Thermochemical Properties and Decomposition Kinetics of Ammonium Magnesium Phosphate Monohydrate

Ammonium magnesium phosphate monohydrate NH4MgPO4·H2O was prepared via solid state reaction at room temperature and characterized by XRD, FT-IR and SEM. Thermochemical study was performed by an isoperibol solution calorimeter, non-isothermal measurement was used in a multivariate non-linear regression analysis to determine the kinetic reaction parameters. The results show that the molar enthalpy of reaction above is （28.795 ± 0.182） kJ/mol （298.15 K）, and the standard molar enthalpy of formation of the title complex is （-2185.43 ± 13.80） kJ/mol （298.15 K）. Kinetics analysis shows that the second decomposition of NH4MgPO4·H2O acts as a double-step reaction： an nth-order reaction （Fn） with n=4.28, E1=147.35 kJ/mol, A1=3.63×10^13 s^-1 is followed by a second-order reaction （F2） with E2=212.71 kJ/mol, A2= 1.82 × 10^18 s^-1.     

Energetics of magnesium, strontium, and barium doped lanthanum gallate perovskites

LaGaO₃ perovskites doped with Sr or Ba at the La site and Mg at the Ga site were prepared by solid-state reaction or sol-gel method and characterized. Enthalpies of formation from constituent oxides at 298 K were determined by high-temperature oxide melt solution calorimetry. Energetic trends are discussed in terms of defect chemistry. As oxygen deficiency increases, formation enthalpies define three trends, LaGa_1−yMg_yO_3−δ (LGM), La_1−xSr_xGa_1−yMg_yO_3−δ (LSGM), and La_1−xBa_xGa_1−yMg_yO_3−δ (LBGM). They become less exothermic with increasing doping, suggesting a dominant destabilization effect from oxygen vacancies. The endothermic enthalpy of vacancy formation is 275±37, 166±18 and 138±12 kJ/mol of V_O^·· for LGM, LBGM and LSGM, respectively. Tolerance factor and ion size mismatch also affect enthalpies. In terms of energetics, Sr is the best dopant for the La site and Mg for the Ga site, supporting earlier studies, including oxygen ion conductivity and computer modeling.     

线型聚能装药的理论研究

本文提出了一端起爆的线型聚能装药射流形成的不定常理论模型。根据这一模型,当金属罩在爆轰波作用下的运动速度为已知时,则不论此速度是否是时间或初始位置的函数,都能得到射流形成时的速度,质量和位置等参数。 按照本文模型,Defourneaux.M.的定常射流形成定常模型是一个简单的特例。我们利用本文的模型对等厚度装药的情况进行了计算,并与实验结果比较,两者符合良好。同时计算结果表明,考虑射流形成的不定常因素,可以较好地解释射流头部的质量堆积和射流内部的反向速度梯度等实验现象。本文的模型可以为线型聚能切割索的设计提供较为准确的理论指导。     

四川泸定县泥石流灾害成因、特征与防治建议

泸定县地处川西高原与四川盆地的过渡地带,地质环境条件复杂,分布泥石流沟127条,发育密度054条·10km-2。在遥感解译和地面调查基础上,论述了泸定县泥石流灾害成因、发生特征、危害和发展趋势,提出了相关防治建议。(1)成因表现为复杂的断裂构造导致流域内松散物源丰富,较大的相对高差提供了良好势能条件,而汛期集中强降雨则提供了动能条件,且雨量条件中当日雨量与前期有效降雨量之间具有幂函数关系; (2)发生特征表现出典型的空间群发性(包括2005-06-30群发性泥石流、2005-08-11群发性泥石流和2006-07-14群发性泥石流)与时间的夜发性; (3)危害方式主要包括淤埋、冲毁、侵蚀、堵河4种,泥石流已造成74人死亡; (4)发展趋势表现为泥石流沟多处于形成期和发展期(113条,占89%),发生的年际准周期由20a缩短至不足10a,且发生条(次)由4条(次)增加至44条次(2005年); (5)泸定县泥石流防治的突出问题表现为城镇泥石流问题、泥石流堵塞主河问题、风景区泥石流问题与冲沟泥石流问题,建议通过科学规划、风险防御体系构建、土木工程治理、监测预警等措施予以防御。     

Influence of Fe2O3 and V2O5 on Crystalline Structure of Mg-Al Spinel Synthesized by Waste Aluminum Slag

Mg-Al spinel is synthesized by using industrial waste-residue and basic magnesium carbonate in the aluminum factory as the main raw materials. The influence of V2O5 and Fe2O3 mineralizers on the structure, cell parameters and microscopic morphology of synthesized Mg-Al spinel has been discussed. The Mg-Al spinel is characterized by using XRD, SEM and relevant analytical software, such as Philips plus, Rietveld quantification and so on. The experimental results show that certain amounts of V2O5 and Fe2O3 are beneficial to the formation of Mg-Al spinel, and the optimum addition of V2O5 and Fe2O3 is respectively 2wt% and 3wt%. V2O5 has few effects on cell parameters of Mg-Al spinel; but Fe2O3 can form solid solution with Mg-Al spinel in which Mg-Fe spinel can also dissolve to form continuous solid solution. Therefore, with the increase of Fe2O3 content, the cell parameters of Mg-Al approximately present linear increase.     

