太阳光谱辐照度绝对测量及其定标单色仪

为满足高精度太阳光谱辐照度绝对测量的需求,研制了太阳光谱辐照度绝对测量系统及其定标单色仪。介绍了太阳光谱辐照度绝对测量的现状,并着重介绍了太阳定标单色仪和积分球太阳光谱仪的设计方案,以及高精度辐射定标传递链路。设计用于太阳光谱辐照度绝对测量的太阳定标单色仪和积分球太阳光谱仪,通过低温绝对辐射计和太阳定标单色仪实现绝对定标,使积分球太阳光谱仪测量数据可溯源至国际基本单位(SI)。结果表明:太阳定标单色仪的光谱范围覆盖300~2 400 nm,光谱分辨率为3~10 nm,输出单色太阳光功率的不确定度为0.2%~0.5%;积分球太阳光谱仪的光谱范围覆盖300~2 500 nm,光谱分辨率为1~8 nm,太阳光谱辐照度绝对测量精度最高可达0.5%。用低温绝对辐射计和太阳定标单色仪绝对定标积分球太阳光谱仪,可以实现高精度太阳光谱辐照度的绝对测量。     

HEPS-TF超导3W1扭摆磁铁控制系统的设计

介绍了中国高能同步辐射光源验证装置(HEPS-TF)中超导3W1扭摆磁铁控制系统的设计。该控制系统主要包括电源控制系统和低温信号监测系统。整个控制系统基于实验物理及工业控制系统(EPICS),其硬件结构以串口服务器为核心,将接口转换为标准的RS232/485接口。软件方面,通过应用StreamDevice设备驱动模块开发了基于Modbus协议的EPICS驱动,缩短了设备驱动的开发周期。上层控制界面采用嵌入了EPICS Qt框架的Qt Creator开发,增强了其灵活性。目前控制系统的离线测试已完成。     

Cryogenic radiometer based absolute spectral power responsivity calibration of integrating sphere radiometer to be used in power measurements at optical fiber communication wavelengths

This paper covers the absolute spectral power responsivity calibration of spectralon-coated Integrating Sphere Radiometer (ISR) equipped with 3 mm diameter InGaAs photodiode to be used as a transfer standard in fiber optic power measurements against Electrical Substitution Cryogenic Radiometer (ESCR) in Optics Laboratory of National Metrology Institute (TUBITAK UME) of Turkey. The initial uncertainty arising from the use of the Electrically Calibrated Pyroelectric Radiometer (ECPR) as a transfer standard in radiometric scale is 0.5% (k=2), which particularly comes from irregularity in the surface homogeneity of ECPR. In order to eliminate the ECPR step as well as its initial uncertainty contribution in fiber optic power measurements, the calibration application herein was carried out. Moreover power stabilization measurements of DFB laser sources at both 1309.1 nm and 1549.0 nm, the beam size determinations, and spectral analyses of these laser sources as well as spatial and angular dependence of spectral responsivities of the ISR were presented in this paper. The total expanded uncertainties were calculated as 0.283% and 0.315% in the determination of absolute spectral power responsivities of the ISR for 1309.1 nm and 1549.0 nm wavelengths respectively (k=2).     

Imaging of Self‐Assembled Structures: Interpretation of TEM and Cryo‐TEM Images

The investigation of solution‐borne nanostructures by transmission electron microscopy (TEM) is a frequently used analytical method in materials chemistry. In many cases, the preparation of the TEM sample involves drying and staining steps, and the collection of images leads to the interaction of the specimen with the electron beam. Both aspects call for cautious interpretation of the resulting electron micrographs. Alternatively, a near‐native solvated state can be preserved by cryogenic vitrification and subsequent imaging by low‐dose cryogenic TEM. In this Minireview, we provide a critical analysis of sample preparation, and more importantly, of the acquisition and interpretation of electron micrographs. This overview should provide a framework for the application of (cryo)‐TEM as a powerful and reliable tool for the analysis of colloidal and self‐assembled structures with nanoscopic dimensions.     

缩水甘油胺型聚氨酯胶粘剂的性能研究北大核心CSCD

采用商品化SKE-1型环氧树脂对自制聚氨酯预聚体(NCOPU)进行封端,制备了缩水甘油胺型聚氨酯(GAPU),并用傅里叶-红外光谱(FT-IR)对其结构进行表征,用在线FT-IR监控间苯二甲胺固化GAPU过程,用差示量热扫描(DSC)研究其相分离,用扫描电镜(SEM)观察固化物的表面微观形貌,用热重(TG)分析固化物的热力学稳定性。探讨了聚丙二醇(PPG)分子量的大小、不同质量分数的SKE-1对NCOPU封端及不同种类的固化剂对GAPU固化物力学性能的影响。研究表明:在60℃时用间苯二甲胺固化GAPU,2h即可固化完全,固化物热稳定性能良好,其外推起始分解温度为248.3℃,5%的分解温度为282.6℃。GAPU固化物的力学性能随着GAPU的环氧值减小而减小,在室温以上力学性能下降,在-196℃力学性能增加,其环氧值为0.153,在-196℃的拉伸剪切强度最佳,为16.11MPa。     

高真空多层绝热容器真空丧失后传热研究综述

高真空多层绝热低温容器突然的真空丧失可能会引发重大的安全事故.文中综述了国内外研究者在高真空多层绝热低温容器突然的真空丧失方面的研究成果,并对未来的研究方向进行了讨论和展望.     

纯引力轨道验证质量辐射计效应分析

纯引力轨道飞行器在精密导航、重力场测量以及基础科学研究等方面具有重要意义,辐射计效应是纯引力轨道验证质量的重要干扰力之一．针对内编队重力场测量系统,利用解析和数值计算相结合的方法,分析了内卫星辐射计效应与内编队系统参数的关系,并给出了适宜于工程计算的内卫星辐射计效应近似函数及其修正因子．分析可知,内卫星辐射计效应与腔体平均压力成正比,与腔体平均温度成反比;随腔体温差的增加而增加,随外卫星腔体半径的增加存在极小值,并且取极小值时外卫星腔体半径和内卫星半径比为常数1.189 4,这一常数是由内外卫星的球形腔体构型决定的,与腔体内温度和压力无关．当内外卫星半径比大于10时,可认为外卫星腔体充分大,此时内卫星辐射计效应与内卫星半径的平方近似成正比,随外卫星腔体半径的变化可忽略．     

Establishment of Illuminance Scale at UME with an Accurately Calibrated Radiometer

Traceability in illuminance measurements at the National Metrology Institute of Turkey (TüBITAK-UME) was established in 2003 with a detector-based realization. The new measurement technique was developed for the determination of illuminance responsivity and upgrating of the illuminance scale. The unit of the illuminance responsivity, in A/lx, was measured with an expanded uncertainty of 0.2% (k = 2) by supplying using the developed scanning technique for the calculation of color correction factor. The surface of a radiometer was scanned using a double-monochromator facility upgraded with an x-y scanning system. The illuminance responsivity as a function of bandpass and temperature were also investigated in this study. To use a radiometer in the photometric applications of metrology, a light-sensitive device, a so-called trap detector, was characterized by measuring the absolute responsivity, the non-linearity, and spatial non-uniformity.