Transport efficiency in femtosecond laser ablation inductively coupled plasma mass spectrometry applying ablation cells with short and long washout times

Relative mass transport efficiencies of near infrared (λ = 795 nm) femtosecond laser generated brass aerosols in helium were measured by ICP-MS applying different ablation cells with short and long washout times. It was found that the transport efficiencies are independent of the cell used within the mutual experimental uncertainties. This finding was confirmed by additional measurements providing the absolute particle mass transport efficiencies of femtosecond laser ablation in He. Here, the transport efficiencies were determined by weighing the samples before and after ablation with a micro-balance, collecting the particles by low-pressure impaction, and evaluating the impacted masses quantitatively by total reflection X-ray fluorescence. Within the experimental uncertainties (± 9–19%) the same absolute transport efficiency (about 77%) was found for all cells applied. This efficiency value can be regarded as a lower limit of the absolute mass transport efficiency since mass losses in the impactor are difficult to quantify.     

Exact Fixed-node Quantum Monte Carlo： Self-optimizing Procedure

In this paper, a novel exact fixed-node quantum Monte Carlo (EFNQMC) algorithm was proposed, which is a self-optimizing and self-improving procedure. In contrast to the previous EFN-QMC method, the importance function of this method is optimized synchronistically in the diffusion procedure, but not be-fore beginning the EFNQMC computation. In order to optimize the importance function, the improved steepest descent tech-nique is used, in which the step size is automatically adjustable.The procedure is quasi-Newton type and converges super linear-ly. The present method also uses a novel trial function, which has correct electron-electron and electron-nucleus cusp condi-tious. The novel EFNQMC algorithm and the novel trial func-tion are employed to calculate the energies of 1 ^1A1 state of CH2, ^1Ag state of Cs and the ground-states of H2, LiH, Li2 and H2O.     

A new algorithm for the fixed-node quantum Monte Carlo method

A novel algorithm is proposed for the fixed-node quantum Monte Carlo (FNQMC) method.In contrast to previous procedures,its "guiding function" is not optimized prior to diffusion quantum Monte Carlo (DMC) computation but synchronistically in the diffusion process The new algorithm can not only save CPU time,but also make both of the optimization and diffusion carried out according to the same sampling fashion,reaching the goal to improve each other This new optimizing procedure converges super-linearly,and thus can accelerate the particle diffusion During the diffusion process,the node of the "guiding function" changes incessantly,which is conducible to reducing the "fixed-node error" The new algorithm has been used to calculate the total energies of states X3B1 and a1A1 of CH2 as well as π-X2B1 and λ-2A1 of NH2 The singlet-triplet energy splitting (λEsT) in CH2 and π energy splitting in NH2 obtained with this present method are (45 542±1.840) and (141.644±1.589) kJ/mol,respectively The calculated     

Electrospray ionization ion-trap multistage mass spectrometric study of sodium cationized aldobiuronic and pseudoaldobiuronic acid derivatives

Fragmentation mechanisms of electrospray ionization (ESI) mass spectrometry of aldobiuronic and pseudoaldobiuronic acid derivatives were elucidated by multistage mass spectrometric (MS(n), n = 2-5) measurements of selected ions. Characteristic under the conditions of ESI-MS analysis is the production of alkali metal (Na and K) cationized adducts. The probability the of locations of Na cations in per-O-methylated compounds was proved by quantum chemical calculations, using the Jaguar program. The most probably position of alkali metal attachment is the carboxy group of the methoxycarbonyl C-5 group of the uronic acid unit. Characteristic cleavages vary according the kind of O-derivatization. In most cases they take place on the acidic part of the dimer and at the interglycosidic oxygen atom. As a result, the criteria for the differentiation of aldobiouronic and pseudoaldobiouronic acids derivatives were elucidated.     

