Photo-detachment cross section of H- near two parallel interfaces

The photo-detachment cross section of H^- near two parallel elastic interfaces is derived and calculated by using the closed orbit theory. The photo-detachment cross section of H^- near two interfaces is shown to exhibit multi-periodic oscillations when the distance between the H^- and the interface is varied. Each peak in the Fourier transformed photo-detachment cross section corresponds to the length of a closed orbit, which is quite similar to the case of atomic spontaneous emissions in a dielectric slab. This study provides a new understanding of the photo=detachment process of H^- in the presence of interfaces.     

非相干光宽带腔增强吸收光谱技术应用于SO_2弱吸收的测量

非相干光宽带腔增强吸收光谱作为高灵敏检测技术,已成功应用于多种大气痕量气体浓度的测量。根据腔增强吸收光谱技术测量原理可知,若已知测量气体准确浓度,镜片反射率随波长的变化曲线、有效吸收长度、光学腔内有无测量气体吸收前后的光辐射变化,可测量出待测气体的吸收截面。SO_2由于a~3 B_1—X~1 A_1自旋禁阻跃迁,在345~420nm波段吸收截面较低(~10~(-22) cm2/molecule),其测量有一定难度,而准确的弱吸收截面对于卫星反演大气痕量气体浓度以及大气研究等方面均有重要意义。采用365nm LED光源的宽带腔增强吸收光谱实验装置测量357~385nm波段范围SO_2的弱吸收,获得该波段SO_2弱吸收截面,并与已公开发表的SO_2吸收截面进行对比,相关系数r为0.997 3,验证了非相干光宽带腔增强吸收光谱技术准确测量气体弱吸收截面的适用性。     

Excitation dependent quenching of luminescence in LED phosphors

Droop, the decrease of efficiency with increased power density, became a major topic with InGaN LEDs, after its introduction in 2007. This paper provides insight into droop in localized center luminescence phosphors, exemplified here by Eu²⁺ doped materials. This topic is of increasing importance, as high brightness blue LEDs have reached outputs >1 W/mm². The nonlinearities in phosphor quantum efficiency result in drive‐dependent color point shift and reduction of overall efficiency of phosphor converted white LEDs which utilize Eu²⁺ activated phosphors. The efficiency quenching can be traced back to two processes, well‐known in laser physics, excited state absorption or/and cross relaxation by Foerster/Dexter transfer. Both processes lead to reduction in phosphor efficiency, but they can be differentiated. Understanding the root cause of efficiency quenching opens ways to minimize the practical consequences. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

基于双核模型对超重元素合成机制的研究

在双核模型基础上，考虑了熔合与准裂变的竞争，通过数值法求解主方程，计算了⁵⁰Ti，⁵⁸Fe+²⁰⁸Pb，²⁰⁹Bi这4个反应系统通过冷熔合反应合成超重元素的激发函数，得到了与实验比较符合的结果.计算了不同入射能量时各角动量分波对熔合概率和超重核存活概率的影响以及对蒸发剩余截面的贡献.这些结果对进一步理解超重核的合成机制有重要意义. 关键词： 超重元素 双核模型 熔合反应 蒸发剩余截面     

Effect of initial-state target polarization on single ionization of helium by 1-keV electron impact

We report new results of triple differential cross sections for the single ionization of helium by 1-KeV electron impact at the ejection energy of 10 eV. Investigations have been made for both the perpendicular plane and the plane perpendicular to the momentum transfer geometries. The present calculation is based on the three-Coulomb wave function. Here we have also incorporated the effect of target polarization in the initial state. A comparison is made between the present calculation with the results of other theoretical methods and a recent experiment [D黵r M, Dimopoulou C, Najjari B, Dorn A, Bartschat K, Bray I, Fursa D V, Chen Z, Madison D H and Ullrich J 2008 Phys. Rev. A 77 032717]. At an impact energy of 1 KeV, the target polarization is found to induce a substantial change of the cross section for the ionization process. We observe that the effect of target polarization plays a dominant role in deciding the shape of triple differential cross sections.     

