Laminar bubbly flow in an open capillary channel in microgravity

The study of a bubbly laminar two-phase flow in an open capillary channel under microgravity conditions was conducted aboard the sounding rocket, Texus-45. The channel consists of two parallel plates of width b = 25 mm and distance a = 10 mm. The flow along the length l = 80 mm is confined by a free surface on one side and a plate on the opposite side. The bubbles are injected at the nozzle of the capillary channel via six capillary tubes of 100 μm in inner diameter. Different liquid and gas flow rates were tested leading to different liquid free surface shape and bubble size.     

Physical model of acoustic forward scattering by cylindrical shell and its experimental validation

Research on the underwater target scattering can provide important theoretical support for target detection. The scattering model of cylindrical shell is established in this paper. It is found that the forward target strength is much stronger and varies with angles of incident wave less significantly than backward target strength. The received forward signal strength fluctuates with the target moving due to the interference between direct signal and scattering signal, which is most significant when target approaches the baseline. An experiment is carried out in an anechoic tank to validate the scattering model. The method of acquisiting forward scattering in the tank is proposed. The forward and the backward target strengths are achieved by using the pulse compression technology, and they are about 3dB less than the modeling results. The forward scattering phenomena of quiescent and moving target are measured, which are similar to modeling results with different target types.     

Triaxial stress state of cylindrical openings for rocks modeled by elastoplasticity and strength criterion

An analytical solution for calculating the triaxial stress state around a cylindrical opening in an elastoplastic cohesive medium is developed. Magnitude of the slip zones around a cylindrical opening in crack-weakened rock masses is considered by modifying the existing strength criterion for rocks of different types. The disturbance coefficient, the geological strength index and the other strength parameters are also investigated.     

冲击波作用下铝的准弹性卸载行为

根据一维应变冲击波的基本关系,将Cochran 等定义的有效剪切模量与准弹性卸载过程的纵波和体波声速关联起来,并藉此研究了冲击波作用下铝的准弹性卸载特性. 利用VISAR高压声速测量技术获得了LY12铝在20$\sim$100\,GPa压力下沿着准弹性卸载过程的有效剪切模量,结果表明LY12铝的有效剪切模量随卸载应力的下降而迅速下降. 采用与卸载应力成线性关系的方程对有效剪切模量进行了近似描述,该方程的斜率随初始冲击压力的增加而增加,体现了准弹性卸载行为的压力相关性. 将有效剪切模量结果与准静态实验结果进行了比较,由此分析了冲击波作用下准弹性卸载过程的可能物理机制. 应用有效剪切模量方程对6061铝合金的准弹性行为进行了模拟,计算结果与实验结果符合很好.      

三类锚杆受拉作用解析解的统一表达式

利用点荷载作用于半无限空间的Mindlin位移解,根据位移协调条件得出内锚式锚杆受拉作用的解析解,然后推导出全长粘结锚杆、压力型锚杆的解析解,建立了这3类锚杆受拉作用解析解的统一表达式.利用所求得的解析解,研究了锚杆类型、土体弹性模量、锚杆孔径对锚杆应力分布的影响.结果表明:(1)3类锚杆的剪应力都是单峰值的曲线;(2)土体弹性模量增大,则锚杆剪应力峰值增大,但分布范围减小;(3)锚杆孔径增大,则锚杆剪应力峰值减小,但对其分布范围几乎没有影响.     

开口薄壁杆件横截面几何性质计算

基于有限元方法的思想, 给出了厚度线性变化的薄壁结构扇性几何性质 计算的一种方法, 通过数值实施, 表明了所给方法的正确和有效性.     

新老混凝土粘结的抗压强度塑性极限分析

对新老混凝土粘结试块进行了抗压强度研究,发现新老混凝土粘结在竖向受压情况下,其抗压强度远低于整浇混凝土的抗压强度.因此,对新老混凝土粘结试块的竖向抗压强度进行相关理论分析,并根据试验,提出了新老混凝土粘结的受压破坏机构;又利用塑性极限分析中的上限定理,得到了新老混凝土粘结抗压强度的理论解.对比理论解与试验值,发现理论解高于试验值,在详细分析原因后,对理论解进行了相应修正.     

Role of magnetic shear on the electrostatic current driven ion-cyclotron instability in the presence of parallel electric field

Recent observation and theoretical investigations have led to the significance of electrostatic ion cyclotron (EIC) waves in the electrodynamics of acceleration process. The instability is one of the fundamental of a current carrying magnetized plasma. The EIC instability has the lowest threshold current among the current driven instabilities. On the basis of local analysis where inhomogeneities like the magnetic shear and the finite width current channel, have been ignored which is prevalent in the magnetospheric environment. On the basis of non-local analysis interesting modification has been incorporated by the inclusion of magnetic shear. In this paper we provide an analytical approach for the non-local treatment of current driven electrostatic waves in presence of parallel electric field. The growth rate is significantly influenced by the field aligned electron drift. The presence of electric field enhances the growth of EIC waves while magnetic shear stabilizes the system.     

部分剪力连接钢—砼组合梁的滑移及曲率分析

对受均布荷载作用的简支部分剪力连接钢－砼组合梁的滑移应变和滑移的分布规律进行了理论分析,得出部分剪力连接钢－砼组合梁的剪力连接程度系数与滑移应变和滑移的关系。分析了考虑滑移效应的梁的曲率及其与剪力连接程度系数之间的关系。结果与结构在弹性阶段的实验相当吻合,对组合梁挠度的精确计算有指导意义。     

纺织结构复合材料的力学性能研究

从纺织几何学入手,通过对纺织结构复合材料细胞构型的分析,建立其刚度矩阵和本构关系,并结合纺织结构复合材料的损伤和演化规律分析,完整地描述纺织结构复合材料的力学特点.着重讨论物理概念和研究方法,以促进了解纺织复合材料的分析理论和它的工程应用.