Propagation of light inside shear flows: a remote sensing method to retrieve velocity fields

Inside a moving dielectric medium a wave perceives the matter as an effective gravitational field. The medium and its velocity field alter the way in which an electromagnetism field propagates. We propose an optical method for remote sensing of the velocity fields inside shear flows by angular scanning.     

固体材料脆性断裂的多尺度时空模型(英文)

通过实例分析了动态断裂过程所固有的典型动态作用,基于断裂孵化时间理论的时空结构方法提出了固体材料断裂的统一解释.此外,还提出了计及尺度效应的广义断裂模型,该模型可以用于预测准脆性非均质材料的多尺度断裂,并证明此模型基于实验室尺度的实验数据可以预测更高尺度(真实尺度)的宏观断裂.     

岩体动力变形破坏的层次特性(英文)

岩体具有复杂的内部结构,内部结构对于岩土的力学性质具有决定性的影响.文章从岩体结构层次的角度研究了岩体的动力变形与破坏过程,在松弛模型的框架内研究了变形破坏的空间尺度与应变率之间的关系.讨论了裂纹传播速度与荷载强度之间的关系,研究了岩体变形破坏的层次特性.最后从岩体结构层次角度研究了岩体的破坏准则.研究表明:岩体的动力变形与破坏具有层次特性,这一层次特性依赖于外载的空间与时间特性、岩体的结构层次和岩体变形与破坏过程速度的有限性.时间准则与极限变形准则可以较好地描述岩体的动力破坏.     

角分辨光电子能谱光束线1200line/mm光栅研制

国家同步辐射实验室新建了覆盖5～40 eV的低能区高分辨率角分辨光电子能谱光束线.其球面光栅单色仪包含了三块光栅,即300,600和1200 line/mm球面层式(Laminar)光栅.采用全息离子束刻蚀工艺,在硅光栅基片上成功地刻蚀出1200 line/mm、占空比0.35、槽深35 nm、有效刻划面积大于120 ...     

基于MATLAB软件对不同偏振光在不同介质中的传播过程的动态模拟

利用MATLAB软件对不同偏振光在真空、各向同性介质、线型各向异性介质以及圆型各向异性介质中的传播过程进行了三维动态模拟,能够加深学生对光的偏振概念以及各种偏振光与不同介质之间相互作用原理的理解。     

Study on the Reduced Traffic Congestion Method Based on Dynamic Guidance Information

This paper studies how to generate the reasonable information of travelers' decision in real network. This problem is very complex because the travelers' decision is constrained by different human behavior. The network conditions can be predicted by using the advanced dynamic OD(Origin-Destination, OD) estimation techniques. Based on the improved mesoscopic traffic model, the predictable dynamic traffic guidance information can be obtained accurately.A consistency algorithm is designed to investigate the travelers' decision by simulating the dynamic response to guidance information. The simulation results show that the proposed method can provide the best guidance information. Further,a case study is conducted to verify the theoretical results and to draw managerial insights into the potential of dynamic guidance strategy in improving traffic performance.     

The characterisation of atomic structure and glass-forming ability of the Zr–Cu–Co metallic glasses studied by molecular dynamics simulations

In the present work, the glass formation process and structural properties of Zr₅₀Cu_50-xCo_x (0 ≤ x ≤ 50) bulk metallic glasses were investigated by a molecular dynamics simulation with the many body tight-binding potentials. The evolution of structure and glass formation process with temperature were discussed using the coordination number, the radial distribution functions, the volume–temperature curve, icosahedral short-range order, glass transition temperature, Voronoi analysis, Honeycutt–Andersen pair analysis technique and the distribution of bond–angles. Results indicate that adding Co causes similar responses on the nature of the Zr₅₀Cu_50-xCo_x (0 ≤ x ≤ 50) alloys except for higher glass transition temperature and ideal icosahedral type ordered local atomic environment. Also, the differences of the atomic radii play the key role in influencing the atomic structure of these alloys. Both Cu and Co atoms play a significant role in deciding the chemical and topological short-range orders of the Zr₅₀Cu_50-xCo_x ternary liquids and amorphous alloys. The glass-forming ability of these alloys is supported by the experimental observations reported in the literature up to now.     

全数字全息术在图像信息隐藏中的应用

提出了全数字全息术在计算机图像信息隐藏中的应用。待隐藏的秘密信息以及公开的承载信息均为灰度级静止图像。首先对待隐藏的计算机信息图进行全息变换,即通过计算全息图的制作步骤制作出全息图的图像文件,然后再进行Arnold对称性变换。在此基础上,将秘密图像嵌入到承载图像的DCT域的中频系数中。全数字全息术的引入进一步增强了隐藏图像的透明性,通过控制制作全息图时的参数可起到加密的作用,相当于增加了一把秘密钥匙,具有较高的保密性和稳健性。     

基于图像融合的动态轮廓线跟踪新方法

红外与可见光传感器是目标跟踪识别系统中常用的两种传感器,对这两种传感器图像进行融合能有效提高系统跟踪检测的准确性。将动态轮廓线模型与图像融合结合,在特征搜索过程中利用特征点准确地完成了图像配准,同时使用了一种新的特征级融合方法,将两种图像中目标轮廓的B样条曲线控制点进行实时微分耦合。这种耦合将Curwen提出的微分耦合机制作了改进,利用图像配准把刚性硬模板改变为实时的变换模板并推导了融合后动态轮廓线的新的动力学方程。这种融合利用了红外图像目标轮廓信息约束可见光图像中动态轮廓线的收敛形状,有效地提高了可见光图像目标跟踪的准确性。对运动人手序列图像的对比跟踪实验表明,这种融合使得可见光图像中动态轮廓线平均跟踪误差减小了60．25％。     

混合工质变浓度空调系统动态特性的模拟

本文在分析混合工质变浓度空调系统的传热传质和参数间的相互耦合关系的基础上,以实际流体的质量、动量和能量守恒方程为基础,结合系统各部件的特点,分别建立了各部件的数学模型,并实现了对系统动态特性的模拟计算和分析。