Microstructure and wear resistance of laser clad cobalt-based alloy multi-layer coatings

Multi-layer Co-based alloy (HMSP 2537) were deposited on Ni-based superalloy plate with a TJ-TL-T5000 type CO₂ laser. Sections of such coatings were examined to reveal their microstructure and phase composition using optical microscope, scanning electron microscope (SEM), and X-ray diffractometer (XRD). The hardness and wear resistance of the coatings were tested. The results showed that the prime phase (γ-Co dendrite) and other phases, such as CrNi, Co₇W₆, and Cr₂₃C₆ existed in the coatings. Dendrite or cellular microstructures were observed perpendicular to the interface, and coarsening microstructures were obtained as more layers deposited. Dendrite paralleling to laser scan speed was also found near the top surface of the last layer. Fine microstructures of γ-Co dendrite and lamellar eutectic in inter-dendritic regions strengthened the coatings. Microhardness and wear resistance of the coatings were much higher than that of substrate but slightly decreased with layers increased.     

What Oxidation State of Iron Determines the Amethyst Colour?

A colourless quartz crystal doped with ⁵⁷Fe³⁺ was obtained by hydrothermal synthesis in an NH₄F solution. The crystal was transformed into violet amethyst by gamma-irradiation. The change in colour was accompanied by changes in the Mössbauer spectrum that can be interpreted as the conversion of trivalent iron into the tetravalent state: Fe³⁺→Fe⁴⁺.

     

两种测试高温超导薄膜微波表面电阻方法的讨论

介绍两种工作在12GHz附近的高温超导薄膜微波表面电阻Rs测试系统,并分析各自的特点.同时简介电子科技大学在提高Rs测试精度上所作的一些改进.     

欧姆接触中接触电阻率的计算

从欧姆接触电阻率的定义出发,先从理论上介绍了热离子发射、热离子场发射和场发射三种不同情况下欧姆接触电阻率的计算公式,然后详细地从实验上综合各种测试方法,并讨论了其利弊．     

343 nm飞秒激光制备微孔阵列以增强聚氨酯合成革透湿性

为了提高聚氨酯(PU)合成革透湿性,分别使用343 nm飞秒激光和作为对比的1030 nm飞秒激光及1064 nm纳秒激光制备微孔阵列。采用扫描电镜(SEM)和3D激光扫描显微镜对比研究了微孔形貌。结果表明,343 nm飞秒激光可以制备出效果最佳的微孔。此外,分析了3种激光与PU涂层的作用机理,揭示了343 nm飞秒激光合成革微钻孔过程仅表现为光化学烧蚀,光化学和光热烧蚀同时发生于1030 nm飞秒激光钻孔过程,而1064 nm纳秒激光只显示了光热烧蚀。激光合成革表面钻孔后,测量其透湿性和抗张力。结果显示: 微孔密度越大,皮革透湿性(WVP)越大而抗张力越低,脉冲重叠的增加会导致WVP的增加和抗张力的下降;同时,随着脉冲重叠从91.7%降到50%,微孔直径从45 μm降低到30 μm,而微孔锥度从0.7°增加到12.1°;当脉冲重叠率为91.7%,微孔密度为2550/cm²时,最大的WVP增长率为306%。     

The Linear Fokker-Planck Equation for the Ornstein-Uhlenbeck Process as an (Almost) Nonlinear Kinetic Equation for an Isolated N-Particle System

It is long known that the Fokker-Planck equation with prescribed constant coefficients of diffusion and linear friction describes the ensemble average of the stochastic evolutions in velocity space of a Brownian test particle immersed in a heat bath of fixed temperature. Apparently, it is not so well known that the same partial differential equation, but now with constant coefficients which are functionals of the solution itself rather than being prescribed, describes the kinetic evolution (in the N→∞ limit) of an isolated N-particle system with certain stochastic interactions. Here we discuss in detail this recently discovered interpretation. An erratum to this article can be found at     

基于边缘估计的自适应各向异性扩散的医学超声图像降噪算法

提出了一种针对医学超声图像的自适应各向异性扩散算法;该算法充分利用图像本身的边缘信息以及图像水平和垂直方向梯度的差异,用GHAD方法在两个方向设置不同的梯度门限,避免了传统的常数及单一梯度门限带来的鲁棒性差等问题;改进的扩散系数改善了传统扩散系数收敛过快及边界平滑的问题;经过多组仿真实验,综合峰值信噪比(PSNR)和边缘保持度(FOM)等指标,表明该算法相比同类算法有更好的降噪和边缘保持效果。     

Controlled water flooding of polymer electrolyte fuel cells applying superhydrophobic gas diffusion layer

Water transport is critical to the successful implementation of polymer electrolyte fuel cells (PEFC), especially in long-term and dynamic operation in automotives. Liquid water appears in the fuel cells not only from the water generated at the cathode catalyst layer but also as a result of condensation of water vapor from the humidified gases. In this study, we report a simple approach to prepare a superhydrophobic gas diffusion layer by chemical vapor deposition of polydimethylsiloxane without significant change in pore size of gas diffusion layer unlike other approach adding hydrophobic agent such as polytetrafluoroethylene. A superhydrophobic coating on the GDL can be obtained, leading to exceptionally enhanced power performance and stability of PEFC especially at a high current where water transport becomes more critical.     

Explicit inertial range renormalization theory in a model for turbulent diffusion

The inertial range for a statistical turbulent velocity field consists of those scales that are larger than the dissipation scale but smaller than the integral scale. Here the complete scale-invariant explicit inertial range renormalization theory for all the higher-order statistics of a diffusing passive scalar is developed in a model which, despite its simplicity, involves turbulent diffusion by statistical velocity fields with arbitrarily many scales, infrared divergence, long-range spatial correlations, and rapid fluctuations in time-such velocity fields retain several characteristic features of those in fully developed turbulence. The main tool in the development of this explicit renormalization theory for the model is an exact quantum mechanical analogy which relates higher-order statistics of the diffusing scalar to the properties of solutions of a family ofN- body parabolic quantum problems. The canonical inertial range renormalized statistical fixed point is developed explicitly here as a function of the velocity spectral parameter, which measures the strength of the infrared divergence: for<2, mean-field behavior in the inertial range occurs with Gaussian statistical behavior for the scalar and standard diffusive scaling laws; for>2 a phase transition occurs to a fixed point with anomalous inertial range scaling laws and a non-Gaussian renormalized statistical fixed point. Several explicit connections between the renormalization theory in the model and intermediate asymptotics are developed explicitly as well as links between anomalous turbulent decay and explicit spectral properties of Schrödinger operators. The differences between this inertial range renormalization theory and the earlier theories for large-scale eddy diffusivity developed by Avellaneda and the author in such models are also discussed here.     

(Zn、Cd)S:Cu、Br黄色交流电致发光材料的晶体结构和发光特性

本文首次提出一种制备黄色交流粉末电致发光材料的新方法.在以ZnS为基质的绿色材料的基础上,低温扩散CdS,获得系列黄材料.并测量了晶体结构和发光特性.