Adsorption Behavior of a Water-soluble Porphyrin at the Glass-water Interface as Studied by Synchronous Total Internal Reflection Fluorescence Spectroscopy

Total imernal reflection fluorescence spectroscopy (TIRF) and synchronous scanning technique were combined to study the adsorption behavior of the meso-tetrakis (4-sulfonatophenyl)porphyrin (TPPS) at the glass-water interface without any surfactant. The pH dependence of synchronous fluorescence signal at the interface was analyzed. Both unprotonated (TPPS^4-) and diprotonated (H2TPPS^2-) forms of TPPS were observed at the interface. But the interface favored the adsorption of. The apparent estimated pKa2 value shifted from 5.00 in the bulk solution to 2.7 at the interface. STIRF provides a good technique to study multi-component systems at the interface.     

FT-EPR Spectroscopic Study of Silicophosphate Glasses Derived from Gels

(100-x) mole% SiO₂-x mole% P₂O₅-glasses withx=1–9 have been prepared by the sol-gel process using tetraethylorthosilicate and triethylphosphate as precursors. The gels were fired at various temperatures up to 950°C and then exposed to γ-ray irradiation to induce paramagnetic centers. CW-EPR and FT-EPR Spectroscopies were employed at temperatures between 4 and 300 K in order to determine the resulting structures. The dried gels exhibited four types of O ₂ ⁻ -ions trapped in pores of different sizes. The gels fired atT=670°C exhibited theE’ ₁-center and non-bridging oxygen as a results of the fracture of the Si-O-Si bonds. At higher temperatures, the spectra of the POHC, POHC ^b ,E’, and CH ₃ ⁻ -centers have been detected that are a function ofx andT.     

A generalized equation describing isotope exchange kinetics at solid-liquid interface

A generalization of the kinetic equation for the isotope exchange at solid—liquid interface is presented. The generalized equation may be used to describe kinetics of the isotope exchange process limited by surface reactions and diffusion without assumption of spherical symmetry of solid particles.

---

Eine generalisierte Gleichung für die Kinetik des Isotopenaustausches an Fest-Flüssig-Phasengrenzen

Zusammenfassung Es wird eine generalisierte kinetische Gleichung angegeben, die die Kinetik des Isotopenaustausches an Fest-Flüssig-Phasengrenzen beschreibt, wobei der Austauschprozeß durch Oberflächenreaktionen und Diffusion ohne der Annahme sphärischer Symmetrie für die festen Partikel begrenzt ist.

     

Formal Mathematical Analysis of the Existence of the Common Intersection Point in Relation to Determining the Parameters Describing Ion Adsorption at the Oxide/Electrolyte Interface: Comparison of the Triple and Four-Layer Models

For most oxide/electrolyte systems potentiometric titration curves measured for different ionic strengths have a Common Intersection Point (CIP) which corresponds to the Point of Zero Charge (PZC). However, there are systems where a CIP exists but the surface charge at this point does not equal zero (PZC CIP). In this paper theoretical analysis of the systems in which the PZC and CIP do not coincide is presented. It is based on the well-known 2-pK surface charging approach and Triple Layer Model (TLM) as well as the Four Layer Model (FLM) of the electric double layer. The appropriate mathematical criterion for CIP existence was applied with detailed derivations, both for TLM and FLM. Having determined in this manner the parameter values, one can draw proper conclusions about the features of oxide/electrolyte adsorption systems, in which PZC and CIP do not coincide. The values of adsorption parameters are found by fitting simultaneously the obtained theoretical expressions to both of the experimental titration isotherms, and to the individual isotherms of electrolyte cation adsorption measured using radiometric methods.     

Fine structures of zeolite-Linde-L (LTL): surface structures, growth unit and defects

High-resolution electron microscopy (HREM) has been used to image the surface structure of nano- and micrometer-sized synthetic crystals of zeolite-Linde-L (LTL). Columnar holes and rotational, nano-sized, wheel-like defects were observed within the crystals, where the hole has a minimum size equal to that of the rotational defect. Predictions of surface structure from atomistic computer simulation concur with the observations from HREM and provide insight into the crystal growth mechanism of perfect and defective LTL. Analysis of the energetics of the formation of rotational defect structures reveals that the driving force for defect creation is thermodynamic and furthermore, the rotational defects could be created in high concentrations. Formation of a columnar hole is found to be slightly energetically unfavourable and therefore we speculate that the incidence of both rotational and nano-sized vacancy defects is strongly dependent on kinetic factors and reaction conditions. The morphology of nano- and microcrystalline LTL is contradistinct and we use insights from simulation to propose an explanation of the disparity in crystal shape.     

