全固态多波长飞秒脉冲激光系统

利用棱镜对引进频谱空间啁啾来补偿飞秒脉冲激光二次谐波产生中的相位失配,提高了倍频效率建立了一套全固态、多波长(1065nm, 532nm,823.1nm, 402nm)飞秒脉冲激光系统自制的Nd:YVO4激光器输出532nm绿光激光,最高平均功率可达5.6W当用2.5W绿光激光泵浦时,从自制的钛宝石激光器及经BBO倍频可分别输出中心波长为823.1nm和402nm,平均功率300mW和73mW,谱宽32.3nm和5.1nm,脉宽22fs和33.3fs、重复率108MHz的近红外和蓝光激光整个系统具有结构紧凑、倍频效率高、运行稳定的特点.     

BELENE nuclear power plant numerical and experimental bedrock,layers and surface signals

An investigation of BELENE Nuclear Power Plant (NPP) free field signal is presented in the current study. An SH wave propagation trough multilayer geological media in the region is considered. An original structural model of the geological column has been developed. The investigated layers are isotropic, with constant depth and skyline parallel. The SH rays are with an arbitrary angle as far as the layers are concerned. The seismic SH waves have been generated by a special detonation device. The main results of the study are graphically illustrated. A comparison between the original BELENE NPP experimental and the numerical surface (free field) signals (obtained by the formulated direct problem) for the investigated geological column has been carried out and its results are hereby shown.     

Estimating Invariant Probability Densities for Dynamical Systems

Knowing a probability density (ideally, an invariant density) for the trajectories of a dynamical system allows many significant estimates to be made, from the well-known dynamical invariants such as Lyapunov exponents and mutual information to conditional probabilities which are potentially more suitable for prediction than the single number produced by most predictors. Densities on typical attractors have properties, such as singularity with respect to Lebesgue measure, which make standard density estimators less useful than one would hope. In this paper we present a new method of estimating densities which can smooth in a way that tends to preserve fractal structure down to some level, and that also maintains invariance. We demonstrate with applications to real and artificial data.     

1.5μm波段基于级联二阶非线性的铌酸锂光波导全光波长变换的理论分析

研究了基于级联二阶非线性的铌酸锂波导全光波长变换器的特性.首先从耦合模方程出发,比较了数值分析结果与小信号近似分析的结果.其次在数值分析基础上,分析了铌酸锂晶体的温度变化导致相应基频光波波长与极化反转光栅周期的变化关系.最后分析了在不同相互作用长度下,转换的光波功率与有效基频光波波长带宽、温度调谐带宽、极化反转光栅周期带宽等关系,以对全光波长变换器件进行优化设计 关键词： 级联二阶非线性 波长变换 准位相匹配 铌酸锂光波导     

Molecular dynamics simulations on the structures and properties of ε-CL-20-based PBXs ——Primary theoretical studies on HEDM formulation design

Five polymer bonded explosives (PBXs) with the base explosive ε-CL-20 (hexanitrohexaazaisowurtzi- tane), the most important high energy density compound (HEDC), and five polymer binders (Estane 5703, GAP, HTPB, PEG, and F2314) were constructed. Molecular dynamics (MD) method was employed to investigate their binding energies (Ebind), compatibility, safety, mechanical properties, and energetic properties. The information and rules were reported for choosing better binders and guiding formula- tion design of high energy density material (HEDM). According to the calculated binding energies, the ordering of compatibility and stability of the five PBXs was predicted as ε-CL-20/PEG > ε-CL-20/ Estane5703 ≈ε-CL-20/GAP > ε-CL-20/HTPB > ε-CL-20/F2314. By pair correlation function g(r) analyses, hydrogen bonds and vdw are found to be the main interactions between the two components. The elasticity and isotropy of PBXs based ε-CL-20 can be obviously improved more than pure ε-CL-20 crystal. It is not by changing the molecular structures of ε-CL-20 for each binder to affect the sensitivity. The safety and energetic properties of these PBXs are mainly influenced by the thermal capability (C°p) and density (ρ) of binders, respectively.     

用力敏传感器测量乙醇水溶液的表面张力系数与浓度的关系

用硅压阻式力敏传感器测量了纯水、乙醇的表面张力系数，并测量了不同浓度的乙醇水溶液的表面张力系数，得到了乙醇水溶液的表面张力系数随浓度的变化曲线．     

Pearson-χ~2距离的若干性质

本文对数理统计中常用的 Pearson- χ2距离的分析特性进行了讨论 ,得到了这一距离的一些解析性质 ,最后我们还给出了几个常用距离的关系 .     

空间非相干多分量光束构成的非相干耦合屏蔽孤子对

两束本身具有空间非相干性的非相干多分量光束可以在光折变介质中形成非相干耦合 屏蔽孤子对，利用相干密度法得到了亮 亮、暗 暗型耦合孤子对的解，并研究了构成 非相干孤子对分量光束的相干组分的传播特性. 关键词： 空间非相干多分量光束 耦合孤子对 相干密度 相干组分     

单粒子势模型下价核子的密度分布

依据实验事实，利用单粒子势模型，计算了一些核态外层价核子的密度分布.计算给出了价核子在核外部分布的概率和贡献，以此作为晕核态的判断标准.通过研究均方根半径随结合能变化的规律，指出了晕核态存在的条件，尤其是质子晕核态存在的条件.这些对判断和寻找晕核态有现实的指导意义. 关键词： 单粒子势模型 价核子 密度分布 中子晕核态 质子晕核态