Resonant-cavity-enhanced photodetectors and LEDs in the mid-infrared

In this paper we outline the use of resonant-cavity enhancement for increasing the exterior coupling efficiency of photodetectors and light-emitting diodes (LEDs) in the mid-infrared (MIR) spectral region. This method is potentially very important in the MIR because encapsulation is not presently feasible due to the lack of suitable materials. Among other potential applications, resonant-cavity-enhanced (RCE) photodetectors and LEDs could be particularly suitable for greenhouse gas detection because of their ‘pre-tunable’ spectrally narrowed resonantly enhanced peaks. We also present the optical characterization of an InAs RCE photodetector aimed at the detection of methane gas (λ≈3.3 μm), and an InAs/InAs_0.91Sb_0.09 resonant-cavity LED (RCLED) aimed at carbon dioxide gas (λ≈4.2 μm). The high peak responsivity of the RCE photodetector was 34.7 A/W at λ=3.14 μm, and the RCLED peaked at λ=3.96 μm. These are among the longest operating wavelengths for III–V RCE photodetectors and RCLEDs reported in the literature.     

固体激光器的灯泵浦和二极管泵浦方式比较

对固体激光器的灯泵浦和二极管泵浦方式进行了比较,详细分析了不同类型的固体激光器所适用的泵浦方式.指出二极管泵浦固体激光器是今后固体激光器的发展趋势.     

10瓦级双包层光纤激光器

考虑到所用大功率激光二极管的光谱特性，对光纤激光器的基本法布里-珀罗腔型稍加改变，研制出激光二极管抽运的10w级双包层光纤激光器，获得最高功率为11．8w、波长1100mm的单模激光输出。     

InAs/GaAs quantum dot infrared photodetectors with different growth temperatures

InAs/GaAs quantum dot infrared photodetectors were fabricated with quantum dots grown at three different temperatures. Large detection wavelength shift (5–14.5 μm) was demonstrated by changing 40 degrees of the epitaxy temperature. The smaller quantum dots grown at lower temperature generate 14.5 μm responses. The detectivity of the normal incident 15 μm QDIP at 77 K is 3 × 10⁸ cm Hz^1/2/W. A three-color detector was also demonstrated with quantum dots grown at medium temperature. The three-color detection comes from two groups of different sizes of dots within one QD layer. This new type of multicolor detector shows unique temperature tuning behavior that was never reported before.     

WIDE RANGE DETECTOR USING PARABOLIC CYLINDRICAL MIRROR FOR THz APPLICATIONS

A new, wide-band, high-speed and high-sensitivity THz detector has been developed. The prototype detector consists of a parabolic cylindrical mirror, a long wire antenna and a Schottky barrier diode. Direct detection measurements have shown a stable sensitivity of 150 ± 50 V/W for 1–2 THz without any adjustments. The long wire antenna was fixed at the focus of parabolic cylindrical mirror then it has been realized less operation steps, easy coupling to the external THz signals and a dramatic enhancement in the practicality of this system. The optically polished mirror and frosted surface one showed comparable sensitivities, thus easy polishing and less cost mirror fabrication can be applied for this system. The radiation pattern showed a maximum radiation angle of approximately 23° with its dominant main lobe, which was attributed to the wire antenna character and confirmed good agreements with classical antenna theory.     

电子束装置运行稳定性的测量

 为了验证电子束装置的稳定性,分别对电流波形、电压波形进行了多次测量,对二极管放电时注入腔中电子均匀性进行了探测,最后改变二极管真空度测量了泵浦氩的荧光 谱的稳定性。     

工业CT图像均匀性校正

在工业CT图像重建过程中,射束硬化使得图像出现“杯状”伪影,阵列探测器响应不一致使得图像出现环状伪影、带状伪影和点伪影,影响图像均匀性.本文分析了射束硬化的原理和探测器响应不一致的数学模型,并通过实验,对探测器响应进行多挡板定标得到校正系数表.利用查表插值的方法对投影数据进行均匀性校正,消除上述伪影.     

自集成透镜InGaAsP／InPDHLED及其离子束铣技术

本文报道在国内首次采用离子束铣技术研制自集成透镜InGaAsP/InP DH LED的实验结果。采用烘烤正性光致抗蚀剂来形成球状掩膜适合于离子束铣,且重复性很好。为了获得光洁的刻蚀表面,刻蚀条件均已最优化。     

非标准色传感器引起的颜色误差分析

本文推导了两种非标准色传感器在测色时引入的误差公式,并对其进行分析。最后通过计算8个样品的颜色对分析结果给于验证。     

超大规模集成电路波导光互连技术的现状与前景

介绍超大规模集成电路(VLSI)波导(?)互连技术的最新进展,并预测其发展方向,以及如阿解决存在的实际问题。