影响DPF焦点装置中子稳定性的因素和改进措施

简要叙述了稠密等离子体聚焦装置作为中子发生器的工作原理，对影响稠密等离子体聚焦装置放电出中子产额及其稳定性的一些因素和改进措施进行了简单讨论．通过使用不同电极形状的场畸变开关很好地提高了焦点装置的运行，使装置输出中子的起伏得到明显的改善．通过对腔内电极的清洁，在不更换气体的条件下，聚焦装置放电出中子产额稳定.The principle of dense plasma focus(DPF) as neutron generator has been investigated in this paper. We have stated briefly some factors that mainly influnce the DPF s neutron yield and some methods improving the stability of neutron yields on the dense plasma focus. It is showed that the fluctuation of DPF output neutron becomes smaller by using different types of field-distortion elements. Over 100 consecutive shots without purging the test gas the neutron yields has no obvious change.     

Conic Formulation for l p -Norm Optimization

In this paper, we formulate the l _p -norm optimization problem as a conic optimization problem, derive its duality properties (weak duality, zero duality gap, and primal attainment) using standard conic duality and show how it can be solved in polynomial time applying the framework of interior-point algorithms based on self-concordant barriers.     

Search for deconfinement in NA49 at the CERN SPS

Experiment NA49 at the CERN SPS uses a large acceptance detector for a systematic study of particle yields and correlations in nucleus-nucleus, nucleon-nucleus and nucleon-nucleon collisions. Preliminary results for Pb+Pb collisions at 40, 80 and 158 A⋅GeV beam energy shown and compared to measurements at lower and higher energies.     

Solid phase extraction for analysis of biogenic carbonates by electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS): an investigation of rare earth element signatures in otolith microchemistry

Uptake of trace elements into fish otoliths is governed by several factors such as life histories and environment in addition to stock and species differences. In an attempt to elucidate the elemental signatures of rare earth elements (REEs) in otoliths, a solid phase extraction (SPE) protocol was used in combination with electrothermal vaporization (ETV) as a sample introduction procedure for the determinations by inductively coupled plasma quadrupole mass spectrometry (ICP-MS). Effects of various parameters, such as carrier gas flow rate, atomization temperature and chemical modification, were examined for optimization of the conditions by ETV-ICP-MS. Atomization was achieved at 2800 °C. Lower temperatures (i.e. 2600 °C) resulted in severe memory problems due to incomplete atomization. Palladium was used as a chemical modifier. It was found that an increase in Pd concentration up to 0.5 μg in the injection volume (70 μl) led up to four-fold enhancement in the integrated signals. This phenomenon is attributed to the carrier effect of Pd rather than the stabilization since no significant losses were observed for high temperature drying around 700 °C even in the absence of Pd. Preconcentration was performed on-line at pH 5 by using a mini-column of Toyopearl AF-Chelate 650M chelating resin, which also eliminated the calcium matrix of otolith solutions. After preconcentration of 6.4 ml of solution, the concentrate was collected in 0.65 ml of 0.5% (v/v) HNO₃ in autosampler cups, and then analyzed by ETV-ICP-MS. The method was validated with the analysis of a fish otolith certified reference material (CRM) of emperor snapper, and then applied to samples. Results obtained from otoliths of fish captured in the same habitat indicated that otolith rare earth element concentrations are more dependent on environmental conditions of the habitat than on species differences.     

A boundary element method for the calculation of noise barrier insertion loss in the presence of atmospheric turbulence

Atmospheric turbulence is an important factor that limits the amount of attenuation a barrier can provide in the outdoor environment. It is therefore important to develop a reliable method to predict its effect on barrier performance. The boundary element method (BEM) has been shown to be a very effective technique for predicting barrier insertion loss in the absence of turbulence. This paper develops a simple and efficient modification of the BEM formulation to predict the insertion loss of a barrier in the presence of atmospheric turbulence. The modification is based on two alternative methods: (1) random realisations of log-amplitude and phase fluctuations of boundary sources and (2) de-correlation of source coherence using the mutual coherence function (MCF). An investigation into the behaviours of these two methods is carried out and simplified forms of the methods developed. Some systematic differences between the predictions from the methods are found. When incorporated into the BEM formulation, the method of random realisations and the method of MCF de-correlation provide predictions that agree well with predictions by the parabolic equation method and by the scattering cross-section method on a variety of thin barrier configurations.     

障碍平方期权的定价

本讨论了一种变异期权——收益结构为平方的障碍期权，在股票价格服从几何布朗运动的模型下，由带单侧吸收壁的布朗运动的密度和分布函数得到连续障碍平方期权的定价公式．     

Application of Pulsed Traveling Hydrogen Arcs for Metal Oxide Reduction

A plasma reactor that has a transient traveling arc has been used to study hydrogen in relation to in-flight reduction of metal oxide particles. Experiments were done to determine the nature of the arc and its interaction with the reactor gas. The lifetime of the excited atomic hydrogen was measured and it was found to be more than 4 ms after the arc had ceased. Powders and tablets of oxides were exposed to the pulsed-arc treated hydrogen and found to react much more rapidly and intensely than when exposed to hot molecular hydrogen. The results suggest that atomic hydrogen will exist throughout the volume of such a reactor for a period that is sufficient to reduce particles of FeO, Cr₂O₃, and TiO₂.     

On the role of the interface charge in non-ideal metal–semiconductor contacts

The bias dependent interface charge is considered as the origin of the observed non-ideality in current–voltage and capacitance–voltage characteristics. Using the simplified model for the interface electronic structure based on defects interacting with the continuum of interface states, the microscopic origin of empirical parameters describing the bias dependent interface charge function is investigated. The results show that in non-ideal metal–semiconductor contacts the interface charge function depends on the interface disorder parameter, density of defects, barrier pinning parameter and the effective gap center. The theoretical predictions are tested against several sets of published experimental data on bias dependent ideality factor and excess capacitance in various metal–semicoductor systems.     

Polarization modification of PZT thin films by means of electric fields and stress in scanning force microscopy

Polarization switching in scanning force microscopy (SFM) is influenced by both electric fields and stress, whereby the latter can arise inherently from Maxwell stress. We discuss the influence of electric charges and of the polarization asymmetry on the switching behaviour. For single crystallites of PZT(53/47) thin films, the sectors for ferroelectric, ferroelastoelectric and ferroelastic switching are represented in a field-stress map. The influence of stress on the second harmonic of the SFM is also discussed.     

激光溅射Ni等离子体与气相CH3OH团簇的反应

用激光溅射 分子束技术研究了气相中Ni的等离子体与甲醇分子团簇的反应 .观察到Ni+ (CH3 OH) n、NiO+ (CH3 OH) n、H+ (CH3 OH) n、H3 O+ (CH3 OH) n 四个种类的团簇正离子和CH3 O-(CH3 OH) n(n≤ 2 5 )一种团簇负离子 .详细考察了激光烧蚀等离子体作用于脉冲分子束的不同位置时 ,对团簇产物种类和团簇尺寸大小的影响 .发现NiO+ (CH3 OH) n 是由Ni+ (CH3 OH) n 团簇内的脱甲烷反应生成的 ,而H+ (CH3 OH) n、H3 O+ (CH3 OH) n主要是激光等离子体中的电子与甲醇团簇碰撞电离产生的