硅灰石矿物发光原料中Fe2+的去除与CaSiO3∶Eu3+的光谱特性

提出了用草酸．邻菲哕啉去除硅灰石中Fe^2 的方法，研究了浸取剂的浓度、浸取时间和温度等条件对Fe^2 的去除率的影响，在最佳的浸取条件下，Fe^2 的去除率达到98．35％。在去除猝灭剂后的硅灰石矿物中，掺加适量的稀土激活剂Eu^3 ，通过高温固相法制成荧光发光材料，发光强度明显提高，接近于化学试剂合成的发光材料。     

A Novel Proton Sensor with Luminescence and Color Signaling Based on Platinum(II) Terpyridyl Acetylide Complex

Molecular switches that are controllable, reversible and readable at molecular level are an essential compo-nent of molecular electronics1 and chemical sensors.2-6 Of particular interest are the molecules which show dramatic and reversible changes in color and/or lumi-nescence in visible spectral region upon exposure to specific substrates. A number of chromophore- spacer-receptor systems that can selectively recognize specific guest molecules at their receptor site and pro-duce measurable col…     

Temperature-sensitive luminescence of tris (β-diketone) europium chelates for monitoring high-speed cationic photopolymerizations

The temperature-dependent luminescence of tris (β-diketone) chelates of europium was used for in situ temperature measurements during cationic photopolymerizations of vinyl ethers. These molecular-level luminescent probes provided a real-time, noninvasive method for monitoring temperature during these high-speed polymerizations. Two specific probes, tris (benzoyl-1, 1, 1-trifluoroacetone) europium and tris (1,1,1,5,5,5,-hexafluoroacetylacetone) europium, met several stringent spectral and performance requirements for application in our system. The luminescence from these probes exhibits a reproducible temperature dependence over a wide temperature range and is not sensitive to changes in viscosity. In situ temperature profiles obtained using this novel technique verified the importance of thermal effects during these highly exothermic photopolymerizations. These studies have demonstrated the utility of the tris(β-diketone) europium chelates for characterizing the temperature during high-speed photopolymerizations that cannot be monitored using conventional techniques. © 1995 John Wiley & Sons, Inc.     

Electron and light microscopical investigation of defect structures in mesophases of pharmaceutical substances

 Transmission electron microscopy of freeze fractured and replicated samples (TEM) and polarizing light microscopy (PLM) are used to investigate the defect structures of the thermotropic and lyotropic mesophases of the non-steroidal antiinflammatory drug fenoprofen sodium and of the thermotropic mesophase of the nonionic surfactant sucrose oleate (O1570). All mesophases have a layered, smectic structure. The thermotropic liquid crystal of feno-profen sodium is an interdigitated smectic A phase (smectic Ad) having the highest viscosity of the investigated samples. The thermotropic mesophase of the sugar ester is also of the type smectic A, likely to be of subtype smectic A2 (bilayered smectic structure). The lyotropic mesophase is of lamellar liquid crystalline nature and has a much lower viscosity than the thermotropic mesophases. In the PLM the lyotropic fenoprofen mesophase has a strong tendency to form a pseudoisotropic texture, indicating a strong tendency to form undisturbed layered structures. Other textures exhibited in the PLM are fan-shaped texture and maltese-cross texture. Confocal domains, cylinders, pits and peaks as well as screw dislocations are found in great number in the TEM. However, no greater regions of undisturbed lamellar arrangement in the lyotropic mesophase could be detected. The only texture of the thermotropic fenoprofen mesophase visible in the PLM is the fan-shaped texture, indicating confocal domains as predominant structural elements. However, no confocal domains (tori or Dupin cyclides) are found in the TEM. In the PLM the sugar–ester mesophase exhibited a fan-shaped texture, maltese crosses and oily streaks as dominant textures. In the TEM only a few +π and −π disclinations and imperfect confocal domains could be detected. The discrepancies in the appearance of defect structures and textures between the mesophases as well as the discrepancies in the findings in the PLM and in the TEM investigations are caused by the different sample preparation and the different viscosities of the mesophases. Received: 28 May 1997 Accepted: 2 September 1997     

