Fiber optical parametric amplifiers in optical communication systems

The prospects for using fiber optical parametric amplifiers (OPAs) in optical communication systems are reviewed. Phase‐insensitive amplifiers (PIAs) and phase‐sensitive amplifiers (PSAs) are considered. Low‐penalty amplification at/or near 1 Tb/s has been achieved, for both wavelength‐ and time‐division multiplexed formats. High‐quality mid‐span spectral inversion has been demonstrated at 0.64 Tb/s, avoiding electronic dispersion compensation. All‐optical amplitude regeneration of amplitude‐modulated signals has been performed, while PSAs have been used to demonstrate phase regeneration of phase‐modulated signals. A PSA with 1.1‐dB noise figure has been demonstrated, and preliminary wavelength‐division multiplexing experiments have been performed with PSAs. 512 Gb/s have been transmitted over 6,000 km by periodic phase conjugation. Simulations indicate that PIAs could reach data rate x reach products in excess of 14,000 Tb/s × km in realistic wavelength‐division multiplexed long‐haul networks. Technical challenges remaining to be addressed in order for fiber OPAs to become useful for long‐haul communication networks are discussed.

     

电解生成亚铁离子返滴定法测定消毒液中过氧化氢含量的数字化实验*

氧化还原与电解的相关知识是中学化学学习的重点内容。应用自主研制的MXLab21先进数字化实验系统电解Fe₂(SO₄)₃溶液,用电解生成的Fe²⁺直接滴定KMnO₄溶液以测定其浓度,再用返滴法测定消毒液中H₂O₂的含量。对恒电流电解的最佳条件如Fe₂(SO₄)₃溶液浓度及电解电流大小进行了优化。该数字化实验系统相比较于常规数字化仪器(或手持技术)的优越性在于其自带电解、搅拌及控制系统,能在电解的同时利用电生物质实现对待测物质的准确测定,测定时间短(不超过4 min)。本实验采用预设终点电势值的方法自动估计滴定终点,不但便捷准确,且呈现出的实时直观的电势和电量随时间变化的动态曲线便于学生理解电解及氧化还原滴定反应的微观本质,对中学化学教学及化学学科核心素养的培养具有重要价值。     

The Mechanism of Biochemical NO-Sensing: Insights from Computational Chemistry

The binding of small gas molecules such as NO and CO plays a major role in the signaling routes of the human body. The sole NO-receptor in humans is soluble guanylyl cyclase (sGC) – a histidine-ligated heme protein, which, upon NO binding, activates a downstream signaling cascade. Impairment of NO-signaling is linked, among others, to cardiovascular and inflammatory diseases. In the present work, we use a combination of theoretical tools such as MD simulations, high-level quantum chemical calculations and hybrid QM/MM methods to address various aspects of NO binding and to elucidate the most likely reaction paths and the potential intermediates of the reaction. As a model system, the H-NOX protein from Shewanella oneidensis (So H-NOX) homologous to the NO-binding domain of sGC is used. The signaling route is predicted to involve NO binding to form a six-coordinate intermediate heme-NO complex, followed by relatively facile His decoordination yielding a five-coordinate adduct with NO on the distal side with possible isomerization to the proximal side through binding of a second NO and release of the first one. MD simulations show that the His sidechain can quite easily rotate outward into solvent, with this motion being accompanied in our simulations by shifts in helix positions that are consistent with this decoordination leading to significant conformational change in the protein.     

甲烷与氯气取代反应实验的创新设计*

基于甲烷氯代反应的机理,对物质体系、反应容器、光照条件、实验表征等进行分析,创新设计甲烷氯代反应实验,利用数字化实验的压强和温度传感器采集的实验数据为支持,更直观地多重表征甲烷与氯气发生的“取代”过程,对于成功实现甲烷氯代反应实验具有指导意义。     

Main Components of Xinjiang Lavender Essential Oil Determined by Partial Least Squares and Near Infrared SpectroscopySCIEI北大核心CSCD

This work was undertaken to establish a quantitative analysis model which can rapid determinate the content of linalool, linalyl acetate of Xinjiang lavender essential oil. Totally 165 lavender essential oil samples were measured by using near infrared absorption spectrum(NIR), after analyzing the near infrared spectral absorption peaks of all samples, lavender essential oil have abundant chemical information and the interference of random noise may be relatively low on the spectral intervals of 7100-4 500 cm(-1). Thus, the PLS models was constructed by using this interval for further analysis. 8 abnormal samples were eliminated. Through the clustering method, 157 lavender essential oil samples were divided into 105 calibration set samples and 52 validation set samples. Gas chromatography mass spectrometry (GC-MS) was used as a tool to determine the content of linalool and linalyl acetate in lavender essential oil. Then the matrix was established with the GC-MS raw data of two compounds in combination with the original NIR data. In order to optimize the model, different pretreatment methods were used to preprocess the raw NIR spectral to contrast the spectral filtering effect, after analysizing the quantitative model results of linalool and linalyl acetate, the root mean square error prediction(RMSEP) of orthogonal signal transformation (OSC) was 0.226, 0.558, spectrally, it was the optimum pretreatment method. In addition, forward interval partial least squares (FiPLS) method was used to exclude the wavelength points which has nothing to do with determination composition or present nonlinear correlation, finally 8 spectral intervals totally 160 wavelength points were obtained as the dataset. Combining the data sets which have optimized by OSC-FiPLS with partial least squares(PLS) to establish a rapid quantitative analysis model for determining the content of linalool and linalyl acetate in Xinjiang lavender essential oil, numbers of hidden variables of two components were 8 in the model. The performance of the model was evaluated according to root mean square error of cross-validation (RMSECV) 9 root mean square error of prediction (RMSEP). In the model, RESECV of linalool and linalyl acetate were 0.170 and 0.416, respectively; RMSEP were 0.188 and 0.364. The results indicated that raw data was pretreated by OSC and FiPLS, the NIR-PLS quantitative analysis model with good robustness, high measurement precision; it could quickly determine the content of linalool and linalyl acetate in lavender essential oil. In addition, the model has a favorable prediction ability. The study also provide a new effective method which could rapid quantitative analysis the major components of Xinjiang lavender essential oil.     

