Structural characterization of nanopatterned surfaces

In this work, chemically and topographically nanopatterned surfaces were produced by a top-down processing approach for biosensing devices. The nanopatterning was the result of the combination of plasma polymerisation (pp) of biofunctional materials and colloidal lithography techniques. The morphological and chemical properties induced by the plasma deposition-etching treatment were characterised by optical method combining ellipsometry and Fourier Transform Infrared spectroscopy studies. This method supported by atomic force microscopy measurements, allowed the full optical characterization of each step of the top-down process. The optical characterization of the end-up nanopatterned samples demonstrated that the chosen process is able to produce well-defined nanostructured surfaces with controlled chemical and morphological properties.     

用有限解析差分格式数值求解化学输运方程

本文用有限解析差分格式研究在多孔介质中化学输运问题的数值模型,系统地计算结果表明:1.有限解析差分格式能够消除数值弥散和伪振荡; 2.随着弥散数(Peclct数)的减小(增加),浓度突破曲线将延迟到达和形状变陡,最终趋近浓度对流曲线;3.当流速数增加后,非稳态吸附对浓度分布的影响趋近稳态吸附的影响。     

Two-dimensional adaptive Eulerian-Lagrangian method for mass transport with spatial velocity distribution

A Eulerian-Lagrangian scheme is used to solve the two-dimensional advection-dispersion equation. Concentration and its partial differential operator are decomposed into advection and dispersion terms. Thus, advection is formally decoupled from dispersion and solved by continuous forward particle tracking. Dispersion is handled by implicit finite elements on a fixed Eulerian grid. Translation of steep gradients of concentration in advection-dominated flow regimes, is done without numerical distortion. Continuous spatial distribution of velocities are evaluated by using Galerkin's approach in conjunction with Darcy's law based on hydraulic input data from each element. The method was implemented on coarse FE grid with linear shape functions, demonstrating no over/under shooting and practically no numerical dispersion. Simulations, covering a wide range of Peclet numbers, yield high agreement with analytic and practical results.     

Impacts of higher-order dispersions and saturable nonlinearities on modulation instability in negative-refractive metamaterials

On the basis of the standard linear stability analysis and Drude electromagnetic model,the impacts of higher-order dispersions and three kinds of typical saturable nonlinearities on modulation instability(MI) have been analyzed and calculated for negative-refractive metamaterials(MMs).Our results show that the MI gain spectra consist of only one spectral region instead of one or two regions in ordinary materials,which may be close to or far from the zero point.Particularly,the spectrum far from the zero point has a high cut-off frequency but a narrow spectral width,which is obviously beneficial to the generation of high-repetition-rate pulse trains.Moreover,MI characteristics here will vary with the normalized angular frequency which can be modified by adjusting the structures of negative-refractive MMs,signifying the controllability of bistable solitons and MI based applications.The effects of saturable nonlinearities are similar to those in ordinary materials.     

Analysis of resistive switching behaviors of vanadium oxide thin film

We demonstrated the polarization of resistive switching for Cu/VO_x/Cu memory cell. Switching behaviors of Cu/VO_x/Cu cell were tested by semiconductor device analyzer (Agilent B1500A), and the relative micro-analysis of I-V characteristics of VO_x/Cu was characterized by conductive atomic force microscope (CAFM). The I-V test results indicated that both forming and the reversible resistive switching between low resistance state (LRS) and high resistance state (HRS) can be observed under either positive or negative sweep. The CAFM images for LRS and HRS directly exhibited evidences of the formation and rupture of filaments based on positive or negative voltage. Cu/VO_x/Cu sandwiched structure exhibits a reversible resistive switching behavior and shows potential applications in the next generation nonvolatile memory field.     

异核碱金属原子间的三体相互作用系数

利用碱金属原子的模型势和稳定变分法,首次计算了异核碱金属原子间的三体相互作用系数.为了说明计算结果的精度,同时计算了碱金属原子的电多级极化率.与其他作者的理论数据和有关实验数据的比较表明,本文所得到的异核碱金属原子间的三体相互作用系数是可靠的.     

色散补偿光子晶体光纤结构参数对其色散的影响

光子晶体光纤由于其灵活可调的色散特性用作色散补偿具有极大的应用潜力. 设计了一种色散补偿光子晶体光纤, 并运用频域有限差分法模拟了其色散特性,从理论上分析了其结构参数孔间距Λ和空气占空比d/Λ对该光子晶体光纤的色散系数的影响, 并且实际制备出了3种不同结构参数的光子晶体光纤. 通过对其色散曲线对比分析表明: 当光子晶体光纤孔间距在1 μm附近时, 其色散系数随着孔间距Λ和占空比d/Λ的增大而增加, 但对于孔间距Λ的变化比占空比d/Λ更为敏感, 并且随着孔间距Λ的增加,其对色散系数的影响能力逐渐减小. 设计并制备的光子晶体光纤在1550 nm处的色散系数为-241.5 ps·nm^-1·km^-1, 相对色散斜率为0.0018, 具有较好的色散补偿能力. 关键词： 色散 色散补偿 光子晶体光纤 结构参数     

光滑粒子流体动力学方法固壁处理的一种新型排斥力模型

与传统网格法相比, 光滑粒子流体动力学方法不能直接施加壁面边界条件, 这就限制了该方法在工程中的应用.为此, 本文基于Galerkin加权余量法并结合传统排斥力方法, 推导出一种新的排斥力公式来施加壁面边界条件.该方法不含未知参数, 能在不减小边界粒子尺寸的情形下有效地防止流体粒子穿透壁面, 同时可避免邻近边界的流体粒子的速度及压力振荡. 分别通过静止液柱算例、液柱坍塌算例、容器中液体静止算例及溃坝算 例来验证本文方法的有效性, 并与传统边界处理方法进行对比, 结果表明: 本文方法克服了传统方法存在的缺陷, 是一种有效的固壁边界处理方法. 关键词： 光滑粒子流体动力学法 固壁边界 排斥力 加权余量法     

等离子体填充带状螺旋线的色散方程

利用线性场理论和螺旋线的导带模型，对填充等离子体的带状螺旋线进行了严格的场分析.在给出各区域电磁场分量表达式的基础上，利用螺旋带的边界条件，导出了等离子填充带状螺旋线中电磁波传播的色散方程. 关键词： 等离子体 带状螺旋线 色散方程     

Pt(110)表面自吸附原子能量和力的改进分析型嵌入原子法分析

采用改进分析型嵌入原子法计算了Pt(110)表面自吸附原子的能量和法向力.当Pt吸附原子位于Pt(110)表面第一层原子的二重对称洞位上0.11nm时最稳定.Pt吸附原子的最佳迁移路径是由一个二重对称洞位沿密排方向迁移到最近邻的另一个二重对称洞位.在吸附原子远离表面的过程中，将依次经过排斥、过渡和吸引等三个区域.在排斥区和过渡区，由于吸附原子与表面原子间强的相互作用势，吸附原子的能量和法向力的形貌图均为(110)面原子排列的复形，与对势理论和嵌入原子法得到的结果一致.在吸引区，由于多体相互作用及晶体中原子 关键词： 金属表面 自吸附 能量 力