叠氮化氰的光解离机理

采用多参考态方法,在MRCI+Q//CAS(10,9)/6-311+G(2df)水平上对叠氮化氰(N3CN)的光解离机理进行理论研究.优化得到基态(S0)和低激发态(S1、S2、T1)势能面上的极小点、过渡态、内转换交叉点(IC-S1/S0)和隙间窜跃交叉点(ISC-S1/T1)的结构和能量,构建反应势能面.在MRCI+Q//CAS(10,9)水平上计算N3CN的垂直激发能,并和实验值进行对比.结果表明,在S0、S1、S2和T1态势能面上,N—N键断裂生成N2+NCN是主要解离途径,而C—N键断裂通道是次要通道.实验观测到220 nm处的吸收峰对应分子由S0态到S1态的激发,对应主要光解离产物为NCN[a1△g];而在275 nm处的吸收峰则对应分子被激发到T1态,然后直接生成基态产物NCN[X3Σg-].我们的理论结果与实验测量符合得很好.     

二氧化钛纳米棒在空心微球表面的定向生长

通过表面预处理和水热法开展了用二氧化钛包覆空心微球的研究, 用扫描电子显微镜(SEM)和X射线衍射仪(XRD)等表征了所得产品, 并探索了各种反应参数对产物形貌和结构的调控作用. 实验结果表明, 空心微球的表面溶胶-凝胶预处理至关重要. 采用表面溶胶-凝胶技术预处理空心微球表面, 然后在一定条件下进行水热反应, 我们在空心微球表面上成功地包覆了垂直于微球表面并紧密排列的锐钛矿型二氧化钛纳米棒. 该材料质轻、耐腐蚀, 有望成为一种新型光催化剂, 应用于治理水体表面的大面积污染.     

Ab Initio Study on the Mechanism of Cycloaddition Reaction between Silylene Carbene （H_2Si=C：） and Acetone

The mechanism of cycloaddition reaction between singlet silylene carbene and acetone has been investigated with CCSD(T)//MP2/6-31G method. From the potential energy profile, it can be predicted that the reaction has two competitive dominant reaction pathways. One consists of two steps: (1) the two reactants (R1, R2) firstly form a four-membered ring intermediate (INT4) through a barrier-free exothermic reaction of 585.9 kJ/mol; (2) Then intermediate (INT4) isomerizes to CH3-transfer product (P4.1) via a transition state (TS4.1) with energy barrier of 5.3 kJ/mol. The other is as follows: on the basis of intermediate (INT4) created between R1 and R2, intermediate (INT4) further reacts with acetone (R2) to form the intermediate (INT5) through a barrier-free exothermic reaction of 166.3 kJ/mol; Then, intermediate (INT5) isomerizes to a silicic bis-heterocyclic product (P5) via a transition state (TS5), for which the barrier is 54.9 kJ/mol. The presented rule of this reaction: the [2+2] cycloaddition effect between the π orbital of silylene carbene and the π orbital of π-bonded compounds leads to the formation of a four-membered ring intermediate (INT4); The unsaturated property of C atom from carbene in the four-membered ring intermediate (INT4) results in the generation of CH3-transfer product (P4.1) and silicic bis-heterocyclic compound (P5).     

On-line solid-phase extraction-HPLC-fluorescence detection for simultaneous determination of puerarin and daidzein in human serum

Response surface methodology (RSM) was applied to the optimization of on-line solid-phase extraction (SPE) parameters, and an automated system of on-line SPE coupled with high-performance liquid chromatography (HPLC) with fluorescence detection was developed for the determination of puerarin and daidzein in human serum. The human serum sample of 50 μL was injected into a conditioned C18 SPE cartridge, and the matrix was washed out with acetonitrile-KH₂PO₄-triethylamine buffer (0.01 M, pH 7.4) (3:97, v/v) for 3 min at a flow rate of 0.25 mL/min. Then the target analytes were eluted and transferred to the analytical column. A chromatographic gradient elution was programmed with the mobile phase consisting of acetonitrile and KH₂PO₄-triethylamine buffer, and the analytes were determined with a fluorescence detector at excitation wavelength of 350 nm and emission wavelength of 472 nm, respectively. The proposed method presented good linear relations (0.85-170 μg/mL for puerarin and 0.2-40 μg/mL for daidzein), satisfactory precision (RSD < 8%), and accredited recovery (92.5-107.8%).     

