Fast polarisation-insensitive optical shutter supported by backflow in dichroic dye-doped dual-frequency liquid crystal

This paper describes a novel implementation of a dual-frequency liquid crystal optical shutter of the guest–host type. The transmissive state of the filter is obtained by applying a low-frequency electric field that brings the dichroic dye in a homeotropic orientation. The light-absorbing state is realised by a twisted planar configuration for which the absorption is quasi-independent of the polarisation. Switching between the two states occurs in about 1 ms and the devices show no scattering for wavelengths inside or outside the absorption band of the dichroic dye. Simulations and experiments reveal how a twisted state is obtained through the backflow phenomenon.     

Effects on molecular orientation and phase transition of addition of carbon nanotubes into liquid crystalline matrix

For practical guest–host applications, it is important to choose dyes with a high ability of orientation in the liquid crystal (LC) matrix. In this experimental work, two different azo-structured dyes (disperse yellow 3 and 7) were separately doped to each of two different nematic LCs (E7 and ZLI-1132). Their solubilities, textures, phase transition temperatures and order parameters were determined. At the second stage, single-walled carbon nanotubes (SWCNTs) in a small amount were separately added to each of these solutions, and the experiments were repeated as similar to the previous ones. The solubilities of dyes in the LC E7 were lower than those of ZLI-1132. Moreover, the highest order parameter value was attained with yellow 7 dye in ZLI-1132 nematic host. Co-use of nanoparticles (CNTs) as dopant resulted in notable increases in order parameters. These dyes and CNTs did not significantly destabilise the mesomorphic phase of nematic hosts. An appreciable change in textures was not monitored with addition of dopant(s). In addition, it was observed that the narrowing on the temperature range of the LC did not take place with the addition of dopants to the crystal; on the contrary, an increase was recorded.     

Elementary Photoelectronic Processes at a Porphyrin Dye/Single‐Walled TiO2 Nanotube Hetero‐interface in Dye‐Sensitized Solar Cells: A First‐Principles Study

A unique one‐dimensional (1D) sandwich single‐walled TiO₂ nanotube (STNT) is proposed as a photoanode nanomaterial with perfect morphology and large specific surface area. We have thoroughly examined the elementary photoelectronic processes occurring at the porphyrin dye/STNT hetero‐interface in dye‐sensitized solar cells (DSSCs) by theoretical simulation. It is desirable to investigate the interfacial photoelectronic processes to elucidate the electron transfer and transport mechanism in 1D STNT‐based DSSCs. We have found that the photoexcitation and interfacial charge separation mechanism can be described as follows. A ground‐state electron of the dye molecule (localized around the electron donor) is first promoted to the excited state (distributed electron donor), and then undergoes ultrafast injection into the conduction band of the STNT, leaving a hole around the oxidized dye. Significantly, the injected electron in the conduction band is transported along the STNT by means of Ti 3d orbitals, offering a unidirectional electron pathway toward the electrode for massive collection without the observation of trap states. Our study not only provides theoretical guidelines for the modification of TiO₂ nanotubes as a photoanode material, but also opens a new perspective for the development of a novel class of TiO₂ nanotubes with high power‐generation efficiency.     

一例水溶液中识别铜离子的染料探针

通过罗丹明B与乙二胺反应生成的中间体合成了一例可以对铜离子进行比色检测的探针R-Cu.R-Cu可以实现对在HEPES(5 mmol/L;pH 7.4)溶液中Cu2+的比色可视化识别,加入Cu2+后,R-Cu的吸收明显增强,呈现出罗丹明B的紫红色.探针对Cu2+具有较高的选择性和灵敏性,对其他常见的金属离子具有较强的抗干扰能力.该探针可以在较宽的特别是近中性pH环境下有效检测Cu2+,最低检出限为2.70×10?7 mol/L.     

Anaerobic biological treatment of dye bearing water in anaerobic sequencing batch reactor: Performance and kinetics studies

Textile and dye industries are main sources of dye bearing effluent. In present studies the anaerobic biological degradation of Acid Red 3BN dye water (AR3BNDW) and mixed dye water (MDW) for reduction of color and COD were studied in sequential batch reactor (SBR). The sludge as sources of microorganism was arranged from maize processing bio methanation wastewater treatment plant, which was acclimatized for treatment of AR3BNDW and MDW. After the acclimatization, dyes degradation were studied in SBR At optimum operation condition of hydraulics retention time (HRT) = 2.5 d, and treatment time (t_R) = 16 h, AR3BNDW have gone maximum 87% color reduction of 500 mg/L dye, and 82.8% COD reduction of 380 mg/L COD. At same operating condition, 84.5% color reduction of 500 mg/L dye, and 79.42% COD reduction of 413 mg/L COD achieved for MDW. The second order Grau model was fitted well for COD and dye reductions. The kinetics parameter were evaluated for both the dye water.     

