Oxidative coupling of methane in a dual-bed reactor comprising of particle/cordierite monolithic catalysts

A dual-bed reactor was constructed comprising of a 5%Na2WO4-2%Mn/SiO2 particle catalyst and a 4%Ce-5%Na2WO4-2%Mn/SiO2/cordierite monolithic catalyst. The reaction performance of the oxidative coupling of methane (OCM) over the dual-bed reactor system was evaluated. The effects of the bed height and operation mode, as well as the reaction parameters such as reaction temperature, CH4/O2 ratio and flowrate of feed gas, on the catalytic performance were investigated. The results indicated that the suggested dual-bed reactor exhibited a good performance for the OCM reaction when the feed gases firstly passed through the particle catalyst bed and then to the monolithic catalyst bed. A CH4 conversion of 38.2% and a C2H4 selectivity of 43.3% could be obtained using the dual-bed reactor with a particle catalyst bed height of 10 mm and a monolithic catalyst bed height of 50 mm. Both the CH4 conversion and C2H4 selectivity have increased by 2.5% and 12.8%, respectively, as compared with the 5%Na2WO4-2%Mn/SiO2 particle catalyst in a conventional single-bed reactor and by 12.9% and 23.0%, respectively, as compared with the 4%Ce-5%Na2WO4-2%Mn/SiO2/cordierite monolithic catalyst in a single-bed reactor. The catalytic performance of the OCM in the dual-bed reactor system has been improved remarkably.     

Suppressed formation of CO2 and H2O in the oxidative coupling of methane over La2O3/MgO catalyst by surface modification

Oxidative coupling of methane (OCM) is a promising way to convert methane into C_2 hydrocarbons. However, CO_2 and H_2O are by-products of the reaction. To utilize the higher activity of lanthanum oxide and save its usage, MgO supported La_2O_3 catalyst was prepared. Surface modification of the catalyst with nitric acid was made to suppress the formation of the by-products. Experimental results indicated that the addition of nitric acid increased the surface oxygen species with binding energy of ca. 531.7 eV and at the same time reduced the pore volume of the catalyst. These effects of nitric acid finally led to the increase of C_2 selectivity and the decrease of the by-products formation. Hydrogen selectivity was found about 14%- 18% over the catalysts adopted in this work.     

Double-CO3(2-) centered [Co(II)5] wheel and modeling of its magnetic properties

A high-spin Co(II) cluster with a rare pentagonal molecular structure and formula [Co(5)(CO(3))(2)(bpp)(5)]ClO(4) (1; Hbpp is 2,6-bis(phenyliminomethyl)-4-methylphenolate) has been synthesized and characterized by single-crystal X-ray diffraction. This topology arises from fusing five [Co(2)(bpp)] moieties in a cyclic manner around two CO(3)(2-) central ligands, resulting in propeller-like configuration. The irregular coordination of the carbonate ions to the metal centers results in a combination of coordination numbers (CNs) of the Co(II) ions of five and six. The bulk magnetization of this complicated magnetically exchanged system has been modeled successfully by employing a matrix diagonalization technique. For this, the combination of S=3/2 ions (CN=5) with ions exhibiting strong spin-orbit coupling (CN=6) has been considered and a perturbative approach to handle the data in the whole studied range of temperatures (2-300 K) yielding parameters of g and D (for the five-coordinate Co(II) ions), of A, κ, λ, and Δ (for the metals with spin-orbit coupling) and of the exchange constants J. The agreement with results from DFT calculations, also presented here, is remarkable.     

Phase‐Controlled Synthesis of Transition‐Metal Phosphide Nanowires by Ullmann‐Type Reactions

Transition‐metal phosphide nanowires were facilely synthesized by Ullmann‐type reactions between transition metals and triphenylphosphine in vacuum‐sealed tubes at 350–400 °C. The phase (stoichiometry) of the phosphide products is controllable by tuning the metal/PPh₃ molar ratio and concentration, reaction temperature and time, and heating rate. Six classes of iron, cobalt, and nickel phosphide (Fe₂P, FeP, Co₂P, CoP, Ni₂P, and NiP₂) nanostructures were prepared to demonstrate the general applicability of this new method. The resulting phosphide nanostructures exhibit interesting phase‐ and composition‐dependent magnetic properties, and magnetic measurements suggested that the Co₂P nanowires with anti‐PbCl₂ structure show a ferromagnetic–paramagnetic transition at 6 K, while the MnP‐structured CoP nanowires are paramagnetic with Curie–Weiss behavior. Moreover, GC‐MS analyses of organic byproducts of the reaction revealed that thermally generated phenyl radicals promoted the formation of transition‐metal phosphides under synthetic conditions. Our work offers a general method for preparing one‐dimensional nanoscale transition‐metal phosphides that are promising for magnetic and electronic applications.     