Sm~(3 )在硼酸盐玻璃中的发光及Bi~(3 )对Sm~(3 )的敏化作用

早在六十年代,人们为了寻找较好的激光玻璃,曾对Sm~(3 )离子掺杂的玻璃中的光谱进行过研究。为了探寻新型的激光,发光玻璃,又进一步研究了Sm~(3 )在玻璃中的发光和敏化。我们以寻找一种高亮度,低成本的发光玻璃为目的,研究了基质玻璃组成,敏化离子及其浓度对Sm~(3 )发光性质的影响。 选择B_2O_3-BaO-M_mO_n(M_mO_n=Li_2O,Na_2O,K_2O,MgO,CaO,SrO)玻璃体系,所用原料的纯度皆为分析纯以上,用陶瓷坩埚在1250℃掺杂氧化钐(纯度均大于99％),玻璃的荧光谱和激发光谱,用MPF-4型荧光分光光度计测定。     

Specific features of luminescence of Q-CdS colloids with different sizes

The specific features of luminescence of colloidal solutions of Q-CdS with particles of different size and the regularities of luminescence quenching by quenchers of various nature were studied. The luminescence spectra of Q-CdS consist of several bands, which are shifted to the long-ware region as the particle size increases. The dependence of the integral quantum yield of luminescence on the particle size has a sharp maximum at a particle diameter of ?23Å. A Stem—Volmer-type equation including the adsorption isotherm of the quencher molecules on the surface of the Q-CdS colloidal particles was used to describe the regularities of luminescence quenching of Q-CdS colloidal solutions. The CdS particle size was found to affect the efficiency of luminescence quenching. The regularities of luminescence quenching depend both on the rate constant of electron transfer to the quencher molecules and on the ability of the quencher molecules to be adsorbed on the surface of the CdS colloidal particle.     

固溶体结构对Ca_(2-x)Sr_xZn_4Ti_(15)O_(36)∶Pr~(3+)发光性质的影响

0引言在绿色和蓝色长余辉发光材料达到应用程度之后,耐候性红色长余辉发光材料成为人们研究的重点。Eu3 、Sm3 激活的硫氧化物[1￣3]、Eu2 铝锶复合硫氧化物[4]和Y2O3∶Eu3 [5]等耐热耐水性红色长余辉材料被相继发现。Pr3 离子掺杂的碱土金属钛酸盐(M TiO3∶Pr,M=M g,Ca,Sr,Ba)是一种新型的红色长余辉发光材料。这种发光材料在615nm附近有很好的单色性红光发射。碱土金属钛酸盐基质化学性能稳定,已开始应用于场发射显示器(FE D)[6,7]。碱土金属钛酸盐是A BO3型化合物,具有钙钛矿结构。B all[8]曾通过在CaTiO3中掺入不同量的Sr2 …     

A multi-color and white-light emissive cucurbituril/ terpyridine/ lanthanide supramolecular nanofiber

The enhanced lanthanide white-emission in solid by cucurbituril-based supramolecular assembly may provide a new strategy for smart light-emitting materials.     

镀液中Ce^3＋离子对锡镀层结构缺陷和可焊性的影响

应用荧光分析法、X光电子能谱法(XPS)及正电子湮没寿命谱法(PALS)等研究了从含硫酸铈添加剂的酸性光亮锡镀液获得的锡镀层结构缺陷与可焊性的关系。结果表明,电镀时Ce与Sn不发生共沉积,Ce~(3+)的主要作用是阻化Sn~(2+)的水解和氧化使镀液稳定,因而使锡镀层纯度提高、结构致密、表层氧含量减少,有利于提高镀层的可焊性。当Ce~(3+)浓度控制在3.5g/L左右时,可使镀层结构缺陷较少,可焊性较佳,说明结构缺陷是影响锡镀层可焊性的直接原因。     

Gd_3Al_5O_(12)∶Eu~(3+)柠檬酸盐硝酸盐燃烧法合成及其发光性能研究

采用柠檬酸盐硝酸盐燃烧法,在较低的温度(900℃)下成功地合成单一晶相Gd3Al5O12∶Eu3+发光粉体,紫外激发荧光光谱分析表明,粉体615 nm和593 nm荧光发射源于Eu3+的5D0-7F2和5D0-7F1跃迁.该方法中各工艺条件(如pH值、柠檬酸/金属离子比、煅烧温度)对Gd3Al5O12∶Eu3+发光性能均有影响,通过试验得出了获得最佳发光性能荧光粉体的工艺参数.