CO2,O2,CF4液体微滴喷射靶激光等离子体光源光谱

基于软X射线辐射计量和极紫外投影光刻(EUVL)应用,研制了一台使用纳秒激光器的液体微滴喷射靶激光等离子体(LPP)极紫外光源。该光源由一个可连续控温的不锈钢电磁喷气阀门、YAG激光器和能同步控制喷气阀门和激光器的脉冲发生器组成。使用液氮作致冷剂,控温范围77～473 K。对于足够高的背景气压和低的阀门温度,当气体经过阀门脉冲式地喷入真空靶室内时,气体经过气-液相变碎裂成大量的液体微滴形成液体微滴喷射靶。首先,依据非相对论量子力学理论,使用原子光谱分析常用的Cowan程序,计算了O2,CO2和CF4等几种液体在1011～1012W.cm-2激光功率密度下可能相应产生的O4 ,O5 ,O6 ,O7 ,F5 ,F6 和F7 离子的电偶极辐射跃迁波长和跃迁概率。其次,在激光焦点功率密度为8×1011W.cm-2时,测量了CO2,O2,CF4液体微滴喷射靶在6～20 nm波段的光谱。理论计算结果与实验结果相比较,得出了所测量谱线的电偶极辐射跃迁波长和跃迁概率以及跃迁能级所应归属的组态和光谱项。     

Biological Risk Assessment of Three Dental Composite Materials following Gas Plasma Exposure

Gas plasma is an approved technology that generates a plethora of reactive oxygen species, which are actively applied for chronic wound healing. Its particular antimicrobial action has spurred interest in other medical fields, such as periodontitis in dentistry. Recent work has indicated the possibility of performing gas plasma-mediated biofilm removal on teeth. Teeth frequently contain restoration materials for filling cavities, e.g., resin-based composites. However, it is unknown if such materials are altered upon gas plasma exposure. To this end, we generated a new in-house workflow for three commonly used resin-based composites following gas plasma treatment and incubated the material with human HaCaT keratinocytes in vitro. Cytotoxicity was investigated by metabolic activity analysis, flow cytometry, and quantitative high-content fluorescence imaging. The inflammatory consequences were assessed using quantitative analysis of 13 different chemokines and cytokines in the culture supernatants. Hydrogen peroxide served as the control condition. A modest but significant cytotoxic effect was observed in the metabolic activity and viability after plasma treatment for all three composites. This was only partially treatment time-dependent and the composites alone affected the cells to some extent, as evident by differential secretion profiles of VEGF, for example. Gas plasma composite modification markedly elevated the secretion of IL6, IL8, IL18, and CCL2, with the latter showing the highest correlation with treatment time (Pearson’s r > 0.95). Cell culture media incubated with gas plasma-treated composite chips and added to cells thereafter could not replicate the effects, pointing to the potential that surface modifications elicited the findings. In conclusion, our data suggest that gas plasma treatment modifies composite material surfaces to a certain extent, leading to measurable but overall modest biological effects.     

类氢氖在高温高密度等离子体中的光谱漂移

 采用离子球模型,通过自洽求解Poisson方程和Dirac方程,得到氖的类氢离子低能级组态的能级能量随等离子体电子温度和电子密度的变化关系,进一步研究了等离子体电子温度和电子密度对光谱漂移的影响。结果表明：光谱漂移随着等离子体电子密度的增大而增大,随着电子温度的升高而减小;谱线精细结构分裂随着电子密度的增大而减小,随着电子温度的升高而增大。等离子体对束缚电子的屏蔽是决定光谱漂移的主要原因。这些变化规律不仅对等离子体光谱模拟结果产生影响,而且使实验上观测光谱的相对或绝对漂移成为可能,从而为高密度等离子体诊断的新方法提供了理论依据。     

N2/Ti微空心阴极放电等离子体阴极溅射模拟

采用Monte Carlo方法模拟N2/Ti微空心阴极放电等离子体阴极溅射过程,其中,氮离子(N2+,N+)轰击阴极表面采用PIC/MC模型模拟.计算溅射钛原子的热化过程、钛原子的密度及其平均能量分布.结果表明,沿各方向溅射出的90%金属Ti原子所带的初始能量小于30 eV,其散射角主要分布在30°和60°之间;溅射Ti原子在离微空心阴极壁约0.04 mm处出现热化极大值.     

