A New and Simple Electrocatalyst for Formaldehyde Oxidation; Nickel/poly(o‐Anisidine)/Film Modified Ionic Liquid Carbon Paste Electrode

In present work, the ionic liquid, 1‐butyl‐3‐methylimidazolium bis (trifluoromethylsulfonyl) imide was incorporated in the carbon paste electrode as the binder (IL‐CPE). O‐anisidine (OA) monomer is electropolymerized in the presence of an aqueous acidic solution onto IL‐CPE (POA/IL‐CPE). The as‐prepared substrate is used as a porous matrix for dispersion of Ni(II) ions by immersing the modified electrode in a nickel(II) nitrite solution. The modified electrodes are characterized by scanning electron microscopy (SEM) and electrochemical methods. The POA/IL‐CPE was applied successfully to highly efficient (current density of 18.2 mA cm^?2) electrocatalytic oxidation of formaldehyde in alkaline medium. Finally, the rate constant for chemical reaction between formaldehyde and redox sites of the electrode was calculated.     

Catalytic Oxidative Cyclocondensation of o‐Aminophenols to 2‐Amino‐3H‐phenoxazin‐3‐ones

The catalytic oxidative cyclocondensation of the o‐aminophenols 1a–f was investigated. The oxidants used were air/laccase, H₂O₂/horseradish peroxidase, H₂O₂/ebselen (3), and TBHP/diphenyl diselenide 4. The products obtained were 2‐amino‐3H‐phenoxazin‐3‐one—questiomycin A, its derivative 2b, and cinnabarinic acid and actinocin (2c,d). Substrates with methyl groups at 4 and 5 positions of benzene ring were converted to different dihydrophenoxazinones 2g,h. Compounds having chlorine atoms at the same positions underwent oxidation to planar phenoxa-zinones 2e,f with elimination of one hydrochloride molecule.     

Synthesis of 2,2′‐Bi‐2H‐3,3′‐diaryl‐1,4‐benzothiazines from α,α‐Dibromoacetophenones and o‐Aminothiophenol

Some 2,2′‐bi‐2H‐3,3′‐diaryl‐1,4‐benzothiazines (5a–f) were synthesized from α,α‐dibromoacetophenones and o‐aminothiophenol.     

Dynamic output feedback consensus of continuous‐time networked multiagent systems

This article addresses the dynamic output feedback consensus problem of continuous‐time networked multiagent systems. Both a fixed topology and Markovian switching topologies are considered. The consensus algorithms are on the base of the output information of each agent's itself and its neighbors. Some sufficient conditions for consensus of multiagent systems are obtained in forms of bilinear matrix inequalities. The algorithm based on the homotopy continuation method is given to compute the feasible controller gains. Numerical simulations are given to show the effectiveness of the proposed results. © 2014 Wiley Periodicals, Inc. Complexity 20: 35–42, 2015     

Uniform stabilization to equilibrium of a nonlinear fluid–structure interaction model

We consider uniform stability to a nontrivial equilibrium of a nonlinear fluid–structure interaction (FSI) defined on a two or three dimensional bounded domain. Stabilization is achieved via boundary and/or interior feedback controls implemented on both the fluid and the structure. The interior damping on the fluid combining with the viscosity effect stabilizes the dynamics of fluid. However, this dissipation propagated from the fluid alone is not sufficient to drive uniformly to equilibrium the entire coupled system. Therefore, additional interior damping on the wave component or boundary porous like damping on the interface is considered. A geometric condition on the interface is needed if only boundary damping on the wave is active. The main technical difficulty is the mismatch of regularity of hyperbolic and parabolic component of the coupled system. This is overcome by considering special multipliers constructed from Stokes solvers. The uniform stabilization result obtained in this article is global for the fully coupled FSI model.     

