Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang     

三片式液晶投影仪的立体视觉研究

基于对三原色信号进行偏振特性的分析,提出了一种在三片式液晶投影显示设备上实现立体显示的新方法。该方法利用红色和蓝色信号光与绿色信号光在偏振方向上正交的特性,在信号通道之间引入视差,实现了三维立体显示。因此这种方法被称为补色偏振体视。介绍了该方法的基本原理,并详细叙述了用PHOTOSHOP软件制作补色偏振立体图对的方法。     

Magnetotransport and magnetic properties of InAs/Mn digital alloys

We have investigated the magnetic and magneto-transport properties of a systematic sequence of five InAs/Mn digital alloys grown by a combination of molecular beam epitaxy and atomic layer epitaxy. The samples consist of 30 periods of Mn fractional monolayers (ML) (0.17–0.5 ML) separated by 14 ML thick InAs spacer layers in a superlattice configuration. Four samples show n-type electrical conduction while the fifth (0.25 ML Mn) is p-type. Squid magnetization measurements performed on these samples show remnant magnetization above room temperature, which is apparently related to a second phase.     

调制不稳定性对级联放大光纤传输系统信噪比的影响

在考虑光纤损耗和级联放大器的情况下，推导了调制不稳定性的产生条件和增益的普适解析表达式，分析了调制不稳定性对信噪比的影响，给出了一个新的计算信噪比的表达式。     

变参数波振器中小信号增益公式

利用微扰展开技术推导出变参数波振器的小信号增益两个近似求积表达式并将其计算结果与数值模拟结果进行了比较,二者吻合很好。利用近似解析式对小信号增益进行了初步探讨,得到了电子入射能量可低于初始谐振能,能散度允许范围受波振器设计影响以及降低锥度改变率可提高小信号增益等新结论。     

Chemical imaging in biology and medicine using ion microscopy

The ability to quantitatively map the distribution of elements on the micrometer scale and smaller with high sensitivity and isotopic discrimination is unique to ion microscopy. The information contained in ion images can be crucial to the study of the solid state, where chemical heterogeneity is often directly related to observed behavior. The tools of digital image processing allow the extraction of quantitative information from the image data. These techniques coupled with improved instrumentation for the detection of ion images drastically increase the problem solving capabilities of the ion microscope. The use of such methods and instrumentation in the ion microscopic analyses of cell cultures and tissues of biological and biomedical relevance will be discussed.     

Model-Free Analysis of Mixtures by NMR Using Blind Source Separation

The concept of blind source separation is described and examples of its use in 1D and 2D NMR spectroscopy are presented. The goal of this data processing method is to extract the spectra of components molecules when only mixtures are available.     

韧性金属裂纹尖端损伤区内应变场测量——数字散斑相关法应用

本文用数字散斑相关方法测量了五种不同幂硬化指数韧性金属材料(铝和铜),双边裂纹尖端细观区域内应变场.对所得结果用韧性损伤模型进行了分析.在此法中以金属自然表面结构为散斑场,不同加载状态的散斑场进行比较,得到相对变形与应变.图象之间相关性 C 是变形参数或是位移及其导数的泛函.使其相关性 C 取最大值的试凑变形即为其真实变形场.这一方法在细观测量中应用得到满意的结果.     

Novel All Digital Scheme for Open Loop Fiber Optic Gyroscopes

ＮｏｖｅｌＡｌＤｉｇｉｔａｌＳｃｈｅｍｅｆｏｒＯｐｅｎＬｏｏｐＦｉｂｅｒＯｐｔｉｃＧｙｒｏｓｃｏｐｅｓＹＡＮＧＹｕａｎｈｏｎｇ（Ｔｈｅ５ｔｈＲｅｓｅａｒｃｈＤｉｖｉｓｉｏｎｏｆＢｅｉｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｓ＆Ａｓｔｒｏｎａｕ...     

无相移滤波技术用于分析化学信号处理

把无相移滤波技术引入了分析化学信号处理领域。其方法为：先将输入序列按顺序滤波，然后将所得结果逆转后反向通过滤波器，再将所得结果逆转后输出。通过对色谱信号的实验研究表明，与普通的数字滤波方法相比较，无相移滤波不但具有普通数字滤波的优点，而且不会产生滤波前后的相位偏移，具有良好的应用前景，尤其对于需要准确计算保留时间的场合，用此预处理方法非常适合。