Synthesis of the Phenylpyridal Scaffold as a Helical Peptide Mimetic

Phenylpyridal‐ and phenyldipyridal‐based scaffolds have been designed and synthesized as novel helical peptide mimetics. The synthesis required optimisation and selective alkylation in producing 2,6‐functionalized 3‐hydroxypyridine derivatives for a convergent scheme. The pyridine analogues were coupled by a series of Suzuki/Stille types cross‐coupling reactions. A series of biaryl and ter‐aryl substituted heterocycles were produced. The synthetic approach was concise and high yielding allowing large variability at the wanted side‐chain attachment points. A number of compounds were synthesised to show the versatility of the strategy.     

Direct Synthesis of Titanium Complexes with Chelating cis‐9,10‐Dihydrophenanthrenediamide Ligands through Sequential C?C Bond‐Forming Reactions from o‐Metalated Arylimines

A series of new titanium(IV) complexes with o‐metalated arylimine and/or cis‐9,10‐dihydrophenanthrenediamide ligands, [o‐C₆H₄(CH?NR)TiCl₃] (R=2,6‐iPr₂C₆H₃ ( 3 a ), 2,6‐Me₂C₆H₃ ( 3 b ), tBu ( 3 c )), [cis‐9,10‐PhenH₂(NR)₂TiCl₂] (PhenH₂=9,10‐dihydrophenanthrene; R=2,6‐iPr₂C₆H₃ ( 4 a ), 2,6‐Me₂C₆H₃ ( 4 b ), tBu ( 4 c )), [{cis‐9,10‐PhenH₂(NR)₂}{o‐C₆H₄(HC?NR)}TiCl] (R=2,6‐iPr₂C₆H₃ ( 5 a ), 2,6‐Me₂C₆H₃ ( 5 b ), tBu ( 5 c )), have been synthesised from the reactions of TiCl₄ with o‐C₆H₄(CH?NR)Li (R=2,6‐iPr₂C₆H₃, 2,6‐Me₂C₆H₃, tBu). Complexes 4 and 5 were formed unexpectedly from the reactions of TiCl₄ with two or three equivalents of the corresponding o‐C₆H₄(CH?NR)Li followed by sequential intramolecular C? C bond‐forming reductive elimination and oxidative coupling reactions. Attempts to isolate the intermediates, [{o‐C₆H₄(CH?NR)}₂TiCl₂] ( 2 ), were unsuccessful. All complexes were characterised by ¹H and ¹³C NMR spectroscopy, and the molecular structures of 3 a , 4 a – c , 5 a , and 5 c were determined by X‐ray crystallography.     

Transition‐Metal‐Free Formal Sonogashira Coupling and α‐Carbonyl Arylation Reactions

Transition‐metal‐free formal Sonogashira coupling and α‐carbonyl arylation reactions have been developed. These transformations are based on the nucleophilic aromatic substitution (S_NAr) of β‐carbonyl sulfones to electron‐deficient aryl fluorides, producing a key intermediate that, depending on the reaction conditions, gives the aromatic alkynes or α‐aryl carbonyl compounds. The development of these reactions is presented and, based on investigations under basic and acidic conditions, mechanisms have been proposed. To develop the formal Sonogashira coupling further, a milder, two‐step protocol is also disclosed that expands the reaction concept. The scope of these reactions is demonstrated for the synthesis of Sonogashira and α‐carbonyl arylated products from a range of electron‐deficient aryl fluorides with a variety of functional groups and aryl‐, heteroaryl‐, alkyl‐, and alkoxy‐substituted sulfone nucleophiles. These transition‐metal‐free reactions complement the metal‐catalyzed versions in terms of substitution patterns, simplicity, and reaction conditions.     

Broken symmetry density functional study of a mixed‐valence unsymmetrical dinuclear iron complex

Density functional theory (DFT) calculations with different exchange‐correlation functionals were performed for a mixed valence Fe(II)/Fe(III) binuclear complex with μ‐methoxo and two μ‐carboxylate bridging ligands, (1) with geometry optimizations being performed for all possible spin multiplicities (M_S = 2, 4, 6, 8, and 10). Within the exchange‐correlation functionals studied, only the hybrid GGA functionals B3P and B3LYP and also the pure GGA functional RPBE, predicts the geometry with high spin (S = 9/2) to be more stable than the geometry with low spin state (S = 1/2) by 20 kcal/mol, in agreement with the experimental findings. These functionals also predict the same stability order for the different spin states, being M_S = 10>8>6>2>4. The meta‐GGA functionals TPSS and TPSSh and also the pure GGA functionals BLYP and BP86 predict different stability orders. The computed average EPR g‐tensor, g_av, of 2.03, at the B3LYP level, is in good agreement with the experimental findings. Heisenberg exchange coupling constants, J, were calculated within the broken‐symmetry formalism, at the B3LYP level, showing that the two iron centers are antiferromagnetic coupling, with a very weak coupling constant of about ?7 cm^?1, in good agreement with the experimental value. Additionally, the effect of using different multiplicities of the reference geometries on the computed J value is discussed. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010