Unbounded Components in the Solution Sets of Strictly Quasiconcave Vector Maximization Problems

Let (P) denote the vector maximization problem

Measuring the Polarization Parameters of Rain by Inverse Scattering

The theory is presented for one method of determining the effective polarization parameters of the rain medium in the problem of polarization information processing of detecting target. The determination of the effective polarization parameters of the propagation medium is from the data of propagation measurements over a line-of-sight link. The polarization parameters the effective average value, the effective standard deviation and F the effective shape parameter of the propagation medium are obtained by means of the method of inverse scattering, showing a good agreement with the data from direct measurements.     

复合材料三角形网格加筋圆锥壳体位移型稳定性方程及其总体稳定性分析

本文采用Donnell型扁壳理论,首先利用最小势能原理和广义平均筋条刚度法推导出用位移分量表示的复合材料三角形网格加筋叠层圆锥壳体的稳定性方程,考虑了蒙皮最一般的拉弯与拉扭耦合关系和加筋筋条的偏心效应,并讨论了该方程的基本性质.根据外压实验观察结果,通过选取适当的位移分量表达式,并运用Galerkin法分析了在均布外压作用下复合材料三角形网格加筋叠层圆锥壳体总体稳定性,得到了临界载荷的解析表达式,并对某一类C/E复合材料三角形内网格加筋圆锥壳体的临界外压进行了计算,所得理论值与实验结果很好地吻合.最后,讨论了有关参数对临界载荷的影响.本文所建立的新方程和所得结果对于航空航天结构非常有用.     

A parametric successive underestimation method for convex multiplicative programming problems

This paper addresses itself to the algorithm for minimizing the product of two nonnegative convex functions over a convex set. It is shown that the global minimum of this nonconvex problem can be obtained by solving a sequence of convex programming problems. The basic idea of this algorithm is to embed the original problem into a problem in a higher dimensional space and to apply a branch-and-bound algorithm using an underestimating function. Computational results indicate that our algorithm is efficient when the objective function is the product of a linear and a quadratic functions and the constraints are linear. An extension of our algorithm for minimizing the sum of a convex function and a product of two convex functions is also discussed.     

逼近严格伪压缩映象不动点的Ishikawa迭代程序

Let(X,‖·‖ ) be a Banach space.Let K be a nonempty closed,convex subset of Xand T∶K→K.Assume that T is Lipschitzian,i.e.there exists L>0 such that‖ T(x) -T(y)‖≤ L‖ x -y‖for all x,y∈K.Withoutloss of generality,assume that L≥ 1 .Assume also that T is strictly pseudocontractive.According to[1 ] this may be statedas:there exists k∈ (0 ,1 ) such that‖ x -y‖≤‖ x -y + r[(I -T -k I) x -(I -T -k I) y]‖for all r>0 and all x,y∈ K.Throughout,let N denote the set of positive in…     

Parallel Implementation of Successive Convex Relaxation Methods for Quadratic Optimization Problems

As computing resources continue to improve, global solutions for larger size quadrically constrained optimization problems become more achievable. In this paper, we focus on larger size problems and get accurate bounds for optimal values of such problems with the successive use of SDP relaxations on a parallel computing system called Ninf (Network-based Information Library for high performance computing).     

基于琼斯矩阵的FIR晶体光滤波器设计方法

FIR晶体光滤波器由夹在两个偏振片之间的N个厚度相同的晶片构成,设计过程中需要根据要求的频率响应求出各个晶体波片的光轴方向和输出端偏振片的通光方向.提出了一种基于琼斯矩阵的反向递推设计方法.FIR晶体光滤波器的琼斯矩阵是各个晶片以及偏振片琼斯矩阵的乘积,利用这一关系可以建立简单的反向递推关系,并计算出与输出偏振分量对应的正交偏振分量,通过迭代运算确定所有元件的角度参数.实例设计的结果与使用其它方法得到的结果一致,设计过程简单.     

基于过模波导的高功率微波准相干功率合成器

研究了一种用于功率合成的GW级高功率微波功率合成器。该合成器工作在X波段,输入微波由2路工作频率不同的X波段的微波源产生。为了满足输出功率和功率容量的要求,用于功率合成的微波源工作段波导的过模因子为12.7,这给功率合成器的设计带来了一定的困难。着重讨论了如何利用过模波导设计X波段高功率合成器,研究了如何抑制过模波导的高次模式并提高其功率容量和传输效率。设计的功率合成器单路传输效率达到99.0%以上,允许的最大输出功率达到5.6 GW以上,还可以按照需求适当增大高度,以进一步提高其功率容量而不影响传输效率。     

基于机场货运预测的GM(1,1)建模过程问题分析

运用灰色系统GM(1,1)模型进行预测时,模拟精度和预测精度是关注的焦点.对原始数据构造缓冲算子和进行完整的前期检验,运用等维灰数递补的动态建模方法,针对误差建立残差修正模型,都可以提高预测的可信度.通过归纳建模各阶段可能出现的典型问题以及解决方法,以期对建立优化模型有所帮助.最后建立GM(1,1)模型预测天津滨海机场货邮吞吐量.