第一过渡系金属-镝单分子磁体研究进展与展望

第一过渡系中的顺磁性离子Cr^Ⅲ、Mn^Ⅱ/Mn^Ⅲ、Fe^Ⅱ/Fe^Ⅲ、Co^Ⅱ、Ni^Ⅱ和Cu^Ⅱ及抗磁性离子Co^Ⅲ和Zn^Ⅱ均可与Dy^Ⅲ在多齿螯合配体配位下形成单分子磁体配合物。在本文中,我们阐述或汇总了几乎所有的第一过渡系金属-镝单分子磁体。对于由顺磁性第一过渡金属离子和Dy^Ⅲ离子形成的配合物,有2个有趣的现象需要引起人们的注意：一是一些Cr-Dy配合物具有较高的阻塞温度和较大的矫顽场,这可归功于配合物内Cr^Ⅲ离子和Dy^Ⅲ离子之间较强的磁耦合作用（|J|>10 cm^-1）。二是报道的Fe^Ⅱ₂-Dy配合物的能垒可达到319 cm^-1（459 K）,这在第一过渡系金属-镝单分子磁体中也是比较高的。这可能与Fe^Ⅱ₂-Dy中Dy^Ⅲ具有较高的轴向对称性（D_5h）有关,且从头计算表明该配合物中Dy的第一激发态也具有较高的轴向对称性。除了部分Cr-Dy和Fe^Ⅱ-Dy配合物外,其他顺磁性第一过渡金属-Dy的能垒较低,这可能由配合物内顺磁离子间弱的磁耦合造成的。为了消除磁耦合对磁弛豫行为影响,近年来人们关注于使用抗磁性第一过渡金属离子与Dy^Ⅲ构建单分子磁体配合物。相比其他核数的Zn-Dy配合物,三核Zn₂Dy配合物被报道的数目最多且研究得最为深入,这可能与较易调控Zn₂Dy中Dy配位几何对称性有关。最后,我们提出了几点关于进一步提升第一过渡系金属-镝单分子磁体的磁性能的建议,其中最为重要的是控制Dy配位几何的轴向对称性及Dy的基态m_J的电荷分布。对于第一过渡系金属-镝单分子磁体中的Dy^Ⅲ离子,Dy^Ⅲ基态m_J的电荷与配体的电荷之间的静电排斥应该降到最低。     

基于吡嗪空穴传输层的合成及在p-i-n型钙钛矿太阳能电池中的应用

钙钛矿太阳能电池由于具有高的光电转换效率,简单的溶液加工工艺,较低的成本等优势因而拥有广阔的应用前景。有机小分子空穴传输层材料在钙钛矿太阳能电池中扮演着极其重要的角色。在本工作中,我们设计和合成了基于吡嗪为分子中心核,三苯胺为分枝的X型空穴传输层材料PT-TPA。与Si-OMeTPA对比,吡嗪的引入不仅不会影响其结晶性,并且能够改善其电荷转移特性和分子中心共平面性,从而显著提升了PT-TPA的空穴迁移率。在非掺杂的情况之下,基于PT-TPA空穴传输层的p-i-n型钙钛矿太阳能电池展现出17.52%的光电转换效率,与相同条件下基于Si-OMeTPA空穴传输层的器件相比,效率提高了近15%。     

Analysis of the Magnetic Coupling in a Mn(II)-U(V)-Mn(II) Single Molecule Magnet

[{Mn(TPA)I}{UO2(Mesaldien)}{Mn(TPA)I}]I formula (here TPA=tris(2-pyridylmethyl)amine and Mesaldien=N,N’-(2-aminomethyl)diethylenebis(salicylidene imine)) reported by Mazzanti and coworkers (Chatelain et al. Angew. Chem. Int. Ed. 2014 , 53, 13434) is so far the best Single Molecule Magnet (SMM) in the {3d–5f} class of molecules exhibiting barrier height of magnetization reversal as high as 81.0 K. In this work, we have employed a combination of ab initio CAS and DFT methods to fully characterize this compound and to extract the relevant spin Hamiltonian parameters. We show that the signs of the magnetic coupling and of the g-factors of the monomers are interconnected. The central magnetic unit [U^VO₂]⁺ is described by a Kramers Doublet (KD) with negative g-factors, due to a large orbital contribution. The magnetic coupling for the {Mn(II)-U(V)} pair is modeled by an anisotropic exchange Hamiltonian: all components are ferromagnetic in terms of spin moments, the parallel component J_Z twice larger as the perpendicular one J_⊥. The spin density distribution suggests that spin polarization on the U(V) center favors the ferromagnetic coupling. Further, the J_Z/J_⊥ ratio, which is related to the barrier height, was found to correlate to the corresponding spin contribution of the g-factors of the U(V) center. This correlation established for the first time offers a direct way to estimate this important ratio from the corresponding g^S-values, which can be obtained using traditional ab initio packages and hence has a wider application to other {3d–5f} magnets. It is finally shown that the magnetization barrier height is tuned by the splitting of the [U^VO₂]⁺ 5 f orbitals.     