固相萃取人体血液中安定条件的统计学筛选与响应面优化

采用Plackett-Buman(P-B)法和中心复合设计(Central Composite Design,简称CCD)对影响固相萃取安定的6个因素进行筛选优化。P-B实验设计与统计学分析表明:pH、上样速度、洗脱液用量是影响回收率的3个关键因素。以回收率为响应目标,对3因素进行中心复合设计,并经响应面法优化分析得到影响回收率的二阶模型,确定了安定萃取实验的最优操作条件:pH10.20,上样速度0.67 mL/min,洗脱液用量2.60 mL,实测回收率达到91.26%。在0.10～10.00μg/mL的范围内本方法线性良好(R2>0.99),检测限为0.07μg/mL,日内和日间相对标准偏差(RSD)<10%,准确度(RE)<±6.0%。     

低温等离子体协助B2O3/γ-Al2O3 选择催化还原NO（英文）

研究了低温等离子体协助催化条件下甲烷选择性催化还原NO反应(SCR).反应气体经等离子体活化后,生成NO2,HCHO,CH3NO和CH3NO2等活性更高的中间产物.程序升温表面反应表明,这些中间产物可在等离子体后置催化装置上进一步反应,从而使NOx还原为N2.在考察的一系列催化剂(包括γ-Al2O3,Ag/γ-Al2O3,B2O3/γ-Al2O3,Ga2O3/γ-Al2O3,In2O3/γ-Al2O3等)中,B2O3/γ-Al2O3表现出最好的催化活性.当反应温度为300oC时,NOx转化率达到最高.与γ-Al2O3催化剂相比,在10wt%B2O3/γ-Al2O3催化剂上,300oC时,NOx转化为N2的转化率从33.4%提高至51.0%.催化剂的酸性对于经等离子体活化后的反应气体在催化剂上的SCR反应起到重要作用.同时,催化剂上吸附态NOx对于NOx的转化也起到一定作用.     

系列磺丁基甜菜碱的表征及表面活性

用FT-IR、1H NMR和元素分析对自制的3种磺丁基甜菜碱(SBm-4)的结构进行了表征,研究了它们的表面性能、泡沫性能和乳化性能。 获得SB12-4的cmc为2.20×10-3 mol/L,γcmc为31.48 mN/m;SB14-4的cmc为2.80×10-4 mol/L,γcmc为29.68 mN/m;SB16-4的cmc为2.30×10-5 mol/L,γcmc为32.06 mN/m。 3种磺丁基甜菜碱的cmc值随着烷基链长增加逐渐减小,γcmc先减小后增加,三者的起泡性随浓度增加而增加,到一定值后保持不变;泡沫稳定性随浓度增加逐渐增强,起泡性随着温度的增加有缓慢增加趋势,泡沫稳定性随温度增加逐渐降低。 3种表面活性剂的乳化能力随浓度增加先增加后降低。     

MnO_x-CeO_2上表面氧性质及其催化碳烟燃烧性能

运用TPO,XRD,BET,O2-TPD,H2-TPR,XPS等技术,研究了在CeO2中引入不同Mn含量对催化剂表面氧性质的影响,并重点探讨了吸附于氧空位上的原子吸附氧O-与催化碳烟燃烧活性的关联。结果表明:将Mn中引入CeO2后,MnOx-CeO2晶格中可形成较CeO2更多的氧空位,并有利于氧的活化和迁移,生成了较多原子吸附氧O-;MnOx(0.4)-CeO2在碳烟起燃温度区间有最多的原子吸附氧O-,其碳烟起燃活性最高,对应的起燃温度是346℃,比无催化剂时降低了111℃,比CeO2降低了35℃。     

硅胶的表面硅烷化处理及其吸附性能研究

为研究改性硅胶对挥发性有机废气的吸附性能,分别采用十六烷基三甲氧基硅烷、辛基三乙氧基硅烷、苯基三甲氧基硅烷、一甲基三乙氧基硅烷对硅胶进行气相改性处理,试验研究了不同改性剂、改性时间对硅胶饱和吸附率的影响,考察了改性硅胶对甲苯、水二组分体系的吸附选择性.结果表明,硅胶对甲苯的吸附主要为物理吸附,长链的硅烷改性剂在60℃、...     

退火对TiO2纳米管/线复合阵列表面光电性质的影响

采用阳极氧化法制备了TiO2纳米管/线复合阵列. 利用表面光电压谱(SPS)和场诱导表面光电压谱(FISPS)研究了退火对TiO2纳米管/线复合阵列表面光电性质的影响. 结果表明, TiO2纳米管/线复合阵列在晶化前后的导带边缘均出现了束缚激子态, 晶化前由于自建场较弱, 束缚激子态能在正负电场作用下发生不对称偏转; 晶化后, 晶体结构从非晶态变为晶态, 自建场增强, 束缚激子态对正电场敏感并表现出明显的光伏响应, 而在负电场作用下束缚激子态没有任何光伏响应.