, and scaling dimensionsx of tricritical hard squares and critical hard hexagons are calculated analytically. This is achieved by solving the special functional equation or inversion identity satisfied by the commuting row transfer matrices of these lattice models at criticality. The results are expressed in terms of Rogers dilogarithms. For tricritical hard squares we obtainc=7/10,x=3/40, 1/5, 7/8, 6/5 and for hard hexagons we obtainc=4/5,x=2/15, 4/5, 17/15, 4/3, 9/5, in accord with the predictions of conformal and modular invariance.     

理想气体在热力学中的作用

指出热力学理论是普遍的,不依赖于理想气体.理想气体为热力学理论提供了一个简单的实例,为测量热力学温度提供了一种简单的温度计.