Adamantyl Side Chains as Anti-Aggregating Moieties in Dyes for Dye-Sensitized Solar Cells

Designing and evaluating novel dye concepts is crucial for the development of the field of dye-sensitized solar cells (DSSCs). In our recent report, the novel concept of tethering the anti-aggregation additive chenodeoxycholic acid (CDCA) to dyes for DSSC was introduced. Based on the performance improvements seen for this modification, the aim of this study is to see if a simplified anti-aggregation unit could achieve similar results. The following study reports the synthesis and photovoltaic characterization of two novel dyes decorated with the steric ethyladamantyl moiety on the π-spacer, and on the triarylamine donor. This modification is demonstrated to be successful in increasing the photovoltages in devices employing copper-based electrolytes compared to the non-modified reference dye. The best photovoltaic performance is achieved by a device prepared with the adamantyl decorated donor dye and CDCA, this device achieves a power conversion efficiency of 6.1 % (Short-circuit current=8.3 mA cm⁻², Open-circuit voltage=1054 mV, Fill factor=0.69). The improved photovoltaic performance seen for the adamantyl decorated donor demonstrate the potential of ethyladamantyl side chains as a tool to ensure surface protection of TiO₂.     

Removal of Anionic Dyes from Aqueous Solution with Layered Cationic Aluminum Oxyhydroxide

It is highly desired yet challenged to find an adsorbent with low cost and excellent performance in the removal of organic dyes from aqueous solution. Here we reported that a layered cationic aluminum oxyhydroxide material hydrothermally synthesized from the low-cost source materials of AlCl₃∙6H₂O, CaO and H₂O, known as JU-111, can meet such criterion in removing methyl orange(MO) and Congo red(CR). JU-111 shows fast adsorption kinetics[especially for CR(15 s)] and high adsorption capacity(MO:>1000 mg/g; CR:>2900 mg/g), surpassing most of the reported adsorbents. Comprehensive characterizations of the adsorption process of MO and CR revealed that both adsorptions were achieved via the anion exchange process. The characteristics of extremely low cost and excellent performance render JU-111 great potential in the practical applications in the removal of anionic dyes.     

Facile synthesis of ZnO and Co3O4 nanoparticles by thermal decomposition of novel Schiff base complexes: Studying biological and catalytic properties

In this paper, a novel Zn(II) and Co(II) Schiff base complexes were synthesized by template method via refluxing 2,3-Naphthalenedicarboxaldehyde, Metal(II) chloride (Metal = Zn or Co), and L-phenylalanine. ZnO and Co₃O₄ nanoparticles were synthesized by thermal decomposition of Zn(II) and Co(II) complexes, respectively. The products were characterized using different instruments such as CHN, Conductivity, FT-IR, XRD, HR-TEM, and UV–Vis spectrophotometer. The experimental results of elemental analysis for Zn(II) and Co(II) complexes, agree with the calculated results, indicating that the Zn(II) and Co(II) complexes have 1:1 ligand/metal ratios. The molar conductance of the Zn(II) and Co(II) complexes, is less than 5 Ω^?1cm^?1mol^?1, confirming the non-electrolytic nature of the synthesized complexes. The average crystallite diameter of the ZnO and Co₃O₄ samples is 39.64 and 30.38 nm, respectively. The optical energy gap of the ZnO and Co₃O₄ samples are 2.75 and 3.25 eV, respectively. Methylene blue dye was utilized to examine the photocatalytic properties of the synthesized nanoparticles using UV irradiations in the absence and presence of hydrogen peroxide. The % degradation of the methylene blue dye in the presence of hydrogen peroxide using ZnO and Co₃O₄ samples after 40 min is 94.55 and 98.98, respectively. Six pathogenic microbes were utilized to examine the antimicrobial properties of the synthesized Schiff base complexes and their nanoparticles: Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Streptococcus species, Aspergillus species, and Candida species. Zn(II) and Co(II) complexes display inhibition towards all the studied microbes. Besides, ZnO and Co₃O₄ nanoparticles exhibit less inhibition towards Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Streptococcus species. Moreover, ZnO and Co₃O₄ nanoparticles have no activity towards Aspergillus and Candida species.     

Facile synthesis and characterization of β-cobalt hydroxide/hydrohausmannite/ramsdellitee/spertiniite and tenorite/cobalt manganese oxide/manganese oxide as novel nanocomposites for efficient photocatalytic degradation of methylene blue dye

In this paper, our research team has synthesized new nanocomposites by simple precipitation/ignition method and using low-cost chemicals. Hence, β-cobalt hydroxide/hydrohausmannite/ramsdellitee/spertiniite and tenorite/cobalt manganese oxide/manganese oxide new nanocomposites were synthesized by precipitation of Mn(II)/Co(II)/Cu(II) solution using sodium hydroxide and ignition of precipitate at 700 °C for 3 hrs, respectively. The synthesized nanocomposites were characterized using different instruments such as energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), transmission electron microscope (TEM), nitrogen gas sorption analyzer, and UV–vis spectrophotometer. Energy dispersive X-ray analysis revealed that the nanocomposite formed as a result of precipitation consists of copper, cobalt, manganese, and oxygen where the weight percentages are equal to 31.73, 27.01, 17.26, and 24 %, respectively. Also, the nanocomposite formed as a result of ignition consists of copper, cobalt, manganese, and oxygen where the weight percentages are equal to 31.26, 23.87, 14.56, and 30.31 %, respectively. Transmission electron microscope revealed that the nanocomposites formed as a result of precipitation and ignition consist of polyhedral and spherical shapes with an average diameter of 34.50 and 28.56 nm, respectively. The synthesized nanocomposites were used as new photocatalysts for the efficient degradation of methylene blue dye. 0.05 g of the synthesized nanocomposites degrade 100 % of 50 mL of 15 mg/L of methylene blue dye solution within 25 min in the presence of H₂O₂ under UV light.