Ionic conductivity in three crystalline phases of LiBH4 under pressure

The AC electrical conductivity of LiBH₄ was investigated below 2 GPa between 1 Hz and 1.6 MHz. The high-temperature phase has an ionic conductivity of up to 0.01 S cm^?1, while the low-temperature phases have conductivities two orders of magnitude lower. All phases show an Arrhenius behaviour with activation energies E _a between 0.5 and 0.7 eV, in good agreement with earlier data except for phase III, which is found to have the highest activation energy of the phases studied. The high-temperature phase has a minimum in E _a near 1 GPa, close to the triple point, correlated with a sudden change in activation volume. These features may indicate an isostructural phase transition. The conductivities of the ambient temperature phases increase temporarily by an order of magnitude after transitions between these phases, probably due to new diffusion channels via structural defects. The phase diagram agrees well with earlier results.     

Critical behaviour of the smectic A*–C* phase transition and electroclinic effect of ferroelectric liquid crystals with terphenyl rigid core

The SmA*–SmC* phase transition was studied by measuring the temperature and electric field dependences of the optical tilt angle, the electric polarisation and the dielectric spectra collected in a wide frequency range. Critical behaviour of the phase transition was analysed by varying the length of the fluorinated part of the alkyl terminal chain and by differing fluorine substitution in the terphenyl core. Both tilt and polarisation show tricritical mean-field behaviour for all homologues with n?>?2. Almost all coefficients that describe the SmA*–SmC* transition in the frame of the Landau theory were derived for homologue series. Double fluorine substitution in the central ring of the core seems to promote the ‘de Vries'-type smectic A*–C* phase transition with a little layer shrinkage. These well correspond with the lower tilt angle and smaller changes of the birefringence at the phase transition compared to the other homologues.     

Elastic,impedance spectroscopic and dielectric properties of TiO2 doped nanocrystalline NiCuZn spinel ferrites

ABSTRACT

Nanocrystalline Ni_0.4Cu_0.3Zn_0.3Fe₂O₄ ferrites doped with TiO₂ (0–10?wt %) were prepared by the sol-gel method. Elastic properties of synthesized samples were studied with the help of ultrasonic pulse transmission method. The elastic constants initially increase with an increase in TiO₂ up to 1?wt % and then decline. LCR-Q meter was used to study the dielectric properties within 50?Hz to 5?MHz range of the frequency. The dielectric constant (?′) and dielectric loss tangents were decreased continuously with increased frequency for all the selected samples at room temperature revealing normal dielectric behavior of ferrites. Also, the AC conductivity was increased with an increase in the frequency for all the selected samples. Cole-Cole plots were obtained for all investigated samples and showed single semicircle which indicates that the electrical conduction process appears only due to grain boundaries.     

Defects,phase transitions and dynamical disorder in superionic protonic conductors H3OUO2PO4 · 3H2O and CsHSO4

Specific properties of the hydrogen bond and protons appear to be responsible for the formation of the quasi-liquid state of conducting ions and the resulting superionic behaviour. This state is reached by successive phase transitions involving the mobile species and their interactions with a more or less rigid framework. H₃OUO₂PO₄ · 3H₂O (HUP) and CsHSO₄ can be considered as models of wet and dry superionic conduction, respectively. Interactions between static effects and dynamical disorder as well as the coupling between sublattices are discussed in relation to results obtained by calorimetry, impedance spectroscopy (up to 10 GHz), vibrational spectroscopy and quasi-elastic neutron scattering.     

