In Vitro and In Vivo Human Body Odor Analysis Method Using GO:PANI/ZNRs/ZIF−8 Adsorbent Followed by GC/MS

Among various volatile organic compounds (VOCs) emitted from human skin, trans-2-nonenal, benzothiazole, hexyl salicylate, α-hexyl cinnamaldehyde, and isopropyl palmitate are key indicators associated with the degrees of aging. In our study, extraction and determination methods of human body odor are newly developed using headspace-in needle microextraction (HS-INME). The adsorbent was synthesized with graphene oxide:polyaniline/zinc nanorods/zeolitic imidazolate framework-8 (GO:PANI/ZNRs/ZIF−8). Then, a wire coated with the adsorbent was placed into the adsorption kit to be directly exposed to human skin as in vivo sampling and inserted into the needle so that it was able to be desorbed at the GC injector. The adsorption kit was made in-house with a 3D printer. For the in vitro method, the wire coated with the adsorbent was inserted into the needle and exposed to the headspace of the vial. When a cotton T-shirt containing body odor was transferred to a vial, the headspace of the vial was saturated with body odor VOCs. After volatile organic compounds were adsorbed in the dynamic mode, the needle was transferred to the injector for analysis of the volatile organic compounds by gas chromatography/mass spectrometry (GC/MS). The conditions of adsorbent fabrication and extraction for body odor compounds were optimized by response surface methodology (RSM). In conclusion, it was able to synthesize GO:PANI/ZNRs/ZIF−8 at the optimal condition and applicable to both in vivo and in vitro methods for body odor VOCs analysis.     

Single-Stage Extraction and Separation of Co2+ from Ni2+ Using Ionic Liquid of [C4H9NH3][Cyanex 272]

The purpose of this study was to optimize the extraction conditions for separating Co²⁺ from Ni²⁺ using N-butylamine phosphinate ionic liquid of [C₄H₉NH₃][Cyanex 272]. A Box–Behnken design of response surface methodology was used to analyze the effects of the initial pH, extraction time, and extraction temperature on the separation factor of Co²⁺ from sulfuric acid solution containing Ni²⁺. The concentrations of Co²⁺ and Ni²⁺ in an aqueous solution were determined using inductively coupled plasma-optical emission spectrometry. The optimized extraction conditions were as follows: an initial pH of 3.7, an extraction time of 55.8 min, and an extraction temperature of 330.4 K. The separation factor of Co²⁺ from Ni²⁺ under optimized extraction conditions was 66.1, which was very close to the predicted value of 67.2, and the error was 1.7%. The equation for single-stage extraction with high reliability can be used for optimizing the multi-stage extraction process of Co²⁺ from Ni²⁺. The stoichiometry of chemical reaction for ion-exchange extraction was also investigated using the slope method.     

Gold Nanoparticles as Effective ion Traps in Poly(dimethylsiloxane) Cross-Linked by Metal-Ligand Coordination

At this time, the development of advanced elastic dielectric materials for use in organic devices, particularly in organic field-effect transistors, is of considerable interest to the scientific community. In the present work, flexible poly(dimethylsiloxane) (PDMS) specimens cross-linked by means of ZnCl₂-bipyridine coordination with an addition of 0.001 wt. %, 0.0025 wt. %, 0.005 wt. %, 0.04 wt. %, 0.2 wt. %, and 0.4 wt. % of gold nanoparticles (AuNPs) were prepared in order to understand the effect of AuNPs on the electrical properties of the composite materials formed. The broadband dielectric spectroscopy measurements revealed one order of magnitude decrease in loss tangent, compared to the coordinated system, upon an introduction of 0.001 wt. % of AuNPs into the polymeric matrix. An introduction of AuNPs causes damping of conductivity within the low-temperature range investigated. These effects can be explained as a result of trapping the Cl⁻ counter ions by the nanoparticles. The study has shown that even a very low concentration of AuNPs (0.001 wt. %) still brings about effective trapping of Cl⁻ counter anions, therefore improving the dielectric properties of the investigated systems. The modification proposed reveals new perspectives for using AuNPs in polymers cross-linked by metal-ligand coordination systems.     

Applications of Titanium Dioxide Nanostructure in Stomatology

Breakthroughs in the field of nanotechnology, especially in nanochemistry and nanofabrication technologies, have been attracting much attention, and various nanomaterials have recently been developed for biomedical applications. Among these nanomaterials, nanoscale titanium dioxide (nano-TiO₂) has been widely valued in stomatology due to the fact of its excellent biocompatibility, antibacterial activity, and photocatalytic activity as well as its potential use for applications such as dental implant surface modification, tissue engineering and regenerative medicine, drug delivery carrier, dental material additives, and oral tumor diagnosis and treatment. However, the biosafety of nano-TiO₂ is controversial and has become a key constraint in the development of nano-TiO₂ applications in stomatology. Therefore, in this review, we summarize recent research regarding the applications of nano-TiO₂ in stomatology, with an emphasis on its performance characteristics in different fields, and evaluations of the biological security of nano-TiO₂ applications. In addition, we discuss the challenges, prospects, and future research directions regarding applications of nano-TiO₂ in stomatology that are significant and worthy of further exploration.     

