Dielectric loss of half-doped manganite Lao.sCao.sMnO3＊

The dielectric loss tanfi of half-doped manganite Lao.sCao.sMnO3 is investigated using Green＇s function technique. The Lao.sCao.sMnO3 is described by the Kondo-lattice model in the double exchange limit, taking into account the Jahn- Teller distortion and the super-exchange interaction between the localized electrons. It is found that the intensity of tans decreases with increasing [e]TI, V, and U. It is also observed that the transition temperature Tp rises as l eJTI and U increase. It is worth noting that Tp remains unchanged and the strength of tans increases with increasing g. The calculated dielectric loss results are explained theoretically, and these behaviors are in qualitative agreement with the experimental results.     

Interfacial characteristics of Al/Al2O3/ZnO/n-GaAs MOS capacitor

The interfacial characteristics of Al/Al2O3/ZnO/n-GaAs metal-oxide-semiconductor (MOS) capacitor are investigated. The results measured by X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM) show that the presence of ZnO can effectively suppress the formations of oxides at the interface between the GaAs and gate dielectric and gain smooth interface. The ZnO-passivated GaAs MOS capacitor exhibits a very small hysteresis and frequency dispersion. Using the Terman method, the interface trap density is extracted from C-V curves. It is found that the ZnO layer can effectively improve the interface quality.     

The Role of a Specific Response of Media in the Vavilov-Cherenkov Effect

It is shown that the condition υ > υ_p (ω), which is necessary in order to trigger the Vavilov-Cherenkov effect, determines the interval of radiated frequencies and it alone cannot establish a strong restriction to the velocity of the particle. It is exhibited that it is possible to define a general lower bound for the velocity of the particle, which does not depend on the frequency when both, a specific response of the medium is taken into account and the mentioned condition is considered. The minimum value of the phase velocity of light in the medium determines the existence of such general lower bound.     

Analysis method of the effect of fabrication errors on a planar waveguide demultiplexer

The impact of fabrication errors on a planar waveguide demultiplexer is analyzed based on an analytical method. The explicit expression of the transfer function taking into account phase and amplitude errors is presented in order to analyze the loss and crosstalk of the demultiplexer caused by fabrication errors. A basic requirement for the demultiplexer with a certain crosstalk criterion can be easily obtained. Using an etched diffraction grating demultiplexer as an example, it is shown that the analytical results have a good agreement with results from a numerical method.     

Investigation of proton channeling using nuclear-reaction resonances

To investigate orientation effects, an approach based on the measurements of γ-ray yields following the excitation of “narrow" isolated resonances in the reactions occurring on the nuclei of interstitial impurity atoms, that occupy certain positions in a crystal, has been proposed. The carbon atoms were shown to be located in octahedral interstitial sites of the Re-0.4 at. % ¹³C monocrystalline solution. The proton flux distribution in the (0001) channel was investigated via the 1.7476 MeV resonance of the ¹³C(p,γ)¹⁴N reaction. Some particular qualities of the reaction yield were found to be dependent upon the proton energy. The method of measurement of the electronic stopping power of channeled particles has been deduced. The γ-ray yield of the resonance reactions induced by the channeled protons was shown to be dependent on the amplitude of the thermal vibrations of carbon atoms.     

Low temperature adsorption of oxygen on reduced V2O3(0 0 0 1) surfaces

Well ordered V₂O₃(0 0 0 1) films were prepared on Au(1 1 1) and W(1 1 0) substrates. These films are terminated by a layer of vanadyl groups under typical UHV conditions. Reduction by electron bombardment may remove the oxygen atoms of the vanadyl layer, leading to a surface terminated by vanadium atoms. The interaction of oxygen with the reduced V₂O₃(0 0 0 1) surface has been studied in the temperature range from 80 to 610 K. Thermal desorption spectroscopy (TDS), infrared reflection absorption spectroscopy (IRAS), high resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) were used to study the adsorbed oxygen species. Low temperature adsorption of oxygen on reduced V₂O₃(0 0 0 1) occurs both dissociatively and molecularly. At 90 K a negatively charged molecular oxygen species is observed. Upon annealing the adsorbed oxygen species dissociates, re-oxidizing the reduced surface by the formation of vanadyl species. Density functional theory was employed to calculate the structure and the vibrational frequencies of the O₂ species on the surface. Using both cluster and periodic models, the surface species could be identified as η²-peroxo () lying flat on surface, bonded to the surface vanadium atoms. Although the O-O vibrational normal mode involves motions almost parallel to the surface, it can be detected by infrared spectroscopy because it is connected with a change of the dipole moment perpendicular to the surface.     