Improvement of the spinning electrophorometer for zeta potential measurements

In this study, bubbles are held by centripetal force at the center of a rotating cylinder filled with an aqueous solution. Their velocities along the axe of rotation, after application of an electrophoretic force, are used for the calculation of the so-called electrokinetic potential. But this process necessitates the elimination of the electro-osmosis which occurs on the interior sides of the glass cylinder by superposing a concurrent force on the bubble. Efficiency of DEAE-Dextran reticulated with 1,4 Butanediol Diglycidyl Ether can be tested by the observation of a cloud of latex microspheres injected in the interior of the tube and allowed to move in respect with the application of an electric field. The experimental control of these velocity profiles proves the adequacy of the polymer for many cases such as surfactant solutions, presence of electrolytes, utilization with moderate pH.The dynamic interpretation of the electrophoretic motion of bubbles is possible by considering that small ones behave like rigid spheres moving in a rotating fluid. In the second part of this paper and in a previous publication, we have experimentally proved that the use of the theoretical expressions of the forces involved for rigid spheres is justified for small bubbles. So, the electrokinetic potential can be expressed versus the velocity, leading to possible interpretations of the adsorption on gas-water interfaces.     

Surface mixed adsorption films of 2,4,6- trimethylphenol–2,4,6-trichlorophenol at aqueous solution/air interface

 The results of experimental studies of the adsorption at the solution/air interface from an aqueous mixture: 2,4,6-trimethylphenol–2,4,6-trichlorophenol are presented. The surface properties of the above-mentioned mixture were studied by surface potential and surface tension measurements. These measurements were carried out as a function of the concentration of 2,4,6-trimethylphenol aqueous solution at a constant concentration of 2,4,6-trichlorophenol. Using the results obtained and based on the Gibbs equation, Helmholtz formula and Motomura’s method the relative surface excesses of adsorbed substances, effective dipole moments, surface molar fractions of solutes and miscibility of adsorbed films were determined. Received: 7 November 1997 Accepted: 26 February 1998     

Pb2＋在液/液界面迁移的电化学研究及其应用

用循环伏安法研究了双硫腙络合推动Pb^2＋在水/乙酰丙酮界面迁移的伏安过程. 实验证明, 该过程是受扩散控制的不可逆过程, Pb^2＋由水相转移到有机相中, 与双硫腙形成络合物Pb(DzH)₂. Pb^2＋的峰电位在－0.3 V处, 并且在5× 10^－6～0.1 mol•L^－1范围内与峰电流成正比. 这一方法为工业废水中铅的在线、现场测定提供了可靠、灵敏的检测方法.     

First‐principles study of metal/nitride polar interfaces: Ti/TiN

We have examined the optimal interface structure, ideal work of adhesion and bonding character of polar Ti(110)/TiN(111) interfaces by first‐principles density‐functional plane‐wave pseudopotential calculations. Both Ti‐ and N‐terminated interfaces, including six different interface structures, were calculated. The interface structure for each termination, continuing the TiN crystal structure across the interface, has the largest work of adhesion. Although both terminations yield substantial adhesion energies in the range 3–7 J m^?2, the N‐terminated interface is ～4 J m^?2 stronger than the Ti‐terminated interface. Analysis of the interfacial electronic structure shows that the Ti‐terminated interface is a mixed strong, metallic and weak covalent character, whereas the N‐terminated interface is a polar covalent bond similar to the Ti/TiC interface. Further study of the separation of the optimal interface shows that the cleavages will never fracture at the interface due to the strong bonding, which is consistent with the experimental results. Copyright © 2003 John Wiley & Sons, Ltd.     

曲率流的参数化有限元逼近

许多物理现象可以在数学上描述为受曲率驱动的自由界面运动,例如薄膜和泡沫的演变、晶体生长,等等.这些薄膜和界面的运动常依赖于其表面曲率,从而可以用相应的曲率流来描述,其相关自由界面问题的数值计算和误差分析一直是计算数学领域中的难点.参数化有限元法是曲率流的一类有效计算方法,已经能够成功模拟一些曲面在几类基本的曲率流下的演化过程.本文重点讨论曲率流的参数化有限元逼近,它的产生、发展和当前的一些挑战.