用BBO晶体产生196～228nm波长的紫外辐射

本文报道了用BBO晶体通过混频产生196～228nm可调谐紫外辐射的研究结果.产生200nm及222nm的量子转换效率分别为12%及23%,与理论计算值基本相符.     

单晶光纤损耗谱测量装置

本文描述了一套用以测量单晶光纤损耗谱的装置。本装置由卤钨灯,单色仪,积分球,AgORbCs光电倍增管以及数据采集,处理和控制系统组成。可测量300～1150nm的光谱范围。利用本装置可获得单晶光纤的吸收光谱,透过率谱,散射光谱以及散射位置谱。     

氙灯泵浦的NYAB晶体调Q激光运转特性及实验研究

首次报道了氙灯泵浦的自激活自倍频NYAB复合功能晶体的BDN染料片调Q运转,获得了自倍频绿光单脉冲.测量了不同L和T_o情况下的绿光脉冲的能量、脉宽和峰值功率.文中还从理论上推导了自激活自倍频晶体调Q激光器的方程组.数值求解方程组,所得的理论数据与实验结果很好地相符.最后,讨论了进一步提高绿光脉冲峰值功率的途径.     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007     

Geometric and Combinatorial Realizations of Crystal Graphs

For irreducible integrable highest weight modules of the finite and affine Lie algebras of type A and D, we define an isomorphism between the geometric realization of the crystal graphs in terms of irreducible components of Nakajima quiver varieties and the combinatorial realizations in terms of Young tableaux and Young walls. For type A_n⁽¹⁾, we extend the Young wall construction to arbitrary level, describing a combinatorial realization of the crystals in terms of new objects which we call Young pyramids. Presented by P. Littleman Mathematics Subject Classifications (2000) Primary 16G10, 17B37. Alistair Savage: This research was supported in part by the Natural Sciences and Engineering Research Council (NSERC) of Canada and was partially conducted by the author for the Clay Mathematics Institute.     

带有奇异项的临界增长p-Laplace方程的非平凡解

本文研究了一种带有奇异项的临界增长p-Laplace方程在N维空间中的有界集上非平凡解的问题,利用山路引理和集中紧性原理,得出方程在非线性项满足一定条件下有非平凡解的结果.     

Cathodoluminescence study of extended defects in hydrothermal ZnO crystals

Understanding the luminescence of ZnO is very important for some applications. In spite of the many studies carried out, there are still some points concerning the origin of some of the luminescence emissions in ZnO crystals that require additional study; in particular, the role of extended defects remains to be a matter of controversy. We present here a cathodoluminescence analysis of the defects generated by Vickers indentation in hydrothermal HTT crystals. Special emphasis was paid to the luminescence band peaking around 3.3 eV. The origin of this band is a matter of controversy, since it has been related to different causes, extended defects being one of the candidates for this emission. The CL images were acquired around crystal defects. It is observed that the 3.3 eV emission is enhanced around the crystal defects; though it is also observed, but weaker, out of the defect regions, which suggests that there exist two luminescence emissions peaking very close to 3.3 eV. The two emissions, one related to structural defects and the other to the LO phonon replica of the free excitonic band, appear very close each other and their relative intensity should determine the shape of the spectrum.     

Converged properties of clean metal surfaces by all-electron first-principles calculations

All-electron full-potential linearized augmented plane-wave calculations of the surface energy, work function, and interlayer spacings of close-packed metal surfaces are presented, in particular, for the free-electron-like metal surfaces, Mg(0 0 0 1) and Al(1 1 1), and for the transition metal surfaces, Ti(0 0 0 1), Cu(1 1 1), Pd(1 1 1), and Pt(1 1 1). We investigate the convergence of the surface energy as a function of the number of layers in the slab, using the Cu(1 1 1) surface as an example. The results show that the surface energy, as obtained using total energies of the slab and bulk from separate calculations, converges well with respect to the number of layers in the slab. Obviously, it is necessary that bulk and surface calculations are performed with the same high accuracy. Furthermore, we discuss the performance of the local-density and generalized gradient approximations for the exchange-correlation functional in describing the various surface properties.     

Bayes估计的进一步研究及其Pitman最优性

对线性模型参数,讨论了Bayes估计的Pitman最优性,将已有结果进行了改进,去掉了附加条件,证明了在Pitman准则下,Bayes估计一致优于最小二乘估计(LSE),在此基础上,提出了一种基于先验信息的方差分量估计,通过和基于LSE的方差分量估计作比较,证明了新估计是无偏估计且有更小的均方误差．最后,证明了在Pitman准则下生长曲线模型参数的Bayes估计优于最佳线性无偏估计．     

Growth Behavior of CdS Nanoparticles Embedded in Polymer and Sol-Gel Silica Matrices: Relationship with Surface-State Related Luminescence

Chemical techniques were employed to synthesize CdS nanoparticles embedded in polymer (PEG 300) and sol-gel silica matrices. Systematic growth of particles (radius 3–9 nm) was obtained by adjusting post-deposition annealing temperature and time to examine the dependence of surface-state–related luminescence on particle size. Photoluminescence (PL) peak energy showed a linear dependence with a gentle slope in the weak confinement region and a steep slope in the strong confinement region, the divergence being observed near the excitonic Bohr radius for CdS. The empirical relation proposed for the weak confinement region could be used for estimating chemically prepared CdS nanoparticle size with a high degree of reliability from PL peak energy.