Demulsification Efficiency of Some New Demulsifiers Based on 1,3,5-Triethanolhexahydro-1,3,5-triazine

This study mainly concentrates on the synthesis of three novel demulsifiers and the investigation of their demulsification efficiency. The demulsifiers were derived from 1,3,5-triethanolhexahydro-1,3,5-triazine, which was prepared by the reaction of monoethanol amine with formaldehyde. The 1,3,5-triethanolhexahydro-1,3,5-triazine was ethoxylated by introducing 20 units of ethylene oxide and then esterified at different molar ratios with oleic acid (1, 2, and 3) to give three demulsifiers, namely, E₂₀TO, E₂₀TO₂, and E₂₀TO₃. The chemical structures of the prepared demulsifiers were confirmed by ¹H NMR and FTIR spectrum. The demulsification efficiency of these demulsifiers was tested on the natural water-in-oil (w/o) emulsions (50% water content). From the obtained results, it has been found that the investigated demulsifiers have a great potential to break the w/o emulsions. The trioleat ester (E₂₀TO₃) exhibited the maximum demulsification efficiency (96%) after 120 minutes at 55°C.     

Generation of sub‐terahertz repetition rates from a monolithic self‐mode‐locked laser coupled with an external Fabry‐Perot cavity

A novel scheme to multiply the repetition rate of a monolithic self‐mode‐locked laser for generating sub‐terahertz pulse sources is successfully demonstrated. A coated Yb:KGW crystal is designed to achieve a self‐mode‐locked operation at a repetition rate of 24 GHz with an average output power exceeding 1.0 W at a pump power of 4.8 W. A partially reflective mirror is utilized to combine with the output surface of the gain medium to constitute an external Fabry‐Perot cavity. It is theoretically and experimentally verified that adjusting the external cavity length to satisfy the commensurate condition can lead to the frequency spacing to be various order harmonics of the mode spacing of the monolithic cavity. The maximum pulse repetition rate of the laser output can be up to 216 GHz and the pulse duration is as short as 330 fs. More importantly, the overall characteristics of the first‐order temporal autocorrelation traces obtained by sequentially scanning the external cavity.length display an intriguing phenomenon of temporally fractional revivals, similar to the feature of spatial Talbot revivals.

     

Microgels at droplet interfaces of water-in-oil emulsions—challenges and progress

Most of the commonly used microgels (MGs) are hydrophilic and tend to form oil-in-water emulsions. In this review, we discuss the function of MGs at the droplet interface in order to stabilize water-in-oil (w/o) emulsions. This topic addresses both interesting questions in fundamental research and a significant impact for applications, where the w/o emulsion type is of essential importance. Promising approaches to stabilize w/o emulsions with MGs are highlighted from different perspectives, ranging from novel MG modifications to assisted co-stabilization by adding soft or hard particles. We summarize the accumulated knowledge, evaluate the challenges and solutions, and highlight future research trends.     

Water-in-Oil-in-Water Nanoemulsions Containing Temulawak (Curcuma xanthorriza Roxb) and Red Dragon Fruit (Hylocereus polyrhizus) Extracts

Hydrophobic curcumin in temulawak extract and hydrophilic betacyanin in red dragon fruit extract are high-value bioactive compounds with extensive applications in functional food. In this study, these extracts were encapsulated in water-in-oil-in-water (w/o/w) nanoemulsions as a delivery system using a two-step high-energy emulsification method. PGPR and Span 20 were used as lipophilic emulsifiers for the primary w/o emulsion. The most stable w/o/w formulation with the least oil phase separation of 5% v/v consisted of w/o emulsion (15% w/w) and Tween 80 (1.5% w/w) as hydrophilic emulsifier. The formulation was characterized by a 189-nm mean droplet diameter, 0.16 polydispersity index, and –32 mV zeta potential. The freeze–thaw stability may be attributed to the combination of low w/o emulsion content and high Tween 80 concentration in the outer water phase of the w/o/w nanoemulsions used in this study. The IC₅₀ values of the nanoemulsion and the red dragon fruit extract were similar. It means that the higher concentration of curcumin in the nanoemulsions and the lower IC₅₀ value of temulawak extract ensured sufficient antioxidant activities of the w/o/w nanoemulsions.     

重视反馈的逆向教学设计:以质谱课程的教学为例*

基于逆向教学设计的特点及实践,分析了传统逆向教学设计的课堂实现中存在的关于预期评估与实际评估脱节的问题,阐述了教学反馈的重要性。从而提出了一种重视反馈的逆向教学设计方法。这种方法将评估预判和反馈策略充分结合到逆向教学设计中,在评估和反馈之间进行了有效关联,很好地解决了以上问题。结合笔者在质谱课程中的实践经验,对相应的教学设计的过程进行了举例说明。