Gas-liquid chromatography of perfluorocarboxylic thioesters

Perfluorocarboxylic thioesters R_FC(O)SR (R_F=CF₃(CF₂)_j, R=CH₃(CH₂)_i, i andj=0–5) were studied for the first time by GLC on packed columns using SE-30, SKTFT-50X, and XE-60 as the stationary phase. The values of thermodynamics functions of sorption were calculated. The correlations between these functions and the molecular structures as well as the conditions of analysis were established. The insertion of the S atom into the molecules of derivatives of perfluorocarboxylic acids causes a decrease in the contribution of the orientation interaction and an increase in the dispersion interaction of thioesters with the stationary phases compared to esters and amides of perfluorocarboxylic acids studied previously. For Part 1, see Ref. 1. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1165–1168, June, 1997.     

Ionic nanocomposites based on XNBR-OMg filled with layered nanoclays

Ionic elastomers based on carboxylated nitrile rubber (XNBR) crosslinked with magnesium oxide (OMg) and filled with layered nanoclays have been prepared. Two types of nanofillers were employed: a commercial one (Cloisite 15 A) and the other prepared in our laboratory (BCA-ODA). The properties of raw and vulcanized compounds have been studied in order to elucidate the effect of layered nanoclays. X-ray diffraction analysis shows that during compounding and crosslinking the macromolecular chains of rubber were intercalated in a commercial nanofiller, whilst our nanoclay was exfoliated. However, this fact does not affect the properties of compounds homogeneously. Vulcanization parameters, Mooney viscosity and decay and rheological properties were affected depending on the filler type. Mechanical properties were not significantly varied, but glass transition temperature and ionic transition temperature were shifted in comparison with those of the unfilled compound.     

Isomer effects on transport properties of polyesters based on bisphenol-A

Pure gas sorption and transport properties of polyesters based on bisphenol-A and both pure isophthalic and pure terephthalic acid chloride were obtained for He, N₂, O₂, CH₄, and CO₂ at 35°C. The polymers were synthesized in our laboratory and amorphous films were prepared with a specialized solvent casting procedure. The polymer containing m-phenylene groups shows higher permselectivity for most of the gas pairs. The ideal selectivity of O₂/N₂ was increased by 33% when p-phenylene units were replaced by m-phenylene ones. On the other hand, the polyester containing only p-phenylene groups, shows higher permeability to all the gases studied. The polymer based on pure terephthalic acid chloride has a 75% higher oxygen permeability and a 1.1-fold higher carbon dioxide permeability than the isophthalic acid derivative. The polyester containing meta-phenylene units has lower T_g, higher permselectivity, lower permeability, lower fractional free volume (FFV), and lower d-spacing. The values of FFV, and lower d-spacing. The values of FFV and d-spacing were only slightly different between the two isomers. Moreover, for the sub-T_gγ transition the maximum in tan δ occured at essentially the same temperature (?55°C). The polymer with a higher concentration of p-phenylene units shows somewhat larger area under the γ-peak, indicating slightly more sub-T_g motion. The Distribution of FFV is considered to be the determining factor for the differences in transport properties observed. © 1993 John Wiley & Sons, Inc.     

重力输水管道优化设计方法研究

针对重力输水管道设计中存在的问题，文章以管道造价最小为目标，应用动态规划，提出了一种新的重力输水管道优化设计方法，对输水管的当量管径、流量分配、连接管设置与可靠性校核计算等问题作了探讨。该方法可用于沿线有节点流量流出的并联输水管道优化设计，能明显节省投资，有良好的实用性     

Influence of humic substances on sorption and methylation processes of inorganic- and organo-tin species

The influence of humic substances on sorption and methylation processes for inorganic- and organotin species is presented. Four sediment samples from different locations of the Rivers Elbe, Mulde and Spittelwasser, Germany, with different organotin and humic contents were selected to extract the humic and fulvic acids. The various fractions—the original sediment, the humic acid, the fulvic acid and the residual sediment—were analysed for their organotin content. The individual buyltin species show quite different distribution patterns. Monobutyltin is found mostly associated with humic acids. Dibutyltin shows a nonunique behaviour. At low total organotin content, dibutyltin is found bonded to humic and fulvic acids, whereas at high organotin content dibutyltin is distributed more with the residual sediment. Most of the tributyltin remains in the sediment unextracted; only small quantities of it are in the fulvic acid fraction. Tetrabutyltin is only in the humic acid fraction when it binds to humic matter; it mostly remains in the sediment. General observations indicate that ionic butyltin species bind to fulvic acids whereas the non-polar tetrabutyltin is not found in the fulvic acid fractions in any of the samples. The appearance of monomethyl- and dimethyl-tin species in the humic and fulvic acid fractions after the alkaline extraction was surprising. There is a correlation between the humic content of the sample and the formation of methyltin species. Evidence is provided by experiments that humic substances act as methylation agents.     

