Surface plasmon resonance sensors based on Ag-metalized nanolayer in microstructured optical fibers

Surface plasmon resonance sensors based on Ag-metalized nanolayer in microstructured optical fibers are theoretically analyzed by using finite element method (FEM). In our simulations we use Drude-Lorentz model to describe the metal dielectric constant. The numerical results show that the sensitivity of Ag-metalized SPR sensor could reach 1167 nm/RIU and corresponding resolution is 8.57×10⁻⁵ RIU. Compared to conventional Au-metalized SPR sensors the performance of our device is obviously better.     

A novel polarization splitter based on dual-core hybrid photonic crystal fibers

Highly birefringent dual-core photonic crystal fibers (PCFs) can be used as a polarization splitter because the orthogonal polarization modes with dissimilar coupling lengths are easily separated from each other. Different from the traditional methods achieving high birefringence, a new highly birefringent hybrid PCF that guides light by both index guiding and bandgap guiding is proposed. Firstly, a novel polarization splitter based on this kind of dual-core hybrid PCF is designed. The transmission modes, coupling lengths for the two orthogonal polarizations and performance of the proposed polarization splitter are investigated and numerically analyzed. The results demonstrate that it is possible to obtain a 4.72-mm-long polarization splitter. The splitting ratio is better than −20 dB in a large wavelength range of 1.53-1.72 μm. Its bandwidth is about 190 nm.     

Efficient anti-stokes signal generation through degenerate four wave mixing in an all solid photonic bandgap fiber

We reported the generation of visible red light through degenerate four wave mixing (FWM) in an all solid photonic bandgap fiber (PBGF), which was achieved by pumping the fiber with a 800 nm Ti:sapphire-based femtosecond pulse laser. At a fiber length of 30 m, a broadband anti-Stokes spectrum range from 620 nm to 740 nm was obtained at the highest pump power, the spectrum evolution as a function of pump power and propagation distance had been measured. Furthermore, the intensity-dependent parametric gain characteristic is also calculated, which accords well with the experimental results.     

Full L-band coverage of multiwavelength erbium-doped fiber laser

We propose and experimentally demonstrate a dual-pass unbalanced in-line Sagnac interferometer as a novel comb filter for implements in erbium-doped fiber lasers to obtain wide wavebands of multiwavelength radiations with enhancements of signal-to-noise ratios (SNRs). The hybrid combinations of the comb filter with the two schemes of nonlinear polarization rotation and intensity dependent loss have successfully not only enlarged the lasing bandwidth up to 47 nm but also enhanced the SNR up to 40 dB. The simultaneous lasing-wavelengths of 117 channels are also obtained. The multiwavelength lasing spectra with free spectral range of 0.4 nm covering the full L-band are useful for the applications of DWDM and WDM-PON systems.     

Optical transmission gratings by one driven three-level atom and a microtoroidal resonator

Based on the strong coherent interaction between a three-level ladder-type atom and a fiber-taper-coupled microtoroidal resonator, we present a scheme for optical transmission gratings. Using experimentally accessible parameters, it is shown that alternating regions of high transmission and absorption can be created in the fiber-taper channel by spatially modulating an external coupling field. The model shows an obvious effect which has a direct analogy with the phenomenon of electromagnetically induced grating (EIG) in quantum systems.     

Detection and analysis of paraffin oil adulteration in coconut oil using fiber optic long period grating sensor

A fiber optic sensing system for the detection of adulteration of coconut oil by paraffin oil is experimentally demonstrated. The sensing mechanism is based on the sensitive dependence of the resonance peaks of a long period grating (LPG) on the changes of the refractive index of the environmental medium surrounding the cladding surface of the grating. The wavelength shift of the attenuation bands of the LPG was measured with the sensor immersed in a mixture of paraffin oil and pure coconut oil in different proportions. Detection limit of adulteration was found to be 3% for coconut oil-paraffin oil binary mixture.     

All-optical method of developing a phase encoded latch by using EDFA

Optics has already proved its meaningful application in information processing and computation, where the parallelism of light is exploited to achieve the desired result. In this communication a novel concept of all-optical memory unit based on phase encoding process is proposed. The unit is simple in architecture comprising phase sifters, mirrors (M′) and two blocks of Erbium doped fiber amplifier. The optical feedback is supported by use of beam splitters and mirrors. It is independent of intensity and therefore requires a small switching power and can work at a bit rate far above 100 Gb/s.     

Geometrically distributed aperiodic circular photonic crystals with broad and isotropic photonic band gaps

In this paper, a new type of circular photonic crystal (CPC) with a geometrical distribution of concentric layers is presented. A broad and isotropic photonic band gap is achieved using this geometrically distributed CPC (GCPC). Also, the influence of the number of concentric layers to the overall band gap of GCPC is studied. It is demonstrated that the band gap broadens with a red shift when the number of concentric layers is increased. The reason for the red shift of the band gap is further investigated.     

Control of resonant peak depths of tunable long-period fiber gratings using overcoupling

We present a method to reduce changes in the resonant peak depth of a long-period fiber grating (LPFG) as the resonant band is tuned by varying the external refractive index. We theoretically analyze the effects of the initial coupling strength on the peak depth change as external refractive index is varied. By controlling the initial coupling strength, it is experimentally demonstrated that an optimum peak depth can be obtained over a range of operating wavelengths that will maximize the sensitivity and stability of LPFG based sensors and tunable filters.