Peripherally and Axially Carboxylic Acid Substituted Subphthalocyanines for Dye‐Sensitized Solar Cells

A series of subphthalocyanines (SubPcs) bearing a carboxylic acid group either at the peripheral or axial position have been designed and synthesized to investigate the influence of the COOH group positions on the dye‐sensitized solar cell (DSSC) performance. The DSSC devices based on SubPcs with axially substituted carboxylic acid groups showed low photovoltaic performance, whereas peripherally substituted one exhibited higher power conversion efficiency owing to improved injection from LUMO of SubPcs to the TiO₂ conduction band.     

高效液相色谱-串联质谱法测定染发剂中11种苯胺和苯酚类染料

1引言在众多染发剂产品中,人工合成的氧化型染发剂由于染色效果好、色调丰富、颜色持久等优点,应用极为广泛。但这类染发剂多以芳香胺和/或酚类组分为有效成分,易引起人体过敏等不良反应,长期使用甚至可能导致"三致"。鉴于氧化型染发剂的安全性问题,我国《化妆品卫生规范》明确规定了其禁用和暂时允许使用组分的类别及限制条件,并推荐     

Molecular vibrational dynamics of rhodamine B dye in solution studied by femtosecond CARS

Spectrally dispersed femtosecond time-resolved coherent anti-Stokes Raman spectroscopy is utilized to study the ultrafast vibrational dynamics in rhodamine B dye in solution at room temperature. The anti-Stokes intensities are monitored as a function of time and wavenumber. By simply changing the timing of laser pulses, the vibrational dynamics of excited Raman transitions in rhodamine B molecules can be tracked and detected.     

Structures,g-tensors,and hyperfine coupling constants of L-α-alanine radicals in radiation dosimetry: An ab initio molecular dynamics simulation study

Alanine is used as a transfer standard dosimeter for gamma ray and electron beam calibration. An important factor affecting its dosimetric response is humidity which can lead to errors in absorbed dose calculations. Ab initio molecular dynamics calculations were performed to determine the environmental effects on the electron paramagnetic resonance (EPR) parameters of L-α-alanine radicals in acidic and alkaline solutions. A new result, not dissimilar to the closed-shell amino acid molecule alanine, is that the non-zwitterionic form of the alanine radical is the stable form in the gas phase while the zwitterionic neutral alanine radical is not a stable structure in the gas phase. Geometric and EPR parameters of radicals in both gas and solution phases are found to be dependent on hydrogen bonding of water molecules with the polar groups and on dynamic solvation. Calculations on the optimized free radicals in the gas phase revealed that for the neutral radical, hydrogen bonding to water molecules drives a decrease in the magnitudes of g-tensor components g _xx and g _yy without affecting neither g _zz component nor the hyperfine coupling constants (HFCCs). The transfer from the gas to solution phase of the alanine radical anion is accompanied with an increase in the spin density on the carboxylic group's oxygen atoms. However, for the neutral radical, this transfer from gas to solution phase is accompanied with the decrease in the spin density on oxygen atoms. Calculated isotropic HFCCs and g-tensor of all radicals are in good agreement with experiment in both acidic and alkaline solutions.     

Preparation of MnO2 Loaded Hydrothermal Carbon-coated Electrospun PAN Fiber Membranes for Highly Efficient Adsorption and Separation of Cationic Dye

Hydrothermal carbonaceous materials and MnO₂ have been proved to be promising adsorbents to remove organic dyes from wastewater. In this study, flexible MnO₂ loaded hydrothermal carbon-coated electrospun poly-acrylonitrile(AC/MnO₂/PAN) fiber membranes were fabricated by a facile one-step hydrothermal method and activated by NaOH solution. The composite fibers exhibited large adsorption capacity toward cationic dyes and excellent mechanical properties. The adsorption performance can be fitted well with pseudo-second-order model and Langmuir isotherm model. The maximum adsorption for methylene blue(MB), methyl violet(MV) and malachite green(MG) are 1173.27,1106.31 and 1129.89 mg/g, respectively, according to Langmuir fitting. The AC/MnO₂/PAN fiber membrane also showed satisfactory performances for selective adsorption and recyclability. In addition, based on selective adsorption, the AC/MnO₂/PAN fiber membranes that are repulsive to the anionic dye methyl orange(MO) can separate the MB/MO mixture solution by dynamic filtration. Thus, this work not only provides a facile strategy to fabricate large capacity adsorbents, but also demonstrates the potential applications in the dye wastewater treatment field.     

Immunosensor for Detection of the Textile Dye Disperse Orange 1 Based on Non‐conventional Competitive Assay

Textile dyes appear as an important class of compounds that has become a matter of public concern and a serious challenge for scientists and environmentalists due to their large‐scale production and extensive application. In this work, a non‐conventional competitive‐type amperometric immunosensor was successfully developed for detection of the textile dye Disperse Orange 1 (DO1). The DO1 was magnetically captured and separated from the sample solution using magnetic particles (MP) functionalized with the antibody anti‐DO1 and with HRP and gold electrodes were modified with the conjugate DO1‐BSA. Molecules of DO1 immobilized on the electrode surface and DO1 captured by MP compete for antibody binding sites. As a result, the amperometric signal decreases with increasing target DO1 concentration at the capture step, because this decreases, the attachment between the HRP coated MP and the electrode. This strategy allowed us to determine DO1 at the low detection limit of 0.87 ng mL^?1 with great specificity. Also, there were good recoveries for detection of the textile dye in river water samples without the need of sample pre‐treatment. The competitive amperometric immunosensor shows applicability for the determination of small molecules that cannot be determined by conventional competitive or sandwich immunosensors.     