量子点PbS修饰纳米结构TiO2复合膜的光电化学研究

用光电流作用谱、光电流-电势图等光电化学方法研究了ITO(铟锡氧化物导电玻璃)/TiO₂ /Q-PbS(量子点PbS)膜电极的光电转换性质。结果表明，由于量子尺寸的效应，在膜电极制备中，随着ITO/TiO₂电极在饱和Pb(CH₃COO)₂溶液中浸泡时间的不同，所制备的Q-PbS颗粒大小不同，禁带宽度随着浸泡时间的增大而减小，浸泡时间为40 s、在80 ℃烘干下制备的Q-PbS的禁带宽度为1.68 eV，其价带位置为-5.072 eV。Q-PbS修饰ITO/TiO₂电极可使光电流发生明显的红移，从而提高宽禁带半导体的光电转换效率。     

Dynamics of excited m-dichlorobenzene

Dichlorobenzene is a precursor molecule of di-oxins, which are some of the most toxic chemicals and are suspected of being mutagenic with the structure of benzene rings containing different numbers of chlorine atoms. They are seriously harmful to the health of human. Therefore, it is necessary to study these aryl chemicals especially dichlorobenzene molecules in great detail. In recent years, a number of groups have investi-gated the molecules of aryl halide. The near ultraviolet absorption sp…     

液-液萃取电感耦合等离子体质谱法测定天然水中痕量稀土元素

建立了以单、二（2－乙基己基）磷酸酯混合螯合剂的庚烷溶液作为萃取剂，6.0mol/L HCl反萃取预分离富集，In和Rh做内,ICP-MS测定天然水中15种稀土元素的分析方法。方法的富集倍数为200倍，各元素的检出限范围在0.01-1.8ng/L之间，相对标准偏差RSD＜5％，萃取回收率＞93％。     

Cavitands bearing four fluorophores

The synthesis of novel cavitands containing four fluorophores [tert-butoxycarbonyl protected 2,2′-bis(furyl)benzidine (t-BOC FurylBz) or 5,5′-bis(4-aminophenyl)-2,2′-bifuryl (t-BOC PFDA)] and ionophoric functional groups on the upper rim is reported. The cavitands bearing the four fluorophores emit blue light photoluminescence. In particular, the cavitand containing PFDA moieties exhibits a high photoluminescence quantum yield.     

Slurry nebulization ICP-AES spectrometry method for the determination of tin in organotin(IV) complexes

This paper proposes a quick, novel method for tin determination in organotin chemicals by slurry nebulization inductively coupled plasma atomic emission (ICP-AES) spectrometry. The method was tested by the measurement of five organotin carboxylate complexes of known composition for obtaining simple stoichiometric data. The slurries were prepared by first dissolving the organotins in an adequate solvent (methanol, pyridine or acetone) well miscible with water and then adding this solution drop-by-drop to a 0.005% TX-100 tenzide solution while maintaining intensive mixing. Dynamic laser light scattering experiments showed that the average equivalent particle size in the resulting slurry was ≈0.3 μm for all samples and solvents. Under suitable ICP-AES measuring conditions, the signal recoveries were found to be between 101.8 and 106.6%, which allowed direct nebulization and calibration against aqueous solutions. Typically, 70 μg l⁻¹ detection limit and 1–5% relative S.D. on five replicates can be achieved by the described method.     

Determination of boron in boron-alloyed steels by inductively coupled plasma atomic emission spectrometry

An inductively coupled plasma atomic emission spectrometry (ICP-AES) procedure has been developed and examined for the determination of boron content (0.01 up to about 2% B) in boron-alloyed steels such as POLDI ATA BOR (65% Fe, 19%Cr, 12% Ni, 1.5% Mn, 1% B), POLDI ATA BOR EXTRA (62% Fe, 18% Cr, 13% Ni, 2.5% Mo, 1.5% Mn, 1% B) and POLDI ATA BOR-R (75% Fe, 18% Cr, 3.5% Ti, 1.8% B). The steel sample is dissolved with a mixture of hydrochloric, nitric, sulfuric and phosphoric acids in a quartz vessel. Borides of alloyed metals, especially of iron and chromium, are quantitatively decomposed. The presence of phosphoric acid in a sample solution reduces the volatility of boric acid with water vapour.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria