Surface properties of Reactive Yellow 2 immobilised pHEMA and HEMA/chitosan membranes: characterisation of their selectivity to different proteins

Poly(hydroxyethyl methacrylate), pHEMA, and a composite pHEMA/chitosan networks were synthesized in the membrane form via UV initiated photo-polymerisation in the presence of an initiator ,′-azoisobutyronitrile. Reactive Yellow 2 (RY-2) was covalently immobilised as a dye–ligand onto both membranes. The polarity and surface energy of the investigated membranes were determined by contact angle measurement. The incorporation of chitosan in the pHEMA networks produced more hydrophilic surface, as indicated by contact angle analysis. The binding characteristics of lysozyme, γ-globulins, human serum albumin (HSA) and bovine serum albumin (BSA) to pHEMA-RY-2 and pHEMA/chitosan-RY-2 affinity membranes have been investigated from aqueous solution and their dye–ligand free forms were used as control systems. When chitosan was incorporated in the pHEMA network as a cationic polymer led to higher adsorption capacity for the lysozyme. Selective adsorption behaviour was also observed in the case of pHEMA/chitosan-RY-2 membrane for the lysozyme. The non-specific adsorptions of the lysozyme on the pHEMA and pHEMA/chitosan membranes were about 1.9 and 7.2 mg/ml, respectively. These were negligible for all others investigated proteins. The lysozyme adsorption data was analysed using the first-order and the second-order models. The first-order equation in both affinity membrane systems is the most appropriate equation to predict the adsorption capacities of the adsorbents. The adsorption isotherms well fitted the combined Langmuir–Freundlich model. A theoretical analysis has been conducted to estimate the thermodynamic contributions (changes in enthalpy, entropy and Gibbs free energy) for the adsorption of lysozyme to both dye–ligand immobilised membranes. The adsorption capacities of both dye–ligand immobilised membranes increased with increasing the temperature while decreased with increasing the NaCl concentration. Both affinity membranes are stable when subjected to sanitization with sodium hydroxide after repeated separation–elution cycles.     

E,E-1,4-二[2′,2″-(苯并噁唑基乙烯基)]苯及其衍生物的合成和光性能研究

合成了E,E-1,4-二[2′,2″-(苯并(口恶)唑基乙烯基)]苯及衍生物共14种,测定了它们的熔点、红外光谱、核磁共振氢谱、紫外吸收光谱和荧光发射光谱、荧光量子产率及激光性能。     

The length of the polymethine chain and the spectral-luminescent properties of symmetrical cyanine dyes

The general characteristics that relate the length of the polymethine chain of symmetrical cyanine dyes to their spectral-luminescent properties depending on the electron-donor character of the heterocycles and the nature of the solvent are formulated. For various types of symmetrical cyanines, the Stokes shifts decrease with the elongation of the polymethine chain due to weakening of the vibronic interactions. The vinylene shifts of the band maxima are essentially constant and fall within the range 100 to 130 nm depending on the nature of the heterocycles and the solvent. When the polymethine chain elongates the fluorescence quantum yields first increase and then decrease. The greater the effective length of the heterocycle the stronger the decrease. The fluorescence decay occurring when the polymethine chain gets longer is associated with intensification of the internal conversion. For symmetrical cyanines, the changes in the shapes of the electronic bands (their width, asymmetry, excess, and fine structure) as the chain elongates are governed by the competing effects of the vibronic and intermolecular interactions. The former decrease as the chain lengthens, causing the narrowing of the absorption bands for the lower vinylogs. On the other hand, the latter increase as chain lengthens, which leads to broadening of the bands for the higher vinylogs. The higher the solvent nucleophilicity and the greater the deviation of the electron-donor ability of the heterocycle from the average value the greater the broadening. Any elongation of the polymethine chain of symmetrical cyanines causes only narrowing of the bands and an increase in the asymmetry, excess, and structuring in the fluorescence spectra, which, unlike the absorption spectra, is independent of the electron-donor character of the heterocycles and the nature of the solvent. These effects are caused by the fact that, in contrast to absorption, changes in the shape of emission bands with increasing chain length are governed predominantly by vibronic rather than by intermolecular interactions.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1227–1239, July, 1994.     

