关于两类重要微分不等式

本文研究了两类重要微分不等式有界解的性质。引入了赋范线性空间(f,‖‖M),利用比较定理和黎卡提方程解的性质,给出了有界解的上界估计式,推广和改进了文[1,2]中的有关结果.     

The origin of the formation of cavities in galvanized coatings

The role of water‐soluble corrosion products on galvanized wires was examined. The samples used were industrial hot‐dip galvanized wires, which were exposed to the open air under all weather conditions for a relatively short time (6 and 12 months), in an urban environment close to the sea. The samples were studied by different methods, i.e. scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and optical microscopy (OM). Several phases were detected because of the galvanization procedure and the steel substrate. Furthermore, phases which were formed as a result of the reaction of zinc with the atmosphere were also detected. These were oxides like ZnO, carbonates like ZnCO₃ and hydrated Zn and Fe sulfates. Their presence influences the corrosion resistance of the wires, which finally, strongly depends on the solubility of the wires in water. The SO₄^2? compounds especially are very soluble and consequently are easily removed from the coating surface, leading to its degradation by the formation of cavities. In any case, their presence, even after a short period of exposure, implies that the coating is highly affected by the atmosphere of the modern city. Copyright © 2006 John Wiley & Sons, Ltd.     

一类非线性常微分方程振荡解的渐近表示

在本文中,我们讨论了非线性常微分方程y"=a0|x|αy3 a1|x|βy2 α2|x|γy α3|x|δ振荡解的渐近表示．在这个方程中将α0,α,α1,β,α2,γ,α3,δ分别换成0,0,6,0,0,0,sgn(x),1就是著名的第一类Painleve方程,而将α0,α,α1,β,α2,γ,α3,δ分别换成2,0,0,0,sgn(x),1,α0,就是著名的第二类Painleve方程．当α0,α,α1,β,α2,γ,α3,δ分别换成-β/3γ,0,0,0,1/γ,1,α,0时,可用于组合KdV方程孤立子解的化简．     

Differential algebraic equations with after-effect

In this paper, we are concerned with the solution of delay differential algebraic equations. These are differential algebraic equations with after-effect, or constrained delay differential equations. The general semi-explicit form of the problem consists of a set of delay differential equations combined with a set of constraints that may involve retarded arguments. Even simply stated problems of this type can give rise to difficult analytical and numerical problems. The more tractable examples can be shown to be equivalent to systems of delay or neutral delay differential equations. Our purpose is to highlight some of the complexities and obstacles that can arise when solving these problems, and to indicate problems that require further research.     

Absorption Complex between Porphyrin and Phenothiazine in Reverse Micelles

Porphyrin derivatives attract much more interest in photodynamic therapy (PDT). Their importance as therapeutic drugs and targeting agents has been widely recognized1, and many of the efforts have been put towards crafting new porphyrin-based molecular entities to achieve enhanced tumor localization, better tissue penetration and increased singlet oxygen quantum yield2. The states of porphyrins in tissue models such as micelles, lipid bilayers are extensively investigated focusing more or l…     

A telescope illumination system for a wide-field endoscope

Endoscopic illumination systems conduct light down a built-in fibre-optic bundle to illuminate the object. Many modern endoscopes employ wide-field imaging optical systems and therefore require an illuminating beam of large divergence. This is commonly provided by placing a strong diverging lens at the far end of the fibre bundle, but it results in a poor uniformity of illumination in the object space. This paper describes the design of a telescopic illumination system to overcome this problem.     

The Center Problem for a Linear Center Perturbed by Homogeneous Polynomials

The centers of the polynomial differential systems with homogeneous polynomials have been studied for the degrees s = 2, 3, 4, 5. for s = 2, 3, and partially classified for s = 4, 5. In this paper we recall and we give new centers for s = 6, 7 a linear center perturbed by They are completely classified these results for s = 2, 3, 4, 5,     

Simultaneous Measurement of Particle Size and Particle Velocity by the Spatial Filtering Technique

The objective of this study was to compare the measuring results of a fiber‐optical probe based on a modified spatial filtering technique with given size distributions of different test powders and also with particle velocity values of laser Doppler measurements. Fiber‐optical spatial filtering velocimetry was modified by fiber‐optical spot scanning in order to determine simultaneously the size and the velocity of particles. The fiber‐optical probe system can be used as an in‐line measuring device for sizing of particles in different technical applications. Spherical test particles were narrow‐sized glass beads in the range 30–100 μm and irregularly shaped test particles were limestone particles in the range 10–600 μm. Particles were dispersed by a brush disperser and the measurements were carried out at a fixed position in a free particle‐laden air stream. Owing to the measurement of chord lengths and to the influence of diffraction and divergent angle, the probe results show differences from the given test particle sizes. Owing to the particle‐probe collisions, the mean velocity determined by the probe is smaller than the laser Doppler mean velocity.     

Game of two cars: Case of variable speed

A stochastic version of Isaacs's (Ref. 1) game of two cars is dealt with here. In this version, the pursuer, owing to thrust and drag forces, has a variable speed, whereas the evader's speed is constant. Also, the pursuer can maneuver as long as his speed is bounded by some lower and upper limits. The probability of interception, corresponding to optimal (saddle-point) feedback strategies, is computed and serves as a reference for evaluating the performance of four different versions of the proportional navigation pursuit law as well as two other strategies.     

Microperforated insertion units: An alternative strategy to design microperforated panels

Microperforated panels (MPPs) coupled to a rigid wall have been proposed recently as an alternative to porous absorbers in situations having concerns with bacterial contamination and small particles discharge, like food, pharmaceutical and microelectronic industries. There exists also an increasing interest for MPP absorbers in the transportation industry and civil engineering. In general, an optimally designed MPP with good broadband absorption requires many submillimetric holes distributed over a panel of also submillimetric thickness. Such thin plates or foils become so fragile that they need to be protected from mechanical damage. In this paper, an alternative strategy is investigated which allows the design of MPPs with panels of millimetric thickness while maintaining their acoustic performance. These absorbers, named microperforated insertion units (MIUs), avoid the structural problems of the classical MPPs. An assessment of the sound absorption properties of these structures is presented. Comparisons between calculations and measurements are also made under two experimental conditions: plane waves at normal incidence (impedance tube) and free field (anechoic room).