Nano-Structured Ridged Micro-Filaments (≥100 µm Diameter) Produced Using a Single Step Strategy for Improved Bone Cell Adhesion and Proliferation in Textile Scaffolds

Textile scaffolds that are either 2D or 3D with tunable shapes and pore sizes can be made through textile processing (weaving, knitting, braiding, nonwovens) using microfilaments. However, these filaments lack nano-topographical features to improve bone cell adhesion and proliferation. Moreover, the diameter of such filaments should be higher than that used for classical textiles (10–30 µm) to enable adhesion and the efficient spreading of the osteoblast cell (>30 µm diameter). We report, for the first time, the fabrication of biodegradable nanostructured cylindrical PLLA (poly-L-Lactic acid) microfilaments of diameters 100 µm and 230 µm, using a single step melt-spinning process for straightforward integration of nano-scale ridge-like structures oriented in the fiber length direction. Appropriate drawing speed and temperature used during the filament spinning allowed for the creation of instabilities giving rise to nanofibrillar ridges, as observed by AFM (Atomic Force Microscopy). These micro-filaments were hydrophobic, and had reduced crystallinity and mechanical strength, but could still be processed into 2D/3D textile scaffolds of various shapes. Biological tests carried out on the woven scaffolds made from these nano-structured micro filaments showed excellent human bone cell MG 63 adhesion and proliferation, better than on smooth 30 µm- diameter fibers. Elongated filopodia of the osteoblast, intimately anchored to the nano-structured filaments, was observed. The filaments also induced in vitro osteogenic expression, as shown by the expression of osteocalcin and bone sialoprotein after 21 days of culture. This work deals with the fabrication of a new generation of nano-structured micro-filament for use as scaffolds of different shapes suited for bone cell engineering.     

LBO晶体超光滑表面抛光机理

胶体SiO2抛光LBO晶体获得无损伤的超光滑表面,结合前人对抛光机理的认识,探讨了超光滑表面抛光的材料去除机理,分析了化学机械抛光中的原子级材料去除机理.在此基础上,对胶体SiO2抛光LBO晶体表面材料去除机理和超光滑表面的形成进行了详细的描述,研究抛光液的pH值与材料去除率和表面粗糙度的关系.LBO晶体超光滑表面抛光的材料去除机理是抛光液与晶体表面的活泼原子层发生化学反应形成过渡的软质层,软质层在磨料和抛光盘的作用下很容易被无损伤的去除.酸性条件下,随抛光液pH值的减小抛光材料的去除率增大;抛光液pH值为4时,获得最好的表面粗糙度.     

陶瓷材料疏水性能的研究进展

本文简述了疏水性表面的基本原理,分别从低表面能物质修饰和表面微细粗糙结构的构建两个方面,对疏水性陶瓷材料的制备技术和最新的成果进行了总结,介绍了其潜在的应用并对未来的研究方向作了展望.     

6H-SiC衬底片的表面处理

相比于蓝宝石,6H-SiC是制作GaN高功率器件更有前途的衬底.本文研究了表面处理如研磨、化学机械抛光对6H-SiC衬底表面特性的影响.用显微镜、原子力显微镜、拉曼光谱、卢瑟福背散射谱表征了衬底表面.结果表明经过两步化学机械抛光后提高了表面质量.经第二步化学机械抛光后的衬底具有优异的表面形貌、高透射率和极小的损伤层,其表面粗糙度RMS是0.12nm.在该衬底上用MOCVD方法长出了高质量的GaN外延膜.     

不同晶形纳米碳酸钙的制备及其表面改性研究进展

本文综述了不同晶形纳米碳酸钙的制备方法、纳米碳酸钙表面改性技术的研究现状以及表面改性方法,分析了目前纳米碳酸钙制备及表面改性技术存在的问题,并对其发展前景作了展望.     

Effect of Erosive Agents on Surface Characteristics of Nano-Fluorapatite Ceramic: An In-Vitro Study

Erosive beverages cause dissolution of natural teeth and intra-oral restorations, resulting in surface characteristic changes, particularly roughness and degradation. The purpose of this study was to evaluate the surface roughness and topography of a dental ceramic following immersion in locally available erosive solutions. A total of 160 disc specimens of a nano-fluorapatite type ceramic (12 mm diameter and 2 mm thickness) were fabricated and equally distributed into two groups (n = 80) and then evenly distributed among the following five testing groups (n = 16): lemon juice, citrate buffer solution, 4% acetic acid, soft cola drink, and distilled water which served as a control. The surface roughness (Ra) and topography were evaluated using a profilometer and scanning electron microscope at baseline, 24 h, 96 h, and 168 h respectively. Data were analyzed using ANOVA and Tukey’s multiple comparisons (p ≤ 0.05). Surface changes were observed upon exposure to all acidic beverages except distilled water. Amongst all immersion media, 4% acetic acid produced the most severe surface roughness across all time periods (i.e., baseline, 24 h, 96 h, and 168 h). A statistically significant difference in the surface roughness values between all immersion media and across all four time intervals was observed. Erosive agents had a negative effect on the surface roughness and topography of the tested ceramic. The surface roughness increased with increased storage time intervals.