基于AltiVec技术的PowerPC处理器矢量运算性能测试

基于AltiVec技术的PowerPC处理器,在很多嵌入式信号处理领域已经取代传统的DSP处理器成为信号处理器件的首选。为了评估基于AltiVec技术的PowerPC处理器的矢量运算性能和信号处理能力,选取MPC8641D处理器为硬件测试平台,采用符合VSIPL标准的VSI/Pro Core矢量库和ixlibsav矢量库,通过测试复乘和FFT典型算法不同类型的运算时间,对AltiVec处理单元的矢量运算性能进行了测试评估。通过对测试结果的分析,基于AltiVec技术的PowerPC处理器具备强大的矢量运算处理性能,可以满足嵌入式数字信号处理技术对高性能处理器的需求。     

Research on improving the accuracy of near infrared non-invasive hemoglobin detection

To optimize the accuracy of near-infrared non-invasive hemoglobin (Hb) clinical detection, high-performance instrument and prepossessing algorithm have been investigated. A near-infrared spectrophotometric system was constructed adopting InGaAs detector array with 16 pixels and plane grating spectrometer to obtain high signal noise ratio (SNR) spectral data. In our experiment, we applied the device independently to collect spectra data from 91 volunteers’ fingertips non-invasively. Two prediction tests were conducted to verify the effects of preprocessing algorithms improving the accuracy of near-infrared Hb detection and exclude the occasionality of satisfactory results in a single trial. Our non-invasive Hb detection methods were based on partial least squares (PLS). In each test, PLS, MSC coupled with PLS, DOSC coupled with PLS, three methods for non-invasive Hb detection, were analyzed respectively. The results of two trials showed that only DOSC & PLS performed excellently in both predictive ability and stability, obviously better than other two methods. Relative RMSEP was 6.16% in predicting test 1, 6.08% in predicting test 2, almost reaching the requirements of clinical application. It indicates that our independent-developed high-performance instrument and the method DOSC coupled with PLS are promising in non-invasive Hb detection clinical application.     

Shape memory behavior in Fe3Al-modeling and experiments

The Fe₃Al alloy with D0₃ structure exhibits large recoverable strains due to reversible slips. Tension and compression experiments were conducted on single crystals of Fe₃Al, and the onset of slip in forward and reverse directions were obtained utilizing high-resolution digital image correlation technique. The back stress provides the driving force for reversal of deformation upon unloading, resulting in a superelastic phenomenon as in shape memory alloys. Using density functional theory simulations, we obtain the energy barriers (GSFE – generalized stacking fault energy) for {1?1?0}〈1?1?1〉 and {1?1?2}〈1?1?1〉 slips in D0₃ Fe₃Al and the elastic moduli tensor, and undertake anisotropic continuum calculations to obtain the back stress and the frictional stress responsible for reversible slip. We compare the theoretically obtained slip stress magnitudes (friction and back stress) with the experimental measurements disclosing excellent agreement.     

Long‐Wavelength Fluorescent Reporters for Monitoring Protein Kinase Activity

In vivo optical imaging must contend with the limitations imposed by the optical window of tissue (600–1000 nm). Although a wide array of fluorophores are available that are visualized in the red and near‐IR region of the spectrum, with the exception of proteases, there are few long wavelength probes for enzymes. This situation poses a particular challenge for studying the intracellular biochemistry of erythrocytes, the high hemoglobin content of which optically obscures subcellular monitoring at wavelengths less than 600 nm. To address this, tunable fluorescent reporters for protein kinase activity were developed. The probing wavelength is preprogrammed by using readily available fluorophores, thereby enabling detection within the optical window of tissue, specifically in the far‐red and near‐IR region. These agents were used to monitor endogenous cAMP‐dependent protein kinase activity in erythrocyte lysates and in intact erythrocytes when using a light‐activatable reporter.     

A novel signal-on fluorescent aptasensor for ochratoxin A detection based on RecJf exonuclease-induced signal amplification

This article describes a simple and homogeneous fluorescent aptasensor for the detection of ochratoxin A (OTA). With its high specificity and simplicity; RecJ_f exonuclease is used to cleave DNA strand of the FAM-aptamer/OTA complex and realize target recycling signal amplification. In order to avoid the loss of reaction system, magnetic beads (MBs) are added only once at the last experimental step. This proposed fluorescent aptasensor showed the higher sensitivity in the range of 0.1–100 ng/mL with LOD of 0.056 ng/mL, and the good selectivity against other interfering toxins. The feasibility of the prepared aptasensor was studied by detecting OTA in spiked liquor and cereal samples. The obtained average recoveries ranged from 92% to 115%. This study provides a promising application with convenience and rapidness in the aptasensor fabrication for food safety analysis.