10－5000 伏下电子被多原子分子CF4, CF3H, C2F4, C2F6, 及 C2H3F3散射总结面的计算

利用可加性规则和光学势方法计算了能量在10-5000 eV范围内电子被多原子分子CF4, CF3H, C2F4, C2F6, 及 C2H3F3的总结面，并与已有的实验结果和理论计算进行了比较，与这些结果符合得很好。对于CF4, CF3H, C2F4, C2F6, 及 C2H3F3在1000eV以上没有实验数据，本文对实验研究提供了对比和预测的数据。     

Total cross sections for electrons scattering from simple molecules containing the larger atom sulfur at 30-5000eV

A complex optical model potential modified by the concept of bonded atom, which takes into consideration the overlapping effect of electron clouds, is employed to calculate the total cross sections for electrons scattering from simple molecules （SO2, H2S, OCS, CS2 and SO3） containing the larger atom, sulfur, at 30-5000eV by using the additivity rule model at Hartree-Fock level. The quantitative molecular total cross section results are compared with those obtained in experiments and other calculations wherever available, and good agreement is obtained. It is shown that the additivity rule model together with the complex optical model potential modified by the concept of bonded atom can give the results closer to the experiments than the one unmodified by it. So, the introduction of bonded-atom concept in complex optical model potential betters the accuracy of the total cross section calculations of electrons from the molecules containing the larger atom, sulfur.     

Production mechanism of superheavy nuclei in massive fusion reactions

Within the concept of the dinuclear system (DNS), a dynamical model is proposed for describing the formation of superheavy nuclei in complete fusion reactions by incorporating the coupling of the relative motion to the nucleon transfer process. The capture of two heavy colliding nuclei, the formation of the compound nucleus and the de-excitation process are calculated by using an empirical coupled channel model, solving a set of microscopically derived master equations numerically and applying statistical theory, respectively. Fusion-fission reactions and evaporation residue excitation functions of synthesizing superheavy nuclei (SHN) are investigated systematically and compared them with available experimental data. The possible factors that affecting the production cross sections of SHN are discussed in this workshop.     

A tunable infrared plasmonic polarization filter with asymmetrical cross resonator

A tunable infrared plasmonic polarization filter is proposed and investigated in this paper. The filter is based on the sandwich absorption structure which consists of three layers. The top layer is an array of asymmetrical cross resonator.The middle and bottom layers are dielectric spacer and metal film respectively. By absorbing specific wavelength of the incident light perfectly, the reflection spectrum of the structure shows filter performance. The calculated results show that the absorption wavelength is strongly dependent on the length of branch of the asymmetrical cross resonator which is parallel to the light polarization and independent of the length of the vertical one. Therefore, the asymmetrical cross resonator filter structure opens the way for freely tuning the filtering wavelength for a different light polarization. We can fix a resonant wavelength(absorption wavelength) corresponding to one polarization and change the resonant wavelength for the other polarization by adjusting the corresponding branch length of the asymmetrical cross resonator, or change the two resonant wavelengths of both two polarizations at the same time.     

电子白板系统中参数标定方法的研究

为了避开复杂繁琐的摄像机标定过程,提出了一种基于CCD摄像机的电子白板系统参数标定新方法,实现了开机自动标定系统参数的功能。采用Harris角点检测算法成功提取了参考点的像素坐标,并直接运用射影变换交比不变性,推导出白板边框图像像素距离与实际物理距离的映射关系式,进而获得了摄像机的光心坐标。简要分析影响系统标定精度的因素,并设计出减小标定误差的方案,最后搭建实验平台标定系统参数。实验结果表明:该标定方法实现简单,应用方便,且对于单位长度为1 cm的标定块而言,标定误差小于0.04 cm。