An Entropy-Based Anti-Noise Method for Reducing Ranging Error in Photon Counting Lidar

Photon counting lidar for long-range detection faces the problem of declining ranging performance caused by background noise. Current anti-noise methods are not robust enough in the case of weak signal and strong background noise, resulting in poor ranging error. In this work, based on the characteristics of the uncertainty of echo signal and noise in photon counting lidar, an entropy-based anti-noise method is proposed to reduce the ranging error under high background noise. Firstly, the photon counting entropy, which is considered as the feature to distinguish signal from noise, is defined to quantify the uncertainty of fluctuation among photon events responding to the Geiger mode avalanche photodiode. Then, the photon counting entropy is combined with a windowing operation to enhance the difference between signal and noise, so as to mitigate the effect of background noise and estimate the time of flight of the laser pulses. Simulation and experimental analysis show that the proposed method improves the anti-noise performance well, and experimental results demonstrate that the proposed method effectively mitigates the effect of background noise to reduce ranging error despite high background noise.     

Generalizations of Heisenberg uncertainty relation

A survey on the generalizations of Heisenberg uncertainty relation and a general scheme for their entangled extensions to several states and observables is presented. The scheme is illustrated on the examples of one and two states and canonical quantum observables, and spin and quasi-spin components. Several new uncertainty relations are displayed. Received 10 October 2001 / Received in final form 6 March 2002 Published online 2 October 2002 RID="a" ID="a"e-mail: dtrif@inrne.bas.bg     

时滞与噪声影响 Notch信号通路动力学的模型化研究

本文基于Hill动力学与Michaelis-Menten方程,建立理论模型研究时滞与噪声影响Notch信号通路动力学.研究发现,her1、her7基因转录的时滞性在很大程度上调控着Notch信号通路的动力学行为.由于时滞性的调控,Notch系统动力学经历Hopf分岔,由稳态转变为周期演化特性.通过考察Notch信号通路的噪声效应,我们发现,由于噪声的扰动,Notch系统周期振荡动力学改变.在较小噪声幅值条件下,Notch信号通路中改变的周期节律性可以通过时滞得以平衡恢复,由此表明了her1、her7转录的时滞性促进了Notch信号通路的周期振荡.对于较强噪声环境,时滞效应很难改变Notch信号的巨大突变,其信号通路动力学行为被噪声影响.理论结果符合实验,并揭示了时滞与噪声对Notch信号通路动力学的一种调控机制,可为设计阻止Notch功能异常导致的多种疾病和癌症的通路治疗方案提供理论依据.     

基于权重变分模型的地基IDOAS条带噪声去除

成像差分吸收光谱技术是成像光谱技术和差分吸收光谱技术的结合,能够采集图谱合一的数据立方,并通过光谱反演得到痕量气体浓度的二维分布信息.地基IDOAS仪器通过安装平台的水平旋转实现摆扫成像,可用于识别污染气体的排放源和监测气体的扩散情况.然而和所有的成像光谱技术相类似,地基IDOAS也容易出现条带噪声的问题,会产生相应的...     

EEMD修正爆破加速度零漂信号中的最优白噪声系数

为了有效降低振动信号误差以提高数据的可信度,先针对花岗岩爆破试验中的加速度零漂信号,使用集合经验模态分解(ensemble empirical mode decomposition,EEMD)与高低频处理相结合的方法进行修正;接着,根据信号冲击响应谱提出表征修正前后频域平均偏差幅度的修正指数;最后,基于频域和时域分别讨论了不同白噪声系数范围内信号的修正效果。分析表明:EEMD方法能够有效地消除爆破加速度信号的零漂现象,但对积分后速度信号的零漂趋势改善有限;随着白噪声系数增大,不同频段上修正指数均不同程度地增大,二者呈现幂指数关系;根据不同频段上的修正指数分析,可以确定不同零漂加速度信号对应的最优白噪声系数范围。本文提出的修正指数可为EEMD方法处理加速度零漂信号时白噪声系数的合理选取提供参考。     

基于不完备模态信息的结构损伤识别方法

针对结构损伤识别中的有限测点问题和测试噪声问题,提出一种基于模型修正法的损伤识别方法,仅利用结构的低阶频率和相应的不完备振型进行损伤识别。基于动力缩聚法构造参数化的振型扩展矩阵,解决振型不完备的问题,然后根据交叉模型交叉模态法CMCM(cross-model cross-mode)构造约束方程,并使用Hestenes-Powell增广拉格朗日乘子法求解约束优化问题,从而根据优化问题的最优解判断出损伤位置和损伤程度。在模态数据包含测试噪声的情况下,提出一种改进的CMCM方法,以减小测试噪声对损伤识别结果的影响。对一个25杆平面桁架进行数值仿真实验,结果表明,在3%的噪声水平下,仅需测得损伤结构的前5阶不完备模态,本文方法就能较准确地识别结构损伤。     

Determination of cavitation noise limiting value

ＤＥＴＥＲＭＩＮＡＴＩＯＮＯＦＣＡＶＩＴＡＴＩＯＮＮＯＩＳＥＬＩＭＩＴＩＮＧＶＡＬＵＥＨｕａｎｇＪｉｎｇ－ｃｈｕａｎ（黄景泉）（ＮｏｒｔｈｗｅｓｔｅｒｎＰｏｌｙｔｅｃｈｎｉｃａｌＵｎｉｒｅｒｓｉｔｙ,Ｘｉａｎ）（ＲｅｃｅｉｖｅｄＮｏｖ．１６．１９９２...     

Some pansystems studies on panchaos and strange panattractor

Paper [1] discussed the relations among panchaos and strange panattractor and pansystems operators. Paper [2] gave the applications of the fixed-point pansystems theorems to these typical nonlinear problems. In this paper, we firstly present several concepts: increasing relation, maximal panchaos, etc., and discuss the relations among them. We also discuss the problems when two increasing relations have the same panchaos and when panchaos of g is panchaos of g^t as well.     

Surface modified aluminium hydroxide in flame retarded noise damping sheets

Flame retarded polyethylene compounds were prepared using a series of aluminium hydroxide of different particle size applying a milling processes and special precipitation technologies. The processability and flame retardant efficiency of the flame retarded systems were compared. The effects of various surface modifications were analysed in case of one selected type of aluminium hydroxide. A silicone terminated reactive surfactant promoted not only the processability but also the flame retardant efficiency. Noise damping sheets were prepared by simultaneous application of aluminium hydroxide and barium sulphate in an elastomer blend matrix. V0 flame retardant grade could be achieved this way accompanied with improvement in the acoustic properties and maintenance of the mechanical properties.     

模式滤波器在色谱信号除噪中的应用

提出一种模式滤波器方法,用于解决色谱信号中宽带噪声的除噪问题。模式滤波器的应用原理是基于色谱信号与宽带噪声之间的形态差异。工作过程：先采用模式匹配方法识别宽带噪声,再识别各种噪声的起始点与终止点,最后采用线性插值方法重构含噪声的色谱信号。方法具有实现简单、运算速度快、去除噪声能力强等特点。由实际采集的色谱信号经除噪处理后所得的结果表明：模式滤波器比一般滤波器具有更好的除噪效果。