Label‐Free Biosensing over a Wide Concentration Range with Photonic Force Microscopy

We present a label‐free biosensor that measures molecular interactions between biomolecules on the surface of a probe bead and substrate over a wide concentration range. This system is capable of detecting target biomolecules with concentrations varying from 10 nM to 0.1 pM , with high selectivity and sensitivity.     

Aerolysin蛋白纳米孔道直接检测单个DNA碱基修饰

基于Aerolysin生物膜通道蛋白的纳米孔道电化学分析技术,因其高的电化学空间限域能力可实现超灵敏DNA单分子检测。本文利用单个Aerolysin纳米孔道在无需标记、无需扩增的条件下直接分辨3种具有单个碱基差异的单链DNA。实验结果显示,具有单个炔基侧链基团修饰的单个ss DNA在限域空间内与Aerol-ysin纳米孔道的相互作用时间较未修饰的ss DNA增长近7倍,电流阻断程度增大7%,且高斯峰半峰宽减小了44%,增强了Aerolysin纳米孔道对单个DNA分子的分辨能力。研究成果有望推动Aerolysin纳米孔在DNA直接测序及表观遗传修饰检测中的应用。     

壬基酚表面印迹聚合物微球的合成及分子识别特性

采用表面分子印迹技术,在二氧化硅微粒表面通过乙烯基三甲氧基硅烷接枝,以壬基酚(NP)为模板、α-甲基丙烯酸为功能单体制备了壬基酚印迹聚合物。扫描电镜及比表面分析仪测试结果表明制备的印迹聚合物呈均匀分散的微球,具有较大的比表面积。采用红外光谱表征印迹聚合物微球制备过程中的化学结构变化情况,并用平衡吸附法研究了聚合物对NP的结合性能与分子识别特性。研究结果表明,聚合物对壬基酚具有良好的结合亲和性,最大结合量可达184.6 mg/g。印迹聚合物对NP的吸附量高于其结构类似物对特辛基酚和双酚A的吸附量,表现出较高的选择性识别能力。     

单分子力谱研究活细胞上多药耐药相关蛋白1的表达

采用原子力显微镜的单分子力谱(SMFM)技术研究了多药耐药相关蛋白1(MRP1)与其抗体间的相互作用, 并考察了人舌癌细胞系TCA8113经高剂量平阳霉素(BLM)反复间歇诱导前后细胞表面MRP1的表达差异. 实验结果表明, MRP1与其抗体之间存在特异性相互作用力, 当针尖运动速率为2.5 μm/s时, 作用力大小约为(182±35) pN; 而且药物诱导后MRP1在人舌癌细胞上的表达明显增强. 本工作为了解活细胞水平上MRP1的表达提供了新方法, 有助于肿瘤细胞多药耐药性(MDR)的研究.     

Solid-state nanopores for ion and small molecule analysis

Solid-state nanopore in analytical chemistry has developed rapidly in the 1990s and it is proved to be a versatile new tool for bioanalytical chemistry. This review focuses on the analysis of ions and small molecules with nanopores including nanopipettes, polymer film nanopores, Si₃N₄ nanopores, graphene nanopores, MoS₂ nanopores and MOFs.     

Mechanical properties of single motor molecules studied by three-dimensional thermal force probing in optical tweezers.

A new method combining three-dimensional (3D) force measurements in an optical trap with the analysis of thermally induced (Brownian) position fluctuations of a trapped probe was used to investigate the mechanical properties of a single molecule, the molecular motor kinesin. One kinesin molecule attached to the probe was bound in a rigorlike state to one microtubule. The optical trap was kept weak to measure the thermal forces acting on the probe, which were mainly counterbalanced by the kinesin tether. The stiffness of kinesin during stretching and compression with respect to its backbone axis were measured. Our results indicate that a section of kinesin close to the motor domain is the dominating element in the flexibility of the motor structure. The experiments demonstrate the power of 3D thermal fluctuation analysis to characterize mechanical properties of individual motor proteins and indicate its usefulness to study single molecule in general