Magnetic hysteresis of the magnetoresistance and the critical current density in polycrystalline YBa2Cu3O7−δ–Ag superconductors

A systematic study of the magnetic hysteresis in transport properties of polycrystalline YBa₂Cu₃O_7−δ–Ag compounds has been made based on two kinds of measurements at 77 K and under applied magnetic fields up to 30 mT: critical current density J_c(B_a) and magnetoresistance R(B_a). The R(B_a) curves show a minimum in their decreasing branch occurring at B=B_min which was found to be both the excitation current I_ex and the maximum applied magnetic field B_am dependent. In addition, for a certain value of B_am>5 mT, we have observed that B_min increases with increasing I_ex and reaches a saturation value. The J_c(B_a) curves show a maximum in decreasing applied magnetic fields occurring at B=B_max. We have also found that B_max increases with increasing B_am and reaches a saturation value. The minimum in the R(B_a) and the maximum in J_c(B_a) curves were found to be related to the trapped flux within the grains. All the experimental results are discussed within the context of the flux dynamics and transport mechanisms in these high-T_c materials.     

Unusual current‐voltage characteristics of single crystalline and bicrystalline La0.7Ca0.3MnO3 films

The current‐voltage characteristics of single crystalline and bicrystalline La_0.7Ca_0.3MnO₃ films were measured and analyzed. Several epitaxial films, as well as 45° [001]‐tilt grain boundaries, display current‐voltage characteristics which are asymmetric with respect to polarity reversal of the bias current. One epitaxial film has a polarity dependent resistance of ～340kΩ and of ～670kΩ in forward and in reverse direction, respectively.     

Standardization of Methods for Characterizing the Surface Geometry of Solids

Since a comprehensive survey published in 1999 [1] much work was done in standardizing measuring methods to characterize the surface geometry of dispersed and/or porous solids and to certify reference materials. The present paper is an extension of a short communication [2]. It gives a survey on existing standards and reports on new drafts and proposals.     

多束速调管的增益带宽

 研究了M个束、N个共振腔的多束速调管(MBK)的增益和带宽，得到了描述小信号增益和带宽与器件结构参数和电子束参数关系的公式，给出了在不同参数下增益随频率的变化曲线。分析了多腔对增益，多束对带宽的影响。计算结果表明：多腔可以提高增益；多束可以降低Q值，从而可以增中带宽，带宽增加工了3.6%，还可以提高增益；对于MBK，频率交叉调谐对增加带宽不如频率调谐好；空间电荷波只对增益有影响，对带宽没有影响。最后，预估一种L带多束速调管的增益带宽为8.1%。     

托卡马克能量约束及自举电流效应的初步考虑

基于Lee等人的离子温度梯度模导致的反常热能输运系数,本文研究了辅助加热托卡马克等离子体的能量约束行为,并对自举电流的效应作了初步考虑。结果表明,计算得到的能量约束时间随等离子体电流I_p和托卡马克大半径R增大而增长,随注入功率P_t、环向场B_t以及等离子体小半径α的增大而缩短。这些结果与Kaye-Goldston的经验约束定标具有相同的趋势。自举电流的存在总是导致能量约束时间的增加,当自举电流与总电流的比值γ较小时,能量约束时间的增加率约为γ/2。此外,自举电流将造成锯齿反转半径的减小。     

Optical current transducer with bulk type Bi12SiO20 faraday sensor for power systems

Two types of optical current transducers (OCTs) have a bulk Faraday sensor inserted into the gap of an iron core and a porcelain insulator with optical fiber. The sensor consists of Bi₁₂SiO₂₀ (BSO) single crystal, a polarizer, and an analyzer. The OCTs satisfied the target performance requirement for fault location and metering and demonstrated maintained performance at some power utilities in Japan and the US. We have developed a fault location system that immediately detects the fault current with the OCTs, there by locating the fault section. The OCT can easily replace the existing support insulators for the disconnecting switch without any modifications to structure height or bus-bar. For metering requiring 0.3% class accuracy, use of a BSO with right optical rotatory power combined with BSO with left optical rotatory power results in a Faraday sensor with improved temperature characteristics. The OCT demonstrated 0.3% class accuracy for metering described in the current transformer Specifications of IEEE C57–13, 1993.     

多气隙电阻板室抗辐照性能研究

给出了为RHIC-STAR飞行时间探测器设计的多气隙电阻板室(MRPC)的辐照实验结果. 实验采用100mCi⁶⁰Co γ源, 采用不同的剂量率对MRPC进行辐照. 一个室在大剂量率2.87×10^－2Gy/h下辐照了24h后, 其性能如噪声计数率, 暗电流等均大大退化. 另一个室在相对低剂量率5.31×10^－4Gy/h下辐照了530h, 其性能没有见到任何变坏. 实验的目的是为了了解这种探测器在几年的运行中经过大剂量的辐照后的性能变化情况.     

交流源作用下介观RLC电路系统量子态随时间的演化

根据量子不变量理论，同时考虑介观电容器极板间电子波函数的耦合作用和电路的耗散,研究介观RLC电路系统在交流电流源作用下动力学的演化过程，并且得到描述系统量子态随时间的演化算符.进一步的分析结果表明，介观RLC电路系统的波函数将由任意的初态演化到一般的压缩态. 关键词： 介观RLC电路 交变电源 不变量理论 时间演化算符     

s波超导体绝缘层dx2-y2波超导体结的直流Josephson电流

在s波超导体绝缘层dx2-y2波超导体结(sId)中,考虑到结界面粗糙散射,运用BogoliubovdeGennes(BdG)方程和FurusakiTsukada(FT)电流公式,计算超导结中的准粒子传输系数和直流Josephson电流.结果表明:sId超导结的直流Josephson电流随温度以及结两侧的相位差变化的关系曲线强烈地依赖于d波超导体的晶轴方位;结界面的粗糙散射对Josephson电流有抑制作用 关键词： s/I/d超导结 dx2-y2波超导体 直流Josephson电流     

Effect of nonlinear wave-current interaction on flow fields and hydrodynamic forces

A fifth-order theory for solving the problem of interaction between Stokes waves and exponential profile currents is proposed. The calculated flow fields are compared with measurements. Then the errors caused by the linear superposition method and approximate theory are discussed. It is found that the total wavccurrent field consists of pure wave, pure current and interaction components. The shear current not only directly changes the flow field, but also indirectly does so by changing the wave parameters due to wave-current interaction. The present theory can predict the wave kinematics on shear currents satisfactorily. The linear superposition method may give rise to more than 40% loading error in extreme conditions. When the apparent wave period is used and the Wheeler stretching method is adopted to extrapolate the current, application of the approximate theory is the best. Project supported by the Chinese Academy of Sciences.