强激光冲击铝合金改性处理研究

利用新型聚偏1.1-二氟乙烯（PVDF）压电传感器,实现了对激光引发的冲击波压力的实时测量,得到激光引发的冲击波峰压在铝中成指数型的衰减规律;观测了不同约束层材料在铝靶表面产生的激光冲击波,研究了不同约束层对冲击效果的影响;最后用激光冲击强化装置对7050-T7451航空铝合金结构材料进行了冲击强化处理,对试件激光冲击区存在的残余压应力及位错密度进行了测量。结果显示经激光冲击处理的试件表面具有极高的残余压应力,可达-200MPa以上。激光冲击处理后铝合金的位错密度得到显著的提高,疲劳寿命提高到175％～428％。这些重要结果对激光冲击改性处理技术的实际应用具有指导性作用。     

Stable edge dislocations in finite crystals

Dislocations have been considered as mechanically unstable defects in bulk crystals, ignoring the Peierls oscillations. Eshelby [J. Appl. Phys. 24 (1953) p.176] had showed that a screw dislocation can be stable in a thin cylinder. In the current work, considering Eshelby's example of an edge dislocation in a single crystalline plate, we show that an edge dislocation can be stable in a finite crystal. Using specific examples, we also show that the position of stability of an edge dislocation can be off-centre. This shift in the stability from the centre marks the transition from a stable dislocation to an unstable one. The above-mentioned tasks are achieved by simulating edge dislocations using the finite element method.     

非故意掺杂GaN薄膜方块电阻与载气中N2比例关系研究

利用金属有机气相外延方法研究了非故意掺杂GaN薄膜的方块电阻与高温GaN体材料生长时载气中N₂比例的关系.研究发现,随着载气中N₂比例的增加,GaN薄膜方块电阻急剧增加.当载气中N₂比例为50%时,GaN薄膜方块电阻达1.1×10⁸Ω/□,且GaN表面平整,均方根粗糙度为0.233nm.二次离子质谱分析发现,载气中N₂比例不同的样品中碳、氧杂质含量无明显差别.随着载气中N₂比 关键词： 半绝缘GaN薄膜 载气 金属有机气相外延 位错     

应变超晶格系统的共振行为及其动力学稳定性

在经典力学框架内和Seeger方程基础上,讨论了应变超晶格界面附近的位错动力学行为,指出了系统的非线性共振将导致位错的运动与堆积,并可能造成超晶格的分层或断裂.首先,引入阻尼项,在小振幅近似下,把描述一般位错运动的Seeger方程化为了超晶格系统的广义Duffing方程.利用多尺度法分析了系统的主共振、超共振和子共振,并找到了系统出现这三类共振的临界条件.结果表明,系统的临界条件与它的物理参数有关,只需适当调节这些参数就可以原则上避免共振的出现,保证了超晶格材料的完整性和性能的稳定性. 关键词： 位错动力学 应变超晶格 共振 分岔     

A chronological test of ocean-bottom spreading in the North Atlantic

Fission-track and K-Ar dating of basaltic glass from the Mid-Atlantic Ridge gives results which are consistent with the proposal of ocean-floor spreading. Correlation exists between the magnetic anomaly patterns over the Crest Mountains at 45°N and the age of the outcropping basalts. The observed sequences of ages progressing outward from the Median Valley 11,000, 230,000, 310,000, 750.000, 8,000,000, and 16,000,000 years constitute strong, direct support for the idea of ocean-bottom spreading.     

Atomistic simulation of kink structure on edge dislocation in bcc iron

Based on the general theory of dislocation and kink, we have constructed the three kink models corresponding to the 1/2 （111）{011} and 1/2 （111）{112} edge dislocations （EDs） in bcc Fe using the molecular dynamics method. We found that the geometric structure of a kink depends on the type of ED and the structural energies of the atom sites in the dislocation core region, as well as the geometric symmetry of the dislocation core and the characteristic of the stacking sequence of atomic plane along the dislocation line. The formation energies and widths of the kinks on the 1/2 （111）{011} and 1/2 （111）{112} EDs are calculated, the formation energies are 0.05eV and 0.04eV, and widths are 6.02b and 6.51b, respectively （b is the magnitude of the Burgers vector）. The small formation energies indicate that the formation of kink in the edge dislocation is very easy in bcc Fe.     