Enhancement of Photocurrent Generation of a Novel Stilbazolium Dye Dimer in LB Monolayer Films

A novel dye dimer,bis-{[1-(N-hexadecyl-4-pyridinium)-2-(4-N,N-dimethylaminopheyl)] ethenyl} methane diiodide (C16BP) was synthesized,and the photoelectrochemistry of the dye Langmuir-Blodgett monolayer modified ITO electrode was investigated.For comparison,the photoelectrochemistry of the monomer (E)-N-hexadexyl-4-[2-(4-N,N-dimethylaminophenyl) ethenyl] pyridinium iodide (C16P) was also measured.The results show that the photocurrent generation property of the dimer is enhanced.The photocurrent generation quantum yield is 0.38% for C16BP,while that for C16P is 0.23%.     

超高效液相色谱-四极杆/静电场轨道阱高分辨质谱快速筛查染发剂中32种染料成分

建立了超高效液相色谱-四极杆/静电场轨道阱高分辨质谱快速筛查和分析染发剂中32种禁限用染料的分析方法。样品经甲醇-2 g/L抗坏血酸水溶液溶解提取,正己烷净化,用ZORBAX Eclipse Plus C_(18)(3.0 mm×100 mm,1.8μm)色谱柱分离,以甲醇-5 mmol/L乙酸铵水溶液为流动相进行梯度洗脱,采用正、负离子切换同时测定了32种染料成分,显著提高了检测通量。以全扫描模式下提取的保留时间和一级母离子精确质量数以及同位素丰度比,实现对染发剂中多种染料成分的快速筛查;以自动触发采集的二级碎片离子精确质量数进行确证。32种染料在相应的质量浓度范围内线性关系良好,相关系数(r~2)均大于0.99;定量下限(LOQ)为0.2～40μg/g,回收率为81.0%～110%,相对标准偏差(RSD)为3.3%～9.9%。该方法简单、准确、快速,适用于染发剂中多种禁限用染料成分的高通量快速定性筛查和定量分析。     

New Amphiphilic Polypyridyl Ruthenium（Ⅱ） Sensitizer and Its Application in Dye-Sensitized Solar Cells

Amphiphilic polypyridyl mthenium（Ⅱ） complex cis-di（isothiocyanato）（4,4＇-di-tert-butyl-2,2＇-bipyridyl）（4,4＇- dicarboxy-2,2＇-bipyridyl）ruthenium（Ⅱ）（K005） has been synthesized and characterized by cyclic voltammetry, ^1H NMR, UV-Vis, and FT-IR spectroscopies. The sensitizer sensitizes TiO2 over a notably broad spectral range due to its intense metal-to-ligand charge-transfer （MLCT） bands at 537 and 418 nm. The photophysical and photochemical studies of K005 were contrasted with those of cis-Ru（dcbpy）2（NCS）2, known as the N3 dye, and the amphiphilic ruthenium（Ⅱ） dye Z907. A reversible couple at E1/2=0.725 V vs. saturated calomel electrode （SCE） with a separation of 0.08 V between the anodic and cathodic peaks, was observed due to the Ru^Ⅱ/Ⅲ couple by cyclic voltammetry. Furthermore, this amphiphilic ruthenium complex was successfully used as sensitizers for dye-sensitized solar cells with the efficiency of 3.72% at the 100 mW·cm^-2 irradiance of air mass 1.5 simulated sunlight without optimization of TiO2 films and the electrolyte.     