The standard enthalpy of formation of silver pivalate

The standard enthalpy of combustion of crystalline silver pivalate, (CH₃)₃CC(O)OAg (AgPiv), was determined in an isoperibolic calorimeter with a self-sealing steel bomb, Δ_c H ⁰ (AgPiv, cr)= −2786.9±5.6 kJ mol⁻¹. The value of standard enthalpy of formation was derived for crystalline state: Δ_f H ⁰(AgPiv,cr)= −466.9±5.6 kJ mol⁻¹. Using the enthalpy of sublimation, measured earlier, the enthalpy of formation of gaseous dimer was obtained: Δ_f H ⁰(Ag₂Piv₂,g)= −787±14 kJ mol⁻¹. The enthalpy of reaction (CH₃)₃CC(O)OAg(cr)=Ag(cr)+(CH₃)₃CC(O)O^.(g) was estimated, Δ_r H ⁰=202 kJ mol⁻¹.     

激光熔覆原位合成Nb(C,N)陶瓷颗粒增强铁基金属涂层

采用预涂粉末激光熔覆技术,在42CrMo基体上制备出原位合成Nb(C, N)颗粒增强的铁基复合涂层。X射线及扫描电镜分析结果表明：激光熔覆获得的涂层基体为耐氧化、耐蚀性良好的Fe-Cr细晶组织及少量的-Fe相,原位合成的Nb（C, N）呈块状弥散分布在基体上。进一步的磨损试验表明：这些颗粒增强相极大增强了抗磨损性能,与未熔覆的母材相比,其磨损失重仅为母材的1/9左右; 涂层在750 ℃恒温氧化条件下具有较好的抗氧化性能,氧化层主要由NbO1.1,Cr2O3相组成; 母材的氧化产物为Fe2O3,容易脱落,保护性能较差; 激光熔覆涂层的氧化膜厚度仅为未涂层的1/5。     

MoO_3/Si界面区钼掺杂非晶氧化硅层形成的第一性原理研究

采用基于密度泛函理论的第一性原理计算方法,通过模拟MoO_3/Si界面反应,研究了MoO_x薄膜沉积中原子、分子的吸附、扩散和成核过程,从原子尺度阐明了缓冲层钼掺杂非晶氧化硅(a-SiO_x(Mo))物质的形成和机理.结果表明,在1500 K温度下, MoO_3/Si界面区由Mo, O, Si三种原子混合,可形成新的稳定的物相.热蒸发沉积初始时, MoO_3中的两个O原子和Si成键更加稳定,同时伴随着电子从Si到O的转移,钝化了硅表面的悬挂键. MoO_3中氧空位的形成能小于SiO_2中氧空位的形成能,使得O原子容易从MoO_3中迁移至Si衬底一侧,从而形成氧化硅层;替位缺陷中, Si替位MoO_3中的Mo的形成能远远大于Mo替位SiO_2中的Si的形成能,使得Mo容易掺杂进入氧化硅中.因此,在晶硅(100)面上沉积MoO_3薄膜时, MoO_3中的O原子先与Si成键,形成氧化硅层,随后部分Mo原子替位氧化硅中的Si原子,最终形成含有钼掺杂的非晶氧化硅层.     

Cooperativity and cluster growth patterns in acetonitrile: A DFT study

Cooperativity in intermolecular interactions and cluster growth patterns of acetonitrile has been studied using M06L density functional theory. Cyclic, ladder‐type, stacked, cross‐stacked, and mixed patterns are studied. Total interaction energy (E_int) and interaction energy per monomer (E_m) show maximum stability and cooperativity in stacked clusters followed by cross‐stacked ones. As cluster size increased, magnitude of E_m showed significant increase. Compared to E_m of dimer (?2.97 kcal/mol), the increase is 2.6‐fold for 27mer . Higher stabilization in larger clusters is attributed to strong cooperativity in intermolecular C? H···N and dipolar interactions. Enhanced cooperativity in stacked structures is supported by atoms‐in‐molecule electron density (ρ) data. Sum of ρ at intermolecular bond critical points is the highest for stacked clusters. Further, area of negative‐valued molecular electrostatic potential is linearly related with E_int and showed the lowest value in stacked followed by cross‐stacked clusters, indicating maximum utilization of lone pair density and maximum cooperativity in such growth patterns. A red shift in the average C? N stretching frequencies with increase in the number of monomers and its direct correlation with E_int in stacked clusters also supported their stability. Further, two known crystal patterns of acetonitrile (α and β) with 16 monomers are optimized and compared with the most stable hexadecamer pattern and are found to show lower values for E_int and E_m compared to the latter. Based on this result, we predict the existence of a third crystal pattern for acetonitrile which will be more ordered and more stable than α and β forms. © 2014 Wiley Periodicals, Inc.