辐照电子在光纤芯处能量沉积的计算

为了用尽可能低的辐照电子能量在光纤芯处形成大的性质改变,模拟了0.1～1 MeV能量的电子辐照二氧化硅.发现每一特定能量的电子辐照二氧化硅时,在其中有个能量沉积最快的位置.计算得到0.447 4 MeV能量的电子在单模光纤中心能量沉积最快,分析发现对于这个能量的电子多数可以穿透到光纤芯处,电子能量在光纤芯处的沉积主要是由于电子能量的减小造成的.这些结果可为用电子辐照光纤制作光器件时的初始电子能量选择提供参考.     

槲皮素包裹修饰硅包银纳米颗粒作为荧光传感器对铜离子的识别作用

制备了一种基于天然产物槲皮素接枝硅包银核壳结构的纳米荧光传感器(Ag@SiO₂@Qc),对铜离子具有好的选择性和灵敏性。Ag@SiO₂@Qc与Cu2+离子结合后,荧光发射强度发生猝灭,并且可通过荧光滴定光谱得到了荧光滴定曲线：y = -32.864x+587.59(R2=0.998),其线性范围分别为：3×10-7~4.8×10-6 mol·L-1,最低检测限为1.0×10-7 mol·L-1。并且将Ag@SiO₂@Qc应用于环境中水样的检测结果的准确度好,精密度高,而且更加环保、方便、快捷,具有很大发展潜力与应用价值。     

用Bragg光纤测量气体浓度

基于气体的光谱吸收特性,本文提出了一种采用Bragg空芯光纤作为吸收池的新型光纤气体传感器.运用解析法和微扰分析法求解了Bragg空芯光纤中的相对灵敏系数.由于场分布主要集中在芯区,对气体损耗较为敏感,因此,这种光纤气体传感器具有灵敏度高、快速响应、结构简单的特点.耦合多个波长可实现对多种气体同时测量.     

Influence of Er-doped superfluorescent fiber source's spectrum-stability on the SNR of fiber optic gyroscopes

The output spectrum-stability of Er-doped superfluorescent fiber source (SFS) was measured by changing the temperature around the excited Er-doped fiber (EDF). With the experiment results, the influences of the SFS's spectrum-stability on the signal-to-noise ratio (SNR) of fiber optic gyroscope (FOG) were simulated. The simulated results demonstrate that the SNR of FOG will change no matter the power, mean wavelength or the spectral bandwidth of the light output from the Er-doped SFS is changing. The results show that the changing of SNR caused by the output power's variation is three orders of magnitude larger than that caused by the variation of mean wavelength or bandwidth. And the main factor influencing the stability of FOG's SNR is the temperature-stability of the output power of Er-doped SFS.     

用于下一代传感和光源的新型材料、光纤及器件

制造技术与复杂模型、设计工具的进步使微纳结构光学器件的实现成为可能。微纳结构光学器件可用于导光与光的相互作用,液态或气态新型光源和传感器件。IPAS致力于新型光学材料研究与开发,将玻璃工艺和光纤开发有机结合,重点研究微纳结构光纤,光纤表面功能处理和器件开发。介绍了IPAS的研究实力和近年的发展概况,其中包括中红外光学材料、纳米粒子嵌入玻璃材料、新型化学和生物传感器(适用于超低量样本及/或体内样本)、激光器件,以及用于光数据处理的新型高非线性光纤。     

光纤化学传感技术研究近况

光纤化学传感器作为传感器的一个重要分支,结合了化学和光学的相关技术,将化学制膜、光纤技术以及化学分析中的分光光度法、拉曼光谱、荧光光谱、折射率检测等方法相融合,以其微型化,抗电磁干扰,传输信息量大,拥有自身参比等特点不断向前发展。简要综述了光纤化学传感技术研究近况和未来的发展趋势。重点对光纤pH化学传感器、光纤离子化学传感器和光纤气体化学传感器进行了介绍。简要分析了常见的敏感膜制备方法如化学键合法和溶胶凝胶(sol-gel)等方法。新型光纤——微结构光纤的出现为光纤化学传感器开辟了新的发展方向。由于其具有大的内表面积,结构设计灵活多样,光纤内部提供感应场所等特点,快速度成为光纤化学传感器的重要发展方向和研究热点。对微结构光纤衍生而来的新型光纤化学传感器进行了详细评述, 最后对光纤化学传感器的未来进行展望。     

连续级联喇曼光纤激光器耦合波方程的修正

从最基本的耦合波方程出发,考虑光波正反向传输的情况下,推导出了一个全面的、准确的关于连续级联喇曼光纤激光器的理论模型,描述了各级Stokes光波功率沿光纤长度的变化.指出了相关一些文献中存在的不足,并且给出了多级斯托克斯光波相互作用的有效作用面积的表达式.此模型有助于喇曼光纤激光器的设计.     

Nonlinear polarization rotation-induced pulse shaping in a stretched-pulse ytterbium-doped fiber laser

We report on controllable pulse shaping in a Yb-doped stretched-pulse fiber laser followed by a high-power chirped pulse amplifier. We demonstrate that the pulses after an extra-cavity grating pair change their intensity profile from Lorentz to Gaussian and then to sech2 shapes by adjusting the intra-cavity polarization through a quarter-wave plate inside the fiber laser cavity. The laser pulses with different pulse shapes exhibit pulse-to-pulse amplitude fluctuation of -- 1.02%, while the sech2-shaped pulse train is provided with a more stable free-running repetition rate as a result of the stronger self-phase modulation in the fiber laser cavity than Lorentz- and Gaussian-shaped pulse trains.     

厚二氧化硅光波导薄膜制备及其特性分析

以硅烷和氧化二氮作为反应气体，采用等离子体增强化学气相沉积(PECVD)技术，不使用掺杂，在单晶硅衬底上制备了用于平面光波导的二氧化硅薄膜。研究了薄膜折射率和淀积速率与工艺参量之间的关系，通过棱镜耦合仪、傅里叶变换红外光谱、原子力显微镜等测试手段，分析了薄膜的结构和光学特性。结果表明，实验能快速生长厚二氧化硅薄膜，薄膜表面平整，颗粒度均匀，同时薄膜具有折射率精确可控和红外透射性能好的特点，非常适合制作光波导器件。     

Variable temperature system using vortex tube cooling and fiber optic temperature measurement for low temperature magic angle spinning NMR

We describe the construction and operation of a variable temperature (VT) system for a high field fast magic angle spinning (MAS) probe. The probe is used in NMR investigations of biological macromolecules, where stable setting and continuous measurement of the temperature over periods of several days are required in order to prevent sample overheating and degradation. The VT system described is used at and below room temperature. A vortex tube is used to provide cooling in the temperature range of -20 to 20 degrees C, while a liquid nitrogen-cooled heat exchanger is used below -20 degrees C. Using this arrangement, the lowest temperature that is practically achievable is -140 degrees C. Measurement of the air temperature near the spinning rotor is accomplished using a fiber optic thermometer that utilizes the temperature dependence of the absorption edge of GaAs. The absorption edge of GaAs also has a magnetic field dependence that we have measured and corrected for. This dependence was calibrated at several field strengths using the well-known temperature dependence of the (1)H chemical shift difference of the protons in methanol.