Performance of a sound card as data acquisition system and a lock-in emulated by software in capillary electrophoresis

The performance of fluorescence detectors in capillary electrophoresis is maximized when the excitation light intensity is modulated in time with optimal frequencies. This is especially true when photomultiplier tubes are used to detect the fluorescent light. The photomultiplier tube amplified raw output signal can in principle be captured directly by a personal computer sound card (PCSC) and processed by a lock-in emulated by software. This possibility is demonstrated in the present work and the performance of this new setup is compared with a traditional data acquisition system. The results obtained with this “PCSC and lock-in emulated by software” were of the same quality or even better compared to that obtained by conventional time integrators (Boxcars) and data acquisition boards. With PCSC the limits of detection (LOD) found for both naphthalene-2,3-dicarboxaldehyde-derivatized tyrosine and alanine were 3.3 and 3.5 fmol (injection of 5 nL of samples at 0.66 and 0.70 μmol/L), respectively. This is at least three times better compared to conventional systems when light emitting diodes (LEDs) are used as the excitation source in fluorescence detectors. The PCSC linear response range was also larger compared to conventional data acquisition boards. This scheme showed to be a practical and convenient alternative of data acquisition and signal processing for detection systems used in capillary electrophoresis.     

Double Pore Silica Gel Monolith Applied to Liquid Chromatography

Silica gels retaining double pore structure in the size ranges of micrometer and nanometer have been applied to the rod-shaped monolithic column for liquid chromatography. The macropore structure was designed by controlling the phase separation process induced by the hydrolysis and polycondensation of alkoxysilane, whereas the mesopore structure was tailored by the solvent exchange treatments on wet gels. The size exclusion chromatograms on polystyrene standards exhibited almost similar features for octadecyl-modified rod and conventional packed beads columns. The dependence of plate height on the velocity of mobile phase determined for amylbenzene was by far weaker in the rod column than in the packed beads column, suggesting that additional geometrical factors should be considered in describing the separation mechanism in the rod column.     

Spatial relaxation of electrons in nonisothermal plasmas

The spatial relaxation of electrons to homogeneous states under the action of space-independent electric fields is investigated in helium, krypton, and N₂ plasmas for various electric field strengths. These investigations are based on a new method recently developed for solving the one-dimensional inhomogeneous electron Boltzmann equation in weakly ionized, collision-dominated plasmas. Elastic as well as conservative inelastic collisions of electrons with gas atoms have been included in the kinetic treatment. The spatial relaxation is caused by an imposed direct disturbance in the velocity distribution of the electrons on a spatial boundary. A pronounced dependence of the relaxation structure and the resultant relaxation length on the atomic data of the electron collision processes in different gases has been found. Furthermore the relaxation process sensitively depends on the electric field strength in the region of medium field values.     

Morphogenetic control of calcite crystal growth in sulfonic acid based hydrogels

In this paper the mineralization of CaCO(3) in various hydrogel matrices is presented. Sulfonic acid based hydrogels were prepared by introduction of sulfonate-containing monomers into a polyacrylamide network. The sulfonate content of polyacrylamide-co-vinylsulfonate and polyacrylamide-co-allylsulfonate decreases during elution of the copolymers in demineralized water, indicating insufficient linking of the sulfonate-bearing monomers within the hydrogel. In contrast to this, acrylamidomethylpropanesulfonate (AMPS) effectively copolymerizes with acrylamide (AAm) monomers. To study the influence of spatial arrangement of ionic functional groups within hydrogel networks on the mineralization of CaCO(3), AMPS copolymers with different degrees of AMPS cross-linking were synthesized. For the mineralization experiments the copolymers were placed into a double-diffusion arrangement. Calcite as the thermodynamically stable modification of CaCO(3) was obtained with a particular morphology. The pseudocubic habitus resembles aggregates obtained by mineralization in pure polyacrylamide. However, closer examination of the aggregates by scanning electron microscopy (SEM) shows that the crystal growth in the AMPS copolymers is different from that observed in polyacrylamide. Whereas the morphology of the calcite aggregates could be fine-tuned by using copolymers with different sulfonate content, the spatial distribution of the ionic functional groups alters the course of crystallization. Calcium ions are locally accumulated due to the heterogeneous distribution of functional sulfonate groups within the copolymer network. Thereby the nucleation of calcite is triggered, resulting in enhanced mineralization.     