The use of water-soluble phthalocyanines as textile dyes in nylon/elastane fabric: fastness and antibacterial effectiveness

This work reports on dyeing of nylon/elastane fabric with water-soluble phthalocyanines ( 1-4 ) bearing quinoline 5-sulfonic acid substituents on the peripheral or nonperipheral positions and determining the antibacterial efficiency of the phthalocyanine compounds and the dyed nylon/elastane fabrics. The light, washing, water, perspiration, and rubbing fastness properties of nylon/elastane fabrics dyed with phthalocyanines were also determined. The results showed that all dyed fabrics showed very good wet fastness values. The lightfastness value of the nylon/elastane fabric dyed with phthalocyanine dye ( 1 ) showed a much better value than the others. Also, the antibacterial efficiencies of the dyed nylon fabrics and the dye compounds were investigated against a gram-negative ( Escherichia coli ) and a grampositive ( Staphylococcus aureus ) bacteria by using disc diffusion method. The results showed that the dyed nylon/elastane fabrics and the compounds exhibited antibacterial activities against both bacteria.     

Living Supramolecular Polymerization of an Aza‐BODIPY Dye Controlled by a Hydrogen‐Bond‐Accepting Triazole Unit Introduced by Click Chemistry

An aza‐BODIPY dye 1 bearing two hydrophobic fan‐shaped tridodecyloxybenzamide pendants through 1,2,3‐triazole linkages was synthesized by a click reaction and characterized. ¹H NMR studies indicated that dye 1 exhibited variable conformations through intramolecular H‐bonding interaction, which is beneficial for the polymorphism of aggregation. The thermodynamic, structural, and kinetic aspect of the supramolecular polymerization of dye 1 was investigated by UV/Vis absorption spectroscopy, IR spectroscopy, AFM, TEM, and SEM. Biphasic aggregation pathways of dye 1 , leads to the formation of off‐pathway, metastable Agg. I and thermodynamically stable Agg. II with distinct H‐aggregation spectra and nanoscale morphology. The living manner of the supramolecular polymerization of dye 1 was demonstrated in seeded polymerization experiments with temperature‐modulated successive cooling–heating cycles.     

Effect of sunset yellow dye on morphological,optical, dielectric,thermal and mechanical properties of KDP crystal

Herein, we describe the growth and morphology of well-defined dyed crystals of KH₂PO₄ (potassium dihydrogen orthophosphate; KDP) containing organic azo (sunset yellow; SSY) dye in the {1 0 1} & {0 0 1} pyramidal growth sectors. An understanding on selective dye inclusion in various growth sector of host crystal is proposed, which will help in designing novel tailor-made dyed photonic crystals. The structural analysis and the identification of various functional groups present in as grown KDP crystals were carried out using powder XRD, FTIR and Raman studies. Solid state transmittance spectra for dyed KDP crystals displayed three absorption peaks at 230 nm, 311 nm and 477 nm, which were blue shifted for SSY dye in KDP crystal relative to neutral aqueous solution of SSY dye. These blue shifts in the absorption maxima confirm the successful incorporation of sunset yellow dye into the pyramidal growth sectors of dyed KDP crystals. The band around 409 nm in the photoluminescence emission spectrum indicates a violet emission. SSY dye doped KDP crystals showed enhanced dielectric properties and thermal stability as compared to pure KDP crystal. The mechanical strength of the KDP crystals estimated using Vickers microhardness test was found to decrease with the increase in SSY dye doping.     

Combinatıon of a Box-Behnken design technique with response surface methodology for optimization of the photocatalytic mineralization of C.I. Basic Red 46 dye from aqueous solution

The photodegradation of an industrial azo dye C.I Basic Red 46 was examined in a fixed-bed photoreactor using UV-lamps simulated to the solar irradiation. In our photodecolorization study, the UV/TiO₂ process was optimized using the Box-Behnken approach to evaluate the synergistic effects of three independent parameters (initial concentration of the dye, flow rate, and UV intensity) on mineralization effectiveness. The response surface methodology was in good promise with the prediction model (coefficients of determination of decolorization and mineralization were R²_Dec = 0.997 and R²_TOC = 0.994, respectively). The effects of the factors could be estimated from a second–order polynomial equation and student’s t-test. The optimal parameters of decolorization and mineralization were as follows: initial concentration of colorant 25 mg L⁻¹, rate of fluid flow 0.3 L min⁻¹, and ultraviolet light intensity 38.1 W m⁻². The decolorization and mineralization removal efficiency under these optimal conditions were 100% and 57.63% respectively. These results indicate that optimization using response surface methodology, based on the Box-Behnken approach, is an excellent tool for determining the optimal conditions, and the process can be easily extrapolated for a specific treatment of real waste water containing the azo dye C.I Basic Red 46. Also, the intermediates that were produced during photodegradation process of Basic Red 46 were determined by GC/MS.