Reversible nonlinear conduction in high‐density polyethylene/acetylene carbon black composites at various ambient temperatures

The reversible nonlinear conduction (RNC) in of high‐density polyethylene/acetylene carbon black composites with different degrees of crosslinking was studied above room temperature and below the melting point of high‐density polyethylene (HDPE). The experimental current density‐electric field strength curves can be overlapped onto a master curve, suggesting that the microscopic mechanisms for the appearance of RNC exist regardless of the ambient temperature and the crosslinking degree of the HDPE matrix. The relationship between the crossover current density and the linear conductivity can be explained in the framework of the dynamic random‐resistor‐network model. According to these results, two electron‐tunneling models are suggested to interpret the microscopic conduction behavior. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1212–1217, 2004     

Desorption behavior of a surfactant in a linear low‐density polyethylene blend at elevated temperatures

The desorption behavior of a surfactant in a linear low‐density polyethylene (LLDPE) blend at elevated temperatures of 50, 70, and 80 °C was studied with Fourier transform infrared spectroscopy. The composition of the LLDPE blend was 70:30 LLDPE/low‐density polyethylene. Three different specimens (II, III, and IV) were prepared with various compositions of a small molecular penetrant, sorbitan palmitate (SPAN‐40), and a migration controller, poly(ethylene acrylic acid) (EAA), in the LLDPE blend. The calculated diffusion coefficient (D) of SPAN‐40 in specimens II, III, and IV, between 50 and 80 °C, varied from 1.74 × 10^?11 to 6.79 × 10^?11 cm²/s, from 1.10 × 10^?11 to 5.75 × 10^?11 cm²/s, and from 0.58 × 10^?11 to 4.75 × 10^?11 cm²/s, respectively. In addition, the calculated activation energies (E_D) of specimens II, III, and IV, from the plotting of ln D versus 1/T between 50 and 80 °C, were 42.9, 52.7, and 65.6 kJ/mol, respectively. These values were different from those obtained between 25 and 50 °C and were believed to have been influenced by the interference of Tinuvin (a UV stabilizer) at elevated temperatures higher than 50 °C. Although the desorption rate of SPAN‐40 increased with the temperature and decreased with the EAA content, the observed spectral behavior did not depend on the temperature and time. For all specimens stored over 50 °C, the peak at 1739 cm^?1 decreased in a few days and subsequently increased with a peak shift toward 1730 cm^?1. This arose from the carbonyl stretching vibration of Tinuvin, possibly because of oxidation or degradation at elevated temperatures. In addition, the incorporation of EAA into the LLDPE blend suppressed the desorption rate of SPAN‐40 and retarded the appearance of the 1730 cm^?1 peak. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1114–1126, 2004     

Effects of poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] on the charge distributions of low‐density polyethylene/polystyrene blends

The effect of the triblock copolymer poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] (SEBS) on the formation of the space charge of immiscible low‐density polyethylene (LDPE)/polystyrene (PS) blends was investigated. Blends of 70/30 (wt %) LDPE/PS were prepared through melt blending in an internal mixer at a blend temperature of 220 °C. The amount of charge that accumulated in the 70% LDPE/30% PS blends decreased when the SEBS content increased up to 10 wt %. For compatibilized and uncompatibilized blends, no significant change in the degree of crystallinity of LDPE in the blends was observed, and so the effect of crystallization on the space charge distribution could be excluded. Morphological observations showed that the addition of SEBS resulted in a domain size reduction of the dispersed PS phase and better interfacial adhesion between the LDPE and PS phases. The location of SEBS at a domain interface enabled charges to migrate from one phase to the other via the domain interface and, therefore, resulted in a significant decrease in the amount of space charge for the LDPE/PS blends with SEBS. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2813–2820, 2004     

Carousels,Zindler curves and the floating body problem

A carousel is a dynamical system that describes the movement of an equilateral linkage in which the midpoint of each rod travels parallel to it. They are closely related to the floating body problem. We prove, using the work of Auerbach, that any figure that floats in equilibrium in every position is drawn by a carousel. Of special interest are such figures with rational perimetral density of the floating chords, which are then drawn by carousels. In particular, we prove that for some perimetral densities the only such figure is the circle, as the problem suggests.     

The evolution of a truncated gaussian probability density through time—modelling animal liveweights after selection

The form of the probability density derived from the evolution in time of a previously truncated frequency distribution of animal Liveweights is of interest in animal husbandry. Truncated frequency distributions arise when the heavier animals are sold for slaughter and the lighter animals retained. The demands of modern quality assurance schemes require that, given information on animal growth, the farmer is able to estimate the number of animals that would meet the specifications at some time in the future after truncation. Assuming that animal growth can be described by a linear stochastic differential equation, we derive an explicit expression for the probability density of animal Liveweights at any time after the truncation of an initial Gaussian density. It is shown that this probability density converges rapidly to a Gaussian density, so that after about 20 days of typical growth rates for lambs, the resulting density is practically indistinguishable from Gaussian.     

脉冲充磁的超导圆盘的电流密度和俘获场分布的研究

本从第一性原理出发，计算了充磁线圈产生的磁场，脉冲充磁的超导圆盘中的感应电流密度和俘获场分布．以超导体中的电流运动方程为基础，通过磁通动力学方程E=Ec(J/Jc)^n和物质方程B=μ0H表示超导圆盘的超导特性．计算表明第一个脉冲充磁电流的峰值和磁通蠕动指数对于超导圆盘中的感应电流分布非常重要．同时研究了充磁电流的宽度，波形，第二个充磁电流的峰值和充磁线圈的形状对于俘获场的影响．计算表明不断减小脉冲充磁电流峰值的反复充磁可以保持超导圆盘中的感应电流密度的平台在一确定水平．     

F／Cl比与Eu~（2＋）：BaFCl中F色心的浓度和光激励截面的关系

研究了Ｅｕ（２＋）：ＢａＦｘＣｌ２在紫外线辐照下的光激励发光。通过改变激励方式及激励光的扫描方向，给出了Ｅｕ（２＋）：ＢａＦｘＣｌ２－ｘ光激励发光过程中，两种Ｆ色心的浓度比值与光激励截面比值的测定方法。利用这种测定方法，进一步研究了两种Ｆ色心的浓度比值和光激励截面比值与Ｆ／ＣＩ比值的关系。     

聚类分析在髁突骨密度分析中的应用

本研究应用聚类分析的方法，对人离休髁突×片进行数字图像技术处理所获得的影像密度数值做了详细分析，取得人髁突不同区的骨密度分布及不同年龄阶段髁突密度变化的情况。该方法避免了人为因素的影响，其结果较客观地反映了髁突的骨质密度；为研究病理状态时髁突骨密度的改变提供参考。     

用多路逆磁系统测量热电子环磁镜中热电子沿轴向的分布

本文介绍了多路逆磁测量方法及利用这一方法在ＨＥＲ装置上测量热电子环沿轴向的长度与晃荡电子密度的轴向分布的实验结果。