Atomistic Simulations of Integranular Fracture in Symmetric-Tilt Grain Boundaries

Fracture experiments on symmetric-tilt grain boundaries in Cu are interpreted using the Peierls-Nabarro continuum model of dislocation nucleation as a starting point. Good agreement is found only when the continuum model is modified according to the results of atomistic simulations. The same experiments are also reproduced by direct Molecular Dynamics simulations of fracture propagation and dislocation emission from a microcrack placed in the interface plane of the symmetric-tilt (221)(221) grain boundary in fcc Cu. Direction-dependent fracture response is observed, namely the microcrack advancing by brittle fracture along the [11 ] direction and being blunted by dislocation emission along the opposite [ 4] direction. Moreover, the simulations allow us to establish important differences with respect to the continuum-model predictions due to the shielding of the stress field at the crack-tip and to the presence of the residual stress at the interface.     

Shell Analysis and Effective Disorder in a 2D Froth

The static and evolutionary properties of two-dimensional cellular structures, or froths, are discussed in the light of recent work on structuring of the froth into concentric shells. Of interest is the dual role of a topological dislocation (defect) in an otherwise uniform froth, considered both as a source of disorder and also as a source generating a shell-structured froth. We present simulations on an initially uniform hexagonal froth. A defect is introduced by forcing either a T1 or T2 process in the stable structure, after which the froth is allowed to evolve according to von Neumann's law. In the first case, topological inclusions are found in the first few layers early in the evolution. In the second case, no inclusions appear over the entire evolutionary period. The growing disorder (as measured by the second moment of the side distribution, ₂) is isotropic. For the special case of a T2-formed froth in a uniform network, the SSI structure is retained with ₂0 only for the zeroth, first, and second layers. The ratio between topological perimeter and radius of the shells is close to 6, the value for a hexagonal froth.     

石墨颗粒/CuAlMn形状记忆合金复合材料中的位错内耗峰

利用渗流技术制备出了以石墨颗粒为阻尼增强相、以Cu-11.9Al-2.5Mn(wt%)形状记忆合金为基体的复合材料，对该合金的内耗行为进行了研究. 在淬火态样品的内耗-温度曲线上观察到两个内耗峰，分别位于240 ℃和370 ℃附近. 对其中低温峰的变化规律和机理进行了研究. 实验发现，低温峰仅在复合材料中出现，峰位与频率无关，峰高随频率升高而上升；随升温速率增加，峰高增加，峰位移向高温；随石墨颗粒体积分数增加，峰高增加；经多次热循环后该内耗峰消失. 由以上特征和微观观察，可以证明该峰起因于外加交变应力与位错的相互作用.     

Singular potentials and double-force solutions for anisotropic laminates with coupled bending and stretching

Summary Exact solutions are obtained in the framework of the classical theory of laminates subjected to the action of normal moments, double forces, double moments or momentless double dipoles. Seven cases of such loads are considered and completed by considering the case of given transversal discontinuity of normal deflection. It is shown that, in contrast to the case of infinite straight dislocations in a pure in-plane problem, the energy of this eighth solution depends on the discontinuity orientation. Some numerical examples are presented. Besides the formal value, the obtained double-force and double-moment solutions, as well as dimensionless double dipoles, can be used to construct kernels of additional boundary integral equations (BIE). Due to the coupling phenomena in the BIE system for the region with a corner point, additional variable such as corner forces appear and require the mentioned equation. Received 22 June 1999; accepted for publication 6 March 2000