Dielectric and structural relaxation phenomena in Na0.5Bi0.5TiO3 single crystal

Abstract

Dielectric permittivity studies of Na_0.5Bi_0.5TiO₃ single crystals in a broad range of frequency up to 10 MHz and temperature 300—823 K are reported. In this temperature range dielectric dispersion below 1 MHz has been found. The obtained data were fitted to the Cole-Cole relation. The mean relaxation time τ is strongly temperature dependent (0.04 ? 2.6 × 10^?5 s). A remarkable hysteresis effect in the values of τ on cooling and heating took place. The Δε(T) dependence (the maximal value of Δε ～ 400) is similar to the global ε′(T) response at low frequency. An isothermal structural transformation in Na_0.5Bi_0.5TiO₃ was observed by X-ray measurements. The order of the time in which the transformation takes place (～300 minutes) corresponds to the time in which the strongest time evolution of electric permittivity and time changes of dielectric dispersion were detected.     

Second-order properties of the loss probability inM/M/s/s +c systems

The Erlang loss function, which gives the steady state loss probability in anM/M/s/s system, has been extensively studied in the literature. In this paper, we look at the similar loss probability inM/M/s/s + c systems and an extension of it to nonintegral number of servers and queue capacity. We study its monotonicity properties. We show that the loss probability is convex in the queue capacity, and that it is convex in the traffic intensity if is below some ^* and concave if is greater that ^*, for a broad range of number of servers and queue capacities. We prove that the one-server loss system is the onlyM/M/s/s +c system for which the loss probability is concave in the traffic intensity in all its range.Research supported by Grant BD/645/90-RM from Junta Nacional de Investigação Científica e Tecnológica.On leave from: Departamento de Matemática, Instituto Superior Técnico, Av. Rovisco Pais, 1096 Lisboa Codex, Portugal.     

Evaluation of Charged Defect Energy in Two-Dimensional Semiconductors for Nanoelectronics: The WLZ Extrapolation Method

Defects play a central role in controlling the electronic properties of two-dimensional (2D) materials and realizing the industrialization of 2D electronics. However, the evaluation of charged defects in 2D materials within first-principles calculation is very challenging and has triggered a recent development of the WLZ (Wang, Li, Zhang) extrapolation method. This method lays the foundation of the theoretical evaluation of energies of charged defects in 2D materials within the first-principles framework. Herein, the vital role of defects for advancing 2D electronics is discussed, followed by an introduction of the fundamentals of the WLZ extrapolation method. The ionization energies (IEs) obtained by this method for defects in various 2D semiconductors are then reviewed and summarized. Finally, the unique defect physics in 2D dimensions including the dielectric environment effects, defect ionization process, and carrier transport mechanism captured with the WLZ extrapolation method are presented. As an efficient and reasonable evaluation of charged defects in 2D materials for nanoelectronics and other emerging applications, this work can be of benefit to the community.     

小孔流速实验中的排水时间和流量系数的研究

本文以水作为理想流体,考虑到水头损失和孔口缩流效应,对小孔流速实验涉及的容器排水问题进行了系统的理论和实验研究.从理论上推导得出了圆柱形容器排水时间的解析解,分析了排水时间和自由液面速度、流量系数之间的规律,提出了排水时间的等效性.实验上,加工了底部开有不同小孔的大型圆柱形容器,测量了容器排水时间随液面高度的变化关系,借助实验结果计算了流量系数值,验证了容器排水时间的等效性关系,实验结果与理论计算符合较好.     

A dielectric rod waveguide coupled with metal rectangular waveguide

Measurements have been done in the millimeter wave region on a composite waveguide which comprises a dielectric rod waveguide connecting two metal rectangular waveguides. Such a waveguide has been used by us in a Josephson harmonic mixer installed in a small metal cryostat, to prevent the thermal invasion from outside environment and to transmit both signal and LO waves with small losses. The measured transmission loss, that is caused mainly by the coupling loss between metal rectangular waveguides (TE₁₀ mode) and a dielectric rod waveguide (HE₁₁ mode), has been less than 2dB in the frequency range of 52–104 GHz.     

Power handling capability of dielectric-coated,metallic, hollow waveguides for CO2 laser light

A theoretical analysis has been carried out to evaluate the power handling capability of hollow waveguides for CO₂ laser light. Dielectric-coated metallic waveguides are shown to transmit much higher powers than conventional metallic waveguides.