用于WDM的多重体光栅曝光方法及层状体全息光栅的研究

本文针对层状多重体全息在红外通讯波段分光滤波的应用,分析了其布喇格匹配与衍射效率均匀性问题.给出了在LiNbO3∶Fe光折变晶体中制作层状多重体全息光栅的几种方法.利用双片光干涉在直接分层结构中写入了三层光栅,光栅层厚1 mm,层间距2 mm,每层复用了四个光栅.对这三层光栅的分析测试表明,12个光栅的衍射效率均匀,相邻通道间隔约3 nm.实验结果表明,这种层状结构的多重体全息光栅有希望用来组成具有大量通道数的WDM系统中的复用/解复用器件.     

Numerical Analysis on Transmission Characteristics of a Bragg Grating Assisted Mismatched Fiber Coupler

l IntroductionWavelength-division multiplexing (~) technology is an imPOrtant approach tosatisfy substantial increase of telecommunication network capacity. As one Of keytechnologies used in WDM networks, much progress has been made for wavelengthdivision multipl exing/ demul tip lexing technology thes e years. Based on perfect spectrumcharacteristics of fiber Bragg gratingS and fiber coUPlers, many approaches have beenproPOSed for wavelength-division multiplexing/ de multi pl eXing in a…     

Mode expansion modeling of rectangular integrated optical microresonators

Two dielectric waveguides that are evanescently coupled to a square or rectangular region of increased refractive index can serve as a very compact integrated optical microresonator. We consider these devices in a spatial two-dimensional setting, where a rigorous mode expansion technique enables accurate and quite efficient numerical simulations of these configurations. The paper is concerned with single resonator units as well as with an add-drop filter constructed by cascading two square cavities. Besides calculating the power transmission spectra, we try to document as far as possible the characteristic electric field patterns that occur at major and minor resonance wavelengths. The influence of the various geometrical parameters on the resonator performance is investigated in detail.     

光折变LiNbO_3晶体中单光栅实现波长解复用方案

基于光折变LiNbO3晶体中体光栅的各向异性衍射特性,从理论上分析了利用单个体光栅实现波分解复用技术的方案.在此方案中,采用He-Ne激光束记录一个特定波数的光折变体光栅,就能够实现远程通信波长在1550 nm附近的波长解复用,理论上可以实现的解复用波段范围是从1400 nm到1650 nm.由于采用了各向异性衍射,衍射光和读取光的偏振方向互相正交,提高了信噪比;另外,方案中仅需记录单个光栅就可以实现波分复用,克服了多重光栅复用方案中记录时间复杂性的问题.     

双向使用高非线性光纤实现同时解复用出两路10 Gbit/s信号

提出一种利用双向使用高非线性光纤(HNLF)实现同时解复用出两路信号的全光解复用方案.将复用信号和控制光的混合信号从HNLF的两端同时注入,复用信号中的某一路信号通过交叉相位调制使控制光产生蓝移或红移,在HNLF的输出端用窄带滤波器将控制光的蓝移或红移部分滤出从而同时实现两路信号解复用.理论分析了信号光和控制光在HNLF中的相互作用和解复用原理.搭建80 Gbit/s光时分复用系统,对双向使用HNLF的解复用结构进行了实验研究.在HNLF的两个输出端同时实现不同信道的无误码解复用,其中信道解复用的最大功率代价为2.6 dB.     

基于宽光谱应用的波长解复用多重体光栅的光写入特性

针对光通信中波长覆盖范围日益增宽的特点,从理论上研究了用于宽光谱范围波长解复用器件的多重体光栅的布喇格匹配和各波长对应光栅衍射效率的均匀性.计算及实验结果均表明,由于记录介质的色散效应将导致多重体全息光栅读出过程中明显的布喇格失配,并且在写入过程中获得的均匀折射率调制度的多重体光栅,在读出过程中各通信波长对应光栅的衍射效率将不均匀为此,提出了改进多重体光栅的光写入方法,给出了利用角度复用法写入透射型多重体光栅时解复用波长与写入角度的关系,以及写入体光栅过程中记录介质的折射率调制度修正公式.     

基于SOA全光偏振调制的双信道光传输系统的仿真与分析

仿真并分析了基于半导体光放大器全光偏振调制的双信道光传输系统模型.该系统分别利用两级半导体光放大器的交叉偏振调制效应(XPolM),将两路独立的强度调制的抽运光变换到一路探测光的两个正交的偏振态上,实现双通道偏振复用的全光数据传输.首先对单个半导体光放大器的动力学过程进行了理论分析,数值计算了具有不同抽运光功率的半导体光放大器对探测光偏振态的影响,进而对双半导体光放大器偏振复用系统的调制/解调原理进行了分析,模拟仿真了双半导体光放大器的双通路偏振复用的调制及解调过程,仿真结果与实验结果相符.     

A novel asymmetric arrayed waveguide grating with different lengths of input/output slabs

A novel arrayed waveguide grating (AWG) with asymmetric configuration is proposed. In this configuration, the length of the output slab region, the width and the spacing of the output waveguides are unequal to the corresponding parts of the input ones. Compared to a conventional symmetric AWG, the asymmetric AWG proposed in this paper has a smaller size without degrading its performance The analytic method used in a conventional symmetric AWG is extended to the asymmetric AWG. A design example of an asymmetric AWG with low insertion loss, low channel crosstalk and wide bandwidth is presented.     

用多级台阶量化相位光栅分离偏振光

构造了三角形轮廓多级台阶量化相位光栅模型,用傅里叶光学方法详细推导了光栅衍射场强的解析表达式。分析了这种光栅对偏振光的分离和聚焦特性,并优化设计了两个光栅。数值模拟和分析表明,模型光栅能够将o光和e光分离任意距离,并分别在指定的方向上聚焦。计算结果显示,取8～16个量化级就可以得到较大的衍射效率,两偏振光的能量比较均衡,偏振性能较好;量化级数的进一步增加只是衍射效率有所增加,并不能提高偏振性能。     

带有布喇格光栅的光纤失配耦合器的传输特性分析(英文 )

本文利用模式耦合理论,分析了光纤失配耦合器在耦合区带有一个布喇格光栅后两光纤中基模场的传输特性,得到基模场发生耦合现象的条件及满足的方程． 采用数值分析方法模拟耦合现象,并得出了带有布喇格光栅的光纤耦合器用于波分复用／解复用的最优化设计方案．