Transient electrophoresis of a charged porous particle

The starting electrophoretic motion of a porous, uniformly charged, spherical particle, which models a solvent-permeable and ion-penetrable polyelectrolyte coil or floc of nanoparticles, in an arbitrary electrolyte solution due to the sudden application of an electric field is studied for the first time. The unsteady Stokes/Brinkman equations with the electric force term governing the fluid velocity fields are solved by means of the Laplace transform. An analytical formula for the electrophoretic mobility of the porous sphere is obtained as a function of the dimensionless parameters , , , and , where a is the radius of the particle, κ is the Debye screening parameter, λ is the reciprocal of the square root of the fluid permeability in the particle, ρ_p and ρ are the mass densities of the particle and fluid, respectively, ν is the kinematic viscosity of the fluid, and t is the time. The electrophoretic mobility normalized by its steady-state value increases monotonically with increases in and , but decreases monotonically with an increase in , keeping the other parameters unchanged. In general, a porous particle with a high fluid permeability trails behind an identical porous particle with a lower permeability and a corresponding hard particle in the growth of the normalized electrophoretic mobility The normalized electrophoretic acceleration of the porous sphere decreases monotonically with an increase in the time and increases with an increase in from zero at .     

Phase-fixed double-group 3-Γ symbols. IV. Real 3-Γ symbols and coupling coefficients for the group hierarchies T* ⊃ C 3 * and T* ⊃ C 2 *

We present sets of real 3- symbols which correspond to explicitly given irreducible matrix representations for the two double group hierarchies T* C ₃ ^* and T* C ₂ ^* . They fit into the formalism exposed in a previous paper [1] on the general theory of 3- symbols and coupling coefficients and illustrate much of the discussion in a subsequent one [2] treating the particular properties of the double groups.     

On the electrophoretic mobility and zeta potential of montmorillonite in non-aqueous media

Experimental results on the electrophoretic velocity and mobility of Ca-montmorillonite in 2-propanol are reported. The variation of the electrophoretic velocity with the externally applied electric field and the particle size range, at constant volume fraction and temperature, is considered. Given the difficulties for determining the types and concentrations of ions present in these liquid media, two methods are discussed for the estimation of the double layer thickness and hence the product, necessary for the determination of the zeta potential () of the interface. Although both methods of calculation yield different values of, the results for the zeta potential are very similar in the regions of and characteristic of our systems. The application to the experimental data of three theoretical relations between electrophoretic mobility and zeta potential is also discussed.     

Sphericities of Double Cosets,Double Coset Representations,and Fujita’s Proligand Method for Combinatorial Enumeration of Stereoisomers

The concepts of double coset representations and sphericities of double cosets are proposed to characterize stereoisomerism, where double cosets are classified into three types, i.e., homospheric double cosets, enantiospheric double cosets, or hemispheric double cosets. They determine modes of substitutions (i.e., chirality fittingness), where homospheric double cosets permit achiral ligands only; enantiospheric ones permit achiral ligands or enantiomeric pairs; and hemispheric ones permit achiral and chiral ligands. The sphericities of double cosets are linked to the sphericities of cycles which are ascribed to right coset representations. Thus, each cycle is assigned to the corresponding sphericity index (a _d , c _d , or b _d ) so as to construct a cycle indices with chirality fittingness (CI-CFs). The resulting CI-CFs are proved to be identical with CI-CFs introduced in Fujita’s proligand method (S. Fujita, Theor. Chem. Acc. 113 (2005) 73–79 and 80–86). The versatility of the CI-CFs in combinatorial enumeration of stereoisomers is demonstrated by using methane derivatives as examples, where the numbers of achiral plus chiral stereoisomers, those of achiral stereoisomers, and those of chiral stereoisomers are calculated separately by means of respective generating functions.     

3—Mercaptopropionic Acid Capped Gold Nanoclusters：Quantized Capacitance in Aquesous Media

3-Mercaptopropionic acid monolayer protected gold nanoclusters (MPA-MPCs) were synthesized and characterized by transmission electorn microscopy,UV-Vis spectroscopy,X-ray photoelectron spectroscopy and Fourler transform infrared spectroscopy.The exact value of quantized double-layer capacitance of MPCs in aqueous media was obtained by differential pulse voltammograms.     

Controlled ring‐opening polymerization of propylene oxide catalyzed by double metal‐cyanide complex

A double metal‐cyanide catalyst based on Zn₃[Co(CN)₆]₂ was prepared. This catalyst is very effective for the ring‐opening polymerization of propylene oxide. Polyether polyols of moderate molecular weight having low unsaturation (<0.015 meq/g) can be prepared under mild conditions. The molecular weight of polymer is entirely controlled by a reacted monomer‐to‐initiator ratio. The polymers prepared with stepwise addition of monomer exhibit a narrower molecular weight distribution as compared with those prepared with one‐step addition of monomer. Various compounds containing active hydrogen, except basic compounds and low‐carbon carboxylic acid, may be used as initiators. The reaction rate increases with increasing catalyst amount and decreases with rising initiator concentration. Polymerization involves a rapid exchange reaction between the active species and the dormant species. It was also proven that, to a certain extent, the chain termination of this catalytic system is reversible or temporary. ¹³C NMR analysis showed that the polymer has a random distribution of the configurational sequences and head‐to‐tail regiosequence. It is assumed that the polymerization proceeds via a cationic coordination mechanism. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1142–1150, 2002