Effect of Hydrophobic Chain of Dye Molecule and Surface of Active Crystal on the Organized Assemblies Formation of Dyes

Four derivatives of 5,5',6,6'-tetrachlorobenzimidazolocarbocyanine iodide with different long alkyl chain substituents in N-position of polymethine chromophore have been used for investigating the influence of hydrophobicity of dyes on the aggregation.It has been found that all dyes formed monomeric species in methyl alcohol. However, after addition of water to CH_3OH to change the polarity of the solvent, difference between dyes appeared.Addition of inorganic salt facilitated the J-aggregation of easy soluble dye, but it seems useless for the sparely soluble dye.Platelets cut from AgBr polycrystal or pressed AgBr powder have been used as substrate for adsorbing dyes. After addition of hexanoic acid, eventually the J-aggregate on AgBr surface could be destroyed.Voltammetry is a useful tool to investigate the interaction between dyes and AgBr. Experimental results showed that the longer the carbon chain substituents is, the stronger the interaction between AgBr and dyes would be.     

Real-time measurement of nitric oxide using a bio-imaging and an electrochemical technique

Nitric oxide (NO) is an important mediator responsible for numerous physiological phenomena. Transient levels of NO in biological systems usually range from nanomolar to micromolar concentrations, with a rapid return to basal levels normally seen following these increases. Because NO can diffuse only over a local area in limited time due to such low levels of production and due to its short life-time prior to degradation, high spatial and temporal resolutions are required for direct and continuous NO measurement if the physiological role of NO is to be investigated in any system. For such purposes, analytical methods based on bio-imaging and electrochemical techniques for the measurement of NO are useful. In this paper, we describe the successful application of these methods to a number of biological systems. Specifically, complementary application of these methods demonstrate that it is possible to detect real-time NO production from nervous tissue with high spatial and temporal resolutions.     

Improvement of plant parameters of the ROBO gamma irradiation facility due to design modification

Two industrial scale, “ROBO” type ⁶⁰Co gamma irradiation facilities have recently been put into operation in Syria and Peru, and the dosimetry commissioning of both plants have been carried out to determine dose distribution within products and to calculate plant parameters such as efficiency, dose uniformity ratio and throughput. There are some design modifications between the two plants in connection with the location of the carriers with respect to the source plaque and also to each other. The effect of these construction modifications on the plant parameters is discussed in the analysis of the dose distribution data measured in the carriers with depth and height among the four irradiation rows on both sides of the source plaque. The plant parameters were also calculated for different product densities using the technical data of the facilities, and the calculated and measured results were compared to each other.     

ξ-potential and surface dye-ability of poly(vinyl alcohol) fiber with different degree of formalization in a cationic dye solution

Summary The surface dyeability of the poly(vinyl alcohol) fiber with different degree of formalization was studied by measuring -potential of the fiber in alkaline aqueous solutions (pH 10) of a cationic dye Methylene Blue. With the increase in the dye concentration, the sign of the -potential of the fiber changed from negative to positive and thereafter the positive value approximated to saturated value, and the amount of dye adsorbed (expressed in mol/cm²-fiber) increased also. These results may possibly be attributed to the formation of the electrostatic bond between the fiber and the dye. The linear relations were found between and logC _d and its slope did not change with rise of temperature. The free energy of dyeing G (negative) calculated from the slope of the -logC _id curve, etc. increased with increasing the degree of formalization of the fiber. This fact corresponds to the increase in the surface dye adsorption with increasing the degree of formalization. With increasing the degree of formalization, the heat of dyeing H (negative) increased and the entropy of dyeing S (positive) decreased. The positive value of S for each fiber, suggests the formation of hydrophobic bond as a driving force to the dyeing of Methylene blue on the fiber surface in addition to the electrostatic bond.This paper is Part XXVII in a series on Studies on -potentials and Surface Dyeability of Natural and Synthetic Fibers in Dye Solution. Part XXVI: T. Suzawa andK. Kawakami, Nippon Kagaku Kaishi1975, No. 7,1134.