基于专家动态权重的群组AHP交互式决策方法

为了能在群组决策中得到更为客观和准确的决策结果,在把专家权重划分为静态权重和动态权重的基础上,研究了在交互式决策中专家动态权重的确定方法,给出了共识度的一个定义.在此基础上,研究了群组AHP交互式决策方法中的一致性和相容性检验,给出了基于专家动态权重的群组AHP交互式决策方法流程,最后用一个示例说明了该方法的应用步骤.     

Guaranteed-accuracy approximation of reachable sets for a linear dynamic system subject to impulse actions

A method is proposed for approximating the reachable set of a dynamic system with a state space dimension no higher than six-eight considered on a finite time interval. The system is governed by linear differential equations with piecewise constant coefficients and impulse actions specified at prescribed times. The method is based on guaranteed-accuracy polyhedral approximations of reachable sets at researcher-specified times. Every approximation is constructed using the preceding one. A procedure is described for choosing parameters of the method that ensure the required accuracy with close-to-minimal time costs.     

航线优化的随机动态规划模型

航空公司在给定的运力和机队配置条件下,如何适应航线需求的不断变化而合理地分配运力,使航空公司的经营效益最大化是我国航空经营管理的一个重大课题.根据航班效益分析,在一定的经营时间,航行班次的条件下,建立一个航线贡献最大化的含有随机变量的动态规划模型.求解方法是先用M ON TE C ARLO方法计算机仿真把模型转化为非线性的整数规划.再用动态规划中资源分配算法求出模型的最优解,编排最优各航线规划.     

Mesoporous nanotube aggregates obtained from hydrothermally treating TiO2 with NaOH

Nanotube aggregates with high porosity were prepared from hydrothermal treatment of TiO₂ particles in NaOH at 130 °C, followed by HCl rinsing to different pH values. Pore structure of the aggregates, which were mainly mesoporous, was characterized by analyzing the N₂ sorption isotherm with different methods including the t-plot and density function theory. The surface area, pore volume and mean pore size of the aggregates increased with the rinsing acidity to reach a maximum (e.g. 400 m²/g in surface area) at pH 1.6 and then decreased with further increase of the acidity. The crystalline phase and composition of the aggregates were, as well, significantly affected by the acidity of the post-treatment rinsing. Large-surface area aggregates were of loosely-attached nanotubes, composed of both anatase TiO₂ and H₂Ti₂O₅·H₂O, obtained under a mildly acidic rinsing condition, while basic or highly acidic conditions resulted in the formation of closely coagulated dense structures consisting of different crystalline phases.     

Basic study of the gelation of dimethacrylate‐type crosslinking agents

An investigation was made of the gelation of dimethacrylate‐type crosslinking agents in view of an application for separation media. The study mainly centered on a crosslinking agent, glycerol dimethacrylate (GDMA), which is relatively hydrophilic because of a hydroxyl group in the middle of its structure. The gelation of GDMA was compared with that of other hydrophobic crosslinking agents such as ethylene glycol dimethacrylate and 1,6‐hexanediol dimethacrylate. The diluents used in the study were toluene, toluene with methanol, and cyclohexanol. The gelation was observed in real time with a charge coupled device camera and dynamic light scattering (DLS). Also, the separated dry gels were extensively characterized with scanning electron microscopy, BET (N₂ absorption and desorption isotherm), and Fourier transform infrared. DLS analysis showed a stronger molecular interaction of GDMA gelation in toluene, whereas this interaction was much weaker in an alcoholic solvent such as toluene with methanol or cyclohexanol. This indicated that GDMA gelation might proceed through hydrogen bonding as well as a crosslinking reaction of vinyl groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 949–958, 2006