辉光等离子体辅助化学气相沉积低温合成金刚石薄膜的研究

采用辉光放电等离子体增强化学气相沉积 (GP CVD)技术在低温条件下合成了高品质的亚微米金刚石薄膜 ,并通过对合成过程的实时发射光谱诊断确定了 [CH4 H2 ]系统参与金刚石合成反应的主要荷能粒子。对合成过程的研究表明 :采用这种技术能使电子增强热丝化学气相沉积 (EACVD)合成高品质金刚石薄膜的温度从 85 0℃降至 (340± 5 )℃ ;薄膜低温合成中的主要荷能粒子为CH3 、CH ,CH+ 、H 等 ,其中过饱和原子氢保证了高品质金刚石薄膜的合成 ;根据光诊断和探针测量的结果推断近表面辉光放电可在基片表面形成电偶极层 ,该偶极层是进行超常态反应的必要环境 ,并在低温合成中起重要作用     

ICP-AES法测定滑石中主次量成分

本文报道了采用ICP－AES法测定滑石中的成分。将滑石试样经碳酸钠、硼砂混合熔剂熔融、酸浸取，用电感耦合等离子体原子发射光谱法（ICP－AES）同时测定SiO2,MgO,CaO,Al2O3,Fe2O3，方法回收率在98.8%-104.0%，测定的RSD(n=6)在0.12%-0.24%之间，测试结果与部颁标准的化学分析法基本相符。     

HL-2M 装置运行控制技术初步研究

重点介绍了 HL-2M 装置的运行技术和初步的等离子体控制实验结果,包括等离子体放电方案设计、 线圈电流控制、击穿阶段零场匹配和等离子体电流以及位移的控制。为了降低放电运行风险,HL-2M 装置初始放 电采用了简化的放电方案,通过整定 PID 参数实现了线圈电流控制,在击穿阶段获得了 10V 以上的环电压和较大 范围的零场区域,成功实现等离子体击穿。最后,投入了等离子体电流和水平位移反馈控制算法,成功将等离子 体放电脉宽提升至 200ms 以上,且维持 I_p≥100kA 的时间超过了 100ms,上述结果表明 HL-2M 装置运行控制技术 得到了初步的检验。      

High sensitivity dual core photonic crystal fiber sensor for simultaneous detection of two samples

The optical control ability of photonic crystal fiber (PCF) is a distinctive property suitable for improving sensing and plasma performance. This article proposes a dual-core D-channel PCF sensor that can detect two samples simultaneously, which effectively solves the problems of coating difficulty and low wavelength sensitivity. The PCF has four layers of air holes, which dramatically reduces the optical fiber loss and is more conducive to the application of sensors in actual production. In addition, by introducing dual cores on the upper and lower sides of the central air hole, reducing the spacing between the core and the gold nanolayer, a stronger evanescent field can be generated in the cladding air hole. The optical fiber sensor can detect the refractive index of two samples simultaneously with a maximum sensitivity of 21300 nm/RIU. To the best of our knowledge, the sensitivity achieved in this work is the highest sensitivity with the dual sample synchronous detection sensors. The detection range of the refraction index is 1.35-1.41, and the resolution of the sensor is 4.695×10^-6. Overall, the sensor will be suitable for medical detection, organic chemical sensing, analyte detection, and other fields.     

13.56 MHz/2 MHz柱状感性耦合等离子体参数的对比研究

通过Langmuir双探针和发射光谱诊断方法,对比研究了驱动频率为13.56 MHz和2 MHz柱状感性耦合等离子体中电子密度和电子温度的径向分布规律.结果表明:在高频和低频放电中,输入功率的增加对等离子体参数产生了不同的影响,高频放电中主要提升了电子密度,低频放电中则主要提升了电子温度.固定气压为10 Pa,分别由高频和低频驱动时,电子密度的径向分布均为"凸型".而电子温度的分布差异比较明显,高频驱动时,电子温度在腔室中心较为平坦,在边缘略有上升;低频驱动时,电子温度随径向距离的增加而逐渐下降.为了进一步分析造成这种差异的原因,在相同放电条件下采集了氩等离子体的发射光谱图,利用分支比法计算了亚稳态粒子的数密度,发现电子温度的径向分布始终与亚稳态粒子的径向分布相反.继续升高气压到100 Pa,发现不论高频还是低频放电,电子密度的径向分布均从"凸型"转变为"马鞍形",较低气压时电子密度的均匀性有了一定的提升,但低频的均匀性更好.     

大电流稳定发射铁电阴极的模拟与实验研究

讨论了铁电阴极的发射机理, 借助MAFIA对不同电极结构的铁电阴极表面电场分布进行了模拟计算. 计算中发现, 发射面电极结构对铁电阴极表面三界点处的场增强效应影响很大,特别是具有孤岛电极结构的铁电阴极具有更大的三界点场强,从而获得更大和更稳定的发射电流. 通过对电极结构及其工艺的改进,使用PLZT铁电阴极在实验中得到了大于100A的电流.