The interplay between molecular orientation, film morphology and luminescence properties of tetracene thin films on epitaxial AlOx/Ni3Al(1 1 1)

We report a systematic study of the interplay between molecular orientation, film morphology and luminescence properties of tetracene thin films on epitaxial alumina films on Ni₃Al(1 1 1), employing high resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS), low energy electron diffraction (LEED), and photoluminescence spectroscopy (PL). If deposited at low temperatures, tetracene forms laterally disordered and compact films in which at least the first monolayer is oriented parallel to the substrate. For thicknesses in the range of 10 Å or below, these as-deposited films show no luminescence, while thicker films exhibit weak luminescence from higher layers. On annealing to 210 K, tetracene films dewet the AlO_x/Ni₃Al(1 1 1) surface and transform into an island morphology. At the same time, molecules tend to re-orient into a more upright configuration. In this island configuration, even thin films show luminescence. We can thus conclude that in spite of the insulating nature of the surface, the interaction of flat-lying tetracene molecules with AlO_x/Ni₃Al(1 1 1) is strong enough to provide at least one efficient non-radiative decay channel.     

Kinetics of residual gas adsorption on Ge(1 1 1) surface in low-energy electron backscattering

Low-energy (0.4-1.2 eV) electron backscattering is applied for the investigation of kinetics of residual gas adsorption effect on the concentration and energy positions of surface electron states of Ge(1 1 1) surface. Chemosorption of residual gas molecules on Ge(1 1 1) at P ∼ 10⁻⁷ Pa and room temperature is shown to be most active during the first 48 h. Low concentration of dangling valence bonds on the reconstructed Ge(1 1 1) (2 × 8) surface is shown to determine its low activity to chemosorption.     

Design considerations of depressed clad W-shaped single mode dispersion compensating fibers

Dispersion compensating fibers (DCFs) are being widely used as dispersion compensation techniques because of its superior characteristics. This work reports the theoretical modelling of a single mode DCF having W-shaped shallow as well as deeply depressed clad profile. The DCFs have been designed and optimized by suitable adjusting different fiber parameters such as, central relative index difference (Δ⁺), inner core radius (a), depression depth parameter (ρ), normalized end position of the depressed clad (p), etc. at a given spot size . The figure of merit (FOM) characteristics including the bend loss as well as other losses associated with fiber manufacturing technique have been thoroughly investigated. Performances of these DCFs for recent wavelength division multiplexing (WDM) transmission system have also been discussed. By adjusting different fiber parameters, the effective core area (A_eff) of the above DCFs can be controlled to minimize the effect of non-linearities on them.     

Use of Cu dopant and it's doping effects on polyaniline conducting system in water and tetrahydrofuran

The structural modification and properties of polymeric materials are of utmost importance in deciding their applications. In the present study, the synthesis of polyaniline (PANI) has been carried out via chemical oxidation in acidic medium by potassium-dichromate and the yield of synthesized polyaniline was found to be 75-80%. The copper per chlorate tetrabenzonitrile salt (CuClO₄·4BN) used for chemical doping in synthesized polyaniline is stable in organic solvent like acetonitrile (AN) and benzonitrile (BN). The effect of Cu⁺¹ oxidation state (dopant) in polyaniline has been characterized by FTIR. Electrical and dielectric measurements show the decrease in the intensity of the Cu⁺¹ salt signal and the appearance of a radical signal due to the formation of oxidative coupled in polymeric species. Electrical and dielectric properties of doped polyaniline samples show significant changes due to the effect of dopant (CuClO₄·4BN). It is observed that the conductivity is contributing both by formation of ionic complex and particularly dominated by electronic due to the mobility of charge carriers along the polyaniline chain.