Simulation of single‐ and two‐phase flows on sliding unstructured meshes using finite volume method

The paper presents an efficient finite volume method for unstructured grids with rotating sliding parts composed of arbitrary polyhedral elements for both single‐ and two‐phase flows. Mathematical model used in computations is based on the ensemble averaged conservation equations. These equations are solved for each phase and in case of single‐phase flow reduce to the transient Reynolds‐averaged Navier–Stokes (TRANS) equations. Transient flow induced by rotating impellers is thus resolved in time. The use of unstructured grids allows an easy and flexible meshing for the entire flow domain. Polyhedral cell volumes are created on the arbitrary mesh interface placed between rotating and static parts. Cells within the rotating parts move each time step and the new faces are created on the arbitrary interfaces only, while the rest of the domain remain ‘topologically’ unchanged. Implicit discretization scheme allows a wide range of time‐step sizes, which further reduce the computational effort. Special attention is given to the interpolation practices used for the reconstruction of the face quantities. Mass fluxes are recalculated at the beginning of each time step by using an interpolation scheme, which enhances the coupling between the pressure and velocity fields. The model has been implemented into the commercially available CFD code AVL SWIFT (AVL AST, SWIFT Manual 3.1, AVL List GmbH, Graz, Austria, 2002). Single‐phase flow in a mixing vessel stirred by a six‐bladed Rushton‐type turbine and two‐phase flow in aerated stirred vessel with the four‐blade Rushton impeller are simulated. The results are compared with the available experimental data, and good agreement is observed. The proposed algorithm is proved to be both stable and accurate for single‐phase as well as for the two‐phase flows calculations. Copyright 2004 John Wiley & Sons, Ltd.     

Fully adaptive multiresolution finite volume schemes for conservation laws

The use of multiresolution decompositions in the context of finite volume schemes for conservation laws was first proposed by A. Harten for the purpose of accelerating the evaluation of numerical fluxes through an adaptive computation. In this approach the solution is still represented at each time step on the finest grid, resulting in an inherent limitation of the potential gain in memory space and computational time. The present paper is concerned with the development and the numerical analysis of fully adaptive multiresolution schemes, in which the solution is represented and computed in a dynamically evolved adaptive grid. A crucial problem is then the accurate computation of the flux without the full knowledge of fine grid cell averages. Several solutions to this problem are proposed, analyzed, and compared in terms of accuracy and complexity.

     

低速二维流动的粒子仿真研究

本文运用信息保存法对低速二维的流动现象进行模拟，考察了低速条件下的有限平板绕流以及微槽道气体流动问题。研究表明：在对低速流动的模拟过程中，运用IP法在能够获得较好的结果的同时，具有比DSMC方法更高的计算效率。     

Performance of noise barriers with various edge shapes and acoustical conditions

The performances of barriers having different shapes and surface conditions were tested using the boundary element method in a well-controlled environment. The heights and widths of the barriers were standardized and the insertion losses for six receiver positions were averaged and compared. Figures displaying the results allow for straightforward barrier performance estimation. It was shown that absorbing and soft edges significantly improve the efficiency of the barrier, but configuration modifications provide only a slight improvement. The soft T-shaped barrier produces the highest performance. A 3 m high T-shaped barrier provides the same performance as a 10 m high plain barrier. The spectral efficiency was also investigated. The insertion loss spectra for the absorbing and the soft barriers exhibit a similar shape, but the rigid barrier differs from these two.     

Efficient discretization of pressure‐correction equations on non‐orthogonal grids

An alternative discretization of pressure‐correction equations within pressure‐correction schemes for the solution of the incompressible Navier–Stokes equations is introduced, which improves the convergence and robustness properties of such schemes for non‐orthogonal grids. As against standard approaches, where the non‐orthogonal terms usually are just neglected, the approach allows for a simplification of the pressure‐correction equation to correspond to 5‐point or 7‐point computational molecules in two or three dimensions, respectively, but still incorporates the effects of non‐orthogonality. As a result a wide range (including rather high values) of underrelaxation factors can be used, resulting in an increased overall performance of the underlying pressure‐correction schemes. Within this context, a second issue of the paper is the investigation of the accuracy to which the pressure‐correction equation should be solved in each pressure‐correction iteration. The scheme is investigated for standard test cases and, in order to show its applicability to practical flow problems, for a more complex configuration of a micro heat exchanger. Copyright © 2003 John Wiley & Sons, Ltd.     

O～3岁儿童微量元素检测及纠正150例观察与体会

对西安地区150例0～3岁儿童进行了六种微量元素：钙、锌、铜、铁、镁、硒的检测，发现微量元素缺乏可导致急慢性感染、免疫力低下、小儿营养不良、贫血、发育迟缓等症状。并对小儿营养不良、喂养不当进行矫正。其中铁、钙、锌同时缺乏占50％。     

All Subvarieties of ℒpq Have Finite Bases of Identities

We consider the varieties of lattice ordered groups with the identity of commutation of the nth powers of elements. We establish that every such l-variety with n=pq, where p and q are distinct prime numbers, has a finite basis of identities.     

潜热型热功能流体强化换热分析

本文建立了分析带有相变微胶囊的潜热型热功能流体的流动和换热过程数理模型,应用有限差分法和移动热源法进行联合求解。计算结果表明,相变微胶囊的加入:较好地提高了流体的换热性能。获得了相变颗粒大小和体积分数对强化换热影响等结果。计算结果对该类流体的设计和应用提供了理论依据。     

A study on the applications of the acoustic design sensitivity analysis of vibrating bodies

The determination of the sensitivity of the acoustical characteristics of vibrating systems with respect to the variation of the design parameters predicting these characteristics is a necessary and important step of the acoustic design and optimization process. Acoustic design sensitivity analysis includes the computation and evaluation of the sensitivity information required for this procedure. In this study, a boundary element code performing the sensitivity analysis of the acoustic pressure by using the matrix sensitivities with respect to different design variables has been developed. The effect of the precision of boundary element discretization on the acoustic pressure sensitivity is examined via this code. The formulation is applied to a multi-source system and the dimension sensitivity analysis of near field pressures of two-dilating-spherical source is performed. The last application is devoted to a real sound source: a washing machine sitting on the floor. Sensitivity of the field pressures to the machine’s dimensions (size), surface velocity and frequency is examined on the bases of the boundary element model of the machine and half-space condition. The impacts of these variables are compared; and a limiting speed for the machine responding both the